How to build a wireless network with a computer? How to create a wireless network on your computer

It depends on the Shenma system.

Do it if it's XP.

Open the Online Neighbor property.

1) Local connection (wired) attribute Advanced Internet connection sharing (check allow sharing) OK (some versions of the system may force to modify your IP at this time, it's okay, just change it back after sharing is successful) After success, a hand appears under the local connection icon.

2) Wireless connection attributes: Set IP to the subnet mask, and the rest is empty (friends who are familiar with IP can set others, but maybe the IP and gateway on the client need to be manually specified) OK.

3) In the lower right corner of the screen, right-click on the wireless network icon to view available wireless connections Change the order of the preferred network Under the wireless network configuration tab, click Advanced Select Computer Only to Computer Close Add (the network name and password are set, and the key can be automatically provided to me to set the password by yourself) OK, OK, OK.

Tips, sometimes so others can't find the wireless we have established, at this time, as long as we open the available wireless connection on our computer, you can see the hotspot we just established, double-click, connect, there will be a state of connection, at this time others can see our wireless, they connect, we will also show the connection.

Open the tethering center and there is a wireless network to manage. Then click Add (Win7 system).

If you can't see a list of wireless networks in the place where you are connected, it may be that your wireless network is banned. You go to the Network and Sharing Center - Change the adapter Enable Wi-Fi... That's it. Hope it solves your problem.

Wireless is required to install a wireless network card, can not be created, you install a wireless network card, and then drive well, you can use the wireless network card to connect to wifi Internet access, now conveniently, the wireless network card can be driver-free, plugged in and available.

Method 1: 1. First of all, you need to open "My Computer", find "Control Panel", and select "Network and IntetNet" to enter;

2. Open the "Network and IntetNet" page, and select "View Network Status and Tasks" under the "Network and Sharing Center" category.

3. Select "Manage Wireless Network", click "Add" in the upper left corner, and fill in the WiFi network step by step according to the prompts;

4. Turn on the wifi function of the mobile phone, find the corresponding wifi, and enter the Jiantong password to use it.

2. Enter the hotspot password on the left side, and then click "Start";

3. Turn on the wifi function of the mobile phone, how to find the corresponding wifi, enter the password to use.

The computer can also be connected to the hotspot of the mobile phone by opening the "Settings" of the mobile phone; Go to "Personal Hotspot"; Set the name and password of the personal hotspot, and turn on the hotspot after setting. Open the "Network Settings" in your computer and connect to the hotspot.

Start --- set --- network and Internet---Wi-Fi Reader Set to on--- display available networks, select the wifi you need to connect to the potato forest, output the password, and then connect.

Method 1:

Use WiFi sharing wizard, cheetah wifi, 360wifi and other sharing software to establish hotspots;

Method 2: 1. Run the command prompt as an administrator

The shortcut key win+r enters cmd and enters.

2. Enable and set the virtual wifi network card

Run the netsh wlan set hostednetwork mode=allow ssid=diligent key=password

This command has three arguments, as follows:

mode: Whether to enable the virtual Wi-Fi network card, change to disallow to disable.

SSID: The name of the wireless network, preferably in English (take Diligent as an example).

key: Wi-Fi password, with more than 8 characters (take password as an example).

The above three parameters can be used separately, for example, only mode=disallow can be used to disable the virtual WiFi network card directly.

After it is successfully enabled, there will be an extra wireless connection with the network card "Microsoft Virtual WiFi Miniport Adapter"2 in the network connection, which will be renamed for convenience"Virtual wifi"。

If not, just update the wireless network card driver and you're good to go.

3. Set up Internet connection sharing

In the Network Connections window, right-click on the network connection that is connected to the Internet, such as Local Connections, and select Properties

Share", tick "Allow others... Connect (n)" and select "Virtual WiFi".

Note: If an error message appears after clicking Share, you need to turn on the Windows Firewall service. Right-click Computer

Manage Services & Applications > Services, find the Windows Firewall service in the list and start it, OK!

Once confirmed, the word "Shared" will appear next to the NIC icon that provides sharing, indicating that the "Broadband Connection" has been shared to "Virtual WiFi."

4. Turn on the wireless network

Continue running in the command prompt: netsh wlan start hostednetwork

Change start to stop to turn off the wireless network, and then you only need to run this command again to enable the wireless network after booting up).

At this point, the red cross of the virtual wifi disappears, the wifi base station has been set up, and the host has been set up. Laptops, mobile phones with wifi module.

The specific method steps are as follows.

Turn on the commonly used 360, or 91 wireless.

Find the free wifi software and click on install.

After installation, click "One-click to open".

The password account is automatically created as shown in the figure below, and the password can also be hidden.

5.It is also possible to scan the connection with the phone***.

6.If you don't need it, you can also right-click in the taskbar to exit, which is very convenient.

You can do it with a web wizard.

Generally speaking, when one network is shared, the IP of the other network connection is automatically set. The IP of iTouch is set to OK, and the default gateway is the same at home and in the hotel.

A wireless device on the computer will do.

You can buy a wireless router and you're good to go.

$50 is a lot. There is an IP address in the hardware that automatically provides the management page in the export.

Of course, the entrance is a LAN cable that can access the Internet.

This way, your phone can use wifi freely.