-
Anonymous users2024-02-05Prepare two network cables (the first one you have ready, which is the one that goes through the "modem").
The second is to buy a network cable sent by the router, if you don't send it, you have to make a network cable with crystal heads at both ends. ）
1.Change the local connection to automatically obtain the IP address.
2.The network cable from the "modem" (modem) is connected to the "wan" port on the router, and the router's ports 1, 2, 3, and 4 are connected to the network cable port behind the computer host.
3.Open the browser and enter the password and username of the router are admin
4.Go to the router settings screen, select the PPPoE (ADSL virtual dialing) method, enter your home account and password, and confirm.
5.Then set the SSID, encryption method, and password. Save, restart.
6.In the end, the setup is considered successful.
-
Anonymous users2024-02-04First connect the network cable to the modou cat, and then connect a wiring to the cat, one end to the router, and then a wiring, connect the router and the other end to the host of the computer, and the cat and the router must be connected to the power supply.
-
Anonymous users2024-02-03After the power is turned on, connect the wireless router to the computer, open the browser and enter in the address bar: to enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access method, and restart the wireless router after the setup is completed.
Next, go to the wireless settings and set the SSID name
-
Anonymous users2024-02-02Route settingsYou can set them up by following the steps below!
1. Connect the home network cable to the WAN port of the router.
2. Use another network cable to connect to your computer at one end, and connect to your routing LAN port at the other end, (LAN port is the interface marked on the route!) ）
3. Turn on the computer, open the browser, and enter the route login IP in the address bar.
4. Enter the route login and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login and password, you can turn the route over and take a look, and write it on the back of the route!
5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.
PPPoe, enter the Internet and password!
6. After the settings are completed, save the exit and restart the route!
Once the routing restart is complete, your routing hardware connection and setup are complete!
In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!
-
Anonymous users2024-02-01Your router doesn't support it, but if it's 100m fiber broadband, ordinary routers use wireless testing, and there are also about 40m.
Note: This router is a 300m 100 Gigabit router.
It is recommended that you use the 360 5 and try it, with a dual frequency of 2100m.
If it's 4m, it's okay.
I don't know what you mean by the network cable is the landlord's? It's really hard for you. >>>More
The LAN port of the cat pulls a network cable to the WAN port of the wireless router, the specific method: >>>More
There are two situations, first: your computer is poisoned by ARP, as soon as you start the Internet virus, trick other computers into sending data packets to your machine, and your computer throws away these packets, their computer will not be able to get on, use 360 to kill the virus. >>>More
It's basically fine. It's okay to close the doors and windows, wireless routers are different from mobile phones, and the technology they use to transmit data is different.
First, network interconnection, routers support a variety of LAN and WAN interfaces, mainly used to interconnect LAN and WAN, to achieve different networks to communicate with each other; >>>More