How to install a WLAN router tutorial

How to set up a wireless router.

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

3.Once you've logged in to your backend, select Quick Settings and click Next4Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the account and password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

This will automatically boot the router. 2.Then, use a network cable to connect one end to the LAN port of the optical modem, and the other end to the WAN port of the router.

3.If the router is the latest wireless router, you can connect to the Internet directly. If it is some of the common routers that we commonly see, you need to set it up before you can surf the Internet.

If you have extra network cables, you can connect one end to the LAN port of the router and the other end to the network cable interface of the computer. 4.Once connected, open the browser on your computer.

Enter the IP address of your router in the input field at the top of your browser. By default, most IP addresses are followed by pressing the keyboard confirmation key. 5.

Next, enter your router's login password in the login panel that appears. If you don't know the login password, you can check it on the back of the router. After entering, click Confirm below to log in.

6.After logging in, click on the setup wizard on the left, and an interface will pop up on the right. Click Next.

7.On the Select Router Internet Access Mode page, select Automatic Router Acquisition, and then click Next. 8.

Next, the router will automatically get the Internet access. Wait patiently for 10 to 20 seconds. On the wireless settings screen, select the wireless encryption method, and then enter the wireless password.

When you're done losing, go ahead and click Next. 9.On the page that appears, click Done at the bottom right.

Wireless routers need to be set up according to the Internet environment before they can be used. Different Internet environments have different ways to set up wireless routers. If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router; 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page; 3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet account and password, and set up automatic connection; 4. Set the SSID, encryption method and password; 5. Save and restart; 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

In the age of smart devices, wireless networks are used everywhere.

Some friends will install a WLAN router for themselves if they have a network at home, which can be connected wirelessly. So do you know how to install a WLAN router? Here are some relevant information about WLAN router installation that I have compiled for your reference.

How to install a WLAN router:

There will be an installation manual for new routers! The IP address entered will be indicated on the manual. For example, my wireless router.

You need to enter it, and some of these inputs are different.

Then connect to the wireless router and enter the IP address on the manual in the browser. Press Enter.

However, there are many children's shoes that may not be opened after entering. I've come across it myself.

The way to do this is to connect to the wireless router network with your mobile phone and open this IP address with your mobile browser. Found usable (for personal use, not necessarily for everyone)!!

Enter the IP address and open it up and there will be a login prompt. The default account and password are admin, enter and log in!

After logging in successfully, click Settings in the left navigation!

<> then it's time to enter your broadband account and password. After entering, click on the next Qiliang to light one step!

Then enter the two important, most important passwords. SSID is the account name of WiFi! WPA is the password for wireless networking!

The wifi router installation tutorial method is as follows:Tools Raw materials: Lenovog700, Windows 10, browser.

1. Take a network cable, insert one end of the network cable into the yellow interface of the optical modem, and insert the other end of the network cable into the blue interface of the router.

2. After plugging in, enter the corresponding management interface according to the management address on the back of the router, and set your administrator password first.

3. After setting, click on the dark temperature step by step to set the name and password of your wireless network, and click OK after all the settings are set, so that the router is installed.

Router can be said to be an indispensable device in every family, with the increasing demand for home Internet access, generally speaking, the old router has been overwhelmed, there are often some jams, dropped the phenomenon, so it is necessary to upgrade it. Let's introduce to you how to install a wifi router.

1. First plug the network cable into the computer and the router respectively, and connect the computer and the router together; 2. Open the webpage and enter the IP address to enter the settings webpage; 3. Most telecom access methods are PPPoE, enter the account number and password for Internet access, and there will be a security prompt at this time, just enter the password of wifi.

How to choose a router.

1. Router CPU and memory.

The router is generally composed of CPU chips and memory, if the CPU runs faster, then its memory will be larger, the natural network speed is faster, and it is not easy to crash.

2. Wireless protocol standards.

Secondly, the router has a supported wireless protocol, which can be said to determine the speed of the network, and it will also carry out a continuous upgrade of the equipment at home, so it is still very important to choose a router with a high rate, at present, like and these two are currently more widely used, its transmission rate can reach 600mbps, the latter can reach the highest. If you are using Gigabit WiFi at home, you can choose the protocol.

3. The more antennas, the better the signal.

In the end, most people will choose more antennas when choosing a router, and they feel that the more antennas, the wider the signal coverage. In fact, in fact, there is no difference between 4 and 2 days, the power of the antenna is small, and its antennas are many, which will interfere, which will also cause a bad signal.

Summary:About how to install the wifi router related content is introduced here,You can follow the above steps when installing,Some details in the installation process should also be paid special attention。 If you want to know more about related information, please pay attention to Qeeka Home.