In addition to the sunshade, is there anything else in the sun room that can be insulated?

The insulating board is filled with polyurethane, which is very insulating.

1. Install sunshades. After the construction of the sunroom is completed, the sunshade can be installed on the top of the sunroom, also called the ceiling curtain. At present, there are many types of ceiling curtains on the market, and the materials are also different, mainly divided into automatic and manual, which can be combined with the actual situation of the sun room to choose the right ceiling curtain.

The ceiling curtain is opened when the sun is fierce, which can effectively resist the direct sunlight and avoid the high temperature caused by direct sunlight.

2. Install glass heat insulation film. The heat insulation film can reflect the sunlight due to the surface coated with a layer of dark reflective substance, so as to achieve the effect of heat insulation. Attaching the heat insulation film to the glass can improve the signal energy of the glass, reduce the permeability of the glass, reflect the sunlight, and realize the heat insulation function.

3. Install air-conditioning equipment. The main function of the sunroom is to enjoy the sunshine and get close to nature, but when the temperature of the sunroom is too high, people will feel very uncomfortable staying inside. Therefore, you can choose to install air conditioning equipment in the sun room, and use air conditioning equipment to achieve the purpose of reducing the temperature of the sun room.

However, it is best to avoid the hot sun, preferably in the evening, so that you can enjoy the coolness brought by the air conditioner and watch the sunset.

4. Open a skylight appropriately. When building a sunroom, you can reserve a movable skylight on the roof, and if you have a conditional, larger sunroom, you can also open some windows around it. When the sun hits the sunroom and generates heat, you can open the skylight and window to let the heat out, so as to reduce the temperature in the sunroom.

5. Use low-emissivity coated glass to build a sun room. Before building a sunroom, you can directly choose some building materials with thermal insulation function, such as low-emissivity coated glass. The glass is coated with a film that reflects the sunlight directly and ensures that the interior is lit up.

Because the sunlight of the sunroom is very good, it is necessary to take measures to insulate the sunroom. How does the sun room shade and insulate the sun? What materials can be used for sunroom ceilings? Let's take a look.

How to shade and insulate the sun in the sunroom

1. Electric sunshade sunscreen sunscreen isolation and heat insulation.

Electric sunshade is the most common method of shading and heat insulation, it is to add a sun room electric sunshade or metal material roller shutter curtain in the window, which can not only block ultraviolet rays and heat radiation, but also adjust the light source to further reduce the room temperature.

2. Open the skylight for ventilation and cooling.

The safety skylight at the top of the sunroom is used in conjunction with the window to cause heat convection, and the heat flow can be better discharged into the room.

3. Install sprinkler system software to reduce temperature.

The sprinkler system software installed in the sun room can bring a lot of heat away, achieve the effect of reducing temperature, and can also clean the sun room, killing two birds with one stone. This is very simple, and it can be done immediately with a sprinkler system software.

4. Select raw materials for heat insulation.

For customers who have installed glass, they can directly use Crespen coating to make a layer of thermal insulation, which is convenient and cost-effective without changing glass. For customers who want to make a sunroom, they can use Crespen heat-coated glass to effectively block the invasion of outdoor temperature and ultraviolet rays and radiation sources.

What materials can be used for sunroom ceilings?

1. The sun room decoration ceiling canopy can be made of glass, color gang, broken bridge aluminum doors and windows, etc., in which the roof of the sun room is made of glass, the light transmittance is particularly good, the bearing capacity is relatively strong, easy to clean, very beautiful. However, if you use glass to make it on the roof of the sun room, it is proposed to brush a layer of heat insulation film in the middle and later stages, and the heat insulation film should be brushed on the top of the glass window to play a heat insulation effect, which can basically block 99% of ultraviolet rays.

2. If you use Caigang as the roof of the sun room, it is also very good, because the color steel roof of the sun room is more beautiful and generous, the service life is very long, and it has a certain actual effect of heat insulation, and the heat insulation and heat preservation in winter are also relatively good.

3. If the broken bridge aluminum doors and windows are used as the canopy of the sun room, it is also very good, the broken bridge aluminum doors and windows make the roof of the sun room in Zhishan have a certain permeability, thermal insulation in winter, heat insulation in summer, and also prevent a certain amount of ultraviolet rays, but this material and cost are relatively high.

Sun room sunshade Tansun netizens recommend the external sunshade sunroom electric sunshade to choose the outdoor sunshade mold yang, the inner sunshade seems to block the strong sunshine, but in fact, the heat has come in, and the inner sunshade and ordinary curtains will not help the sunroom to cool down, only in autumn and winter when the weather is not too hot can be used to assist the sunshade, really in the summer with the letter slow season when the heat, the real effect is the outdoor sunshade.

Man-made and synthetic curtains.

Man-made and synthetic curtains. Because it is better than cotton and linen fabrics in terms of shrinkage resistance, fading resistance, and wrinkle resistance, it is suitable for rooms with strong sunlight. Many modern fabrics are blended with natural fibers and man-made or synthetic fibers, thus combining the best of both worlds.

It can be very well insulated from light and heat.