How to install a router in Japan, and can a domestic router be used in Japan

Different brands of routers are installed in a similar way.

1. Router connection method:

1. Cat (modem) -- router WAN port;

2. The LAN port of the router --- the computer.

2. Router configuration method:

1. Open the computer browser and enter the gateway IP address of the nameplate behind the router (generally, enter the gateway configuration interface.

2. Set up the Internet mode. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband password, and select Automatic connection as the connection mode. If DHCP is automatically obtained, you do not need to enter this field.

3. Set the wifi name and password. Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule.

Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

Extended Knowledge: Router Internet Access Mode Selection:

There are three types of router dial-up methods, PPPoE (automatic selection of Internet dial-up mode), dynamic IP (dynamic means that every time you surf the Internet, Telecom will randomly assign an IP address), static IP (static refers to the fixed assignment of an IP address, and this fixed address is used every time).

How to configure routes.

1.Open the IE browser input.

Go to the main page of the route and select the working mode of the route.

Select the corresponding mode, generally home ADSL is to select PPPoE and then fill in the account number and password respectively (twice).

2.Set up wireless.

This is the channel for the wireless signal. Generally, the default is 6. If you find that the wireless signal is unstable, note.

If there is a high-power signal with 6 channels around your home, it is recommended that you change it to 1 or 11 to try, which one is stable and which. Default 6 does not change.

Encrypt or not encrypt. If you want to encrypt, you need to be effective.

It's all set, click on the settings at the bottom. The route is automatically restarted.

3.Set a specific password.

Select "WEP" for the encryption mode at the top, and select 10 digits for the 64bit password below.

Choose 128bit The password is a 25-digit number, generally 64bit is OK, enter the specific password here.

Once you've set it up, you'll be able to surf the web properly.

Summary. Yes, buy a Wi-Fi transmitter by yourself, go to the business hall with a wireless network card (can be 3G, 4G) and bring it over to keep the transmitter charged; In fact, there is a rental at the airport in Japan.,Rent there like 30 yuan a day.,I forgot how much.。。。 If you keep going abroad, it is recommended to buy a transmitter by yourself, which is more convenient and stable.

Yes, buy a Wi-Fi transmitter by yourself, go to the business hall with a wireless network card (3G, 4G) and bring it over to keep the transmitter charged; In fact, there is a sleepy bend in the Japanese airport to know how to rent.,Rent it there like 30 yuan a day.,I forgot how much.。。。 If you keep going abroad, it is recommended to buy a transmitter by yourself, which is more convenient and stable.

1. There is no mandatory requirement for you to check in your luggage, and you can also bring a carry-on bag. However, during the insurance period, it is best to negotiate with the airline or travel agency in advance, because the general baggage check-in is only allowed to be 20kg, and some flights require no more than 3 pieces of hand luggage. In short, the principle of Xinshu is to increase the checked baggage limit with travel agencies and airlines as much as possible.

When you go to Japan, you should have as few things as possible, leaving enough weight and space for you to return. 2. No special procedures are required 3, and the domestic mobile phone is required to go to Japan to access the Internet.

4. China's router can support 110V voltage with transformer, so it can be brought to Japan for use, and the situation of the hotel is more complicated, so it can only be communicated with the travel agency in advance. 5, Japan's rated voltage is 110V, only marked "110V" or "110 240V" words can be used 6, Youliang recommended to buy Japanese goods, mainly digital cameras, SLR cameras, watches, laptops, etc. 7, buy one or two goods back to China, generally do not need to be taxed. Unless there are special requirements from the customs, such as a period of time when the ipad is checked very strictly during the banquet.

There is also the same product for sale, do not buy 10 pieces, 8 pieces. Generally, the electronic products bought back are put in the checked baggage and brought back.

Dear, do you have any questions for Xiaodu?

Refer to it. Japanese buffalo wireless router.

Here's how to set it up:

1. Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.

2. Greeting refers to opening the browser of the computer, entering the IP of the router in the address bar, and clicking the enter key.

Go to the router's settings page and username.

is admin, the password is blank, click to log in, and enter the router's settings home page.

3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the username, enter the ISP in the user correctly (Netcom, Great Wall, Telecom, Tietong.

wired, etc.). The connection mode selection is always filled in with the mtu value of 1492. The save is done.

4. The wireless router also has a wireless encryption to ensure the security of the wireless household with the Zen calendar. On the main page of the router's settings, select Wireless Settings in Safe Mode.

, choose any of the encryption methods, WEP, WPA, WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings are completed after saving the settings.

5. After the setting is completed, the router will automatically restart and connect to the Internet.

The WAN is wired to the router.