-
If it's broadband, install a wireless router, and if it's a mobile phone network card, buy a small wireless router for a mobile phone card, which is convenient.
-
It's better to use your phone to share the wireless network.
-
The next wifi sharing wizard will do.
-
Take the W7 system as an example:
2. Copy the following to:
echo off
netsh wlan set hostednetwork mode=allow
netsh wl set ho ssid=wifi-win7
netsh wl set ho key=1234567890 persistent=keyusage
netsh wl st ho
The exit line is pressed enter. Then save --> run as administrator.
3Go to the Network & Sharing Center to see if there is an extra Wi-Fi connection x. Generally Wi-Fi 2
If anything. Then there is no problem with the operation of the previous step. If it doesn't appear, please check the previous step;
4. Determine which network connection to surf the Internet: Local ConnectionBroadband connection. Other Wi-Fi connections, etc. It depends on what kind of Internet access method is used
Local connection to connect to the Internet to the Internet: Originally, there was a router, and the computer network card interface was connected to the router with a network cable.
Wi-Fi network: There are two Wi-Fi cards on the computer.
Broadband connection: Use a computer to dial up the Internet.
5. Right-click on the identified network connection --> Properties --> Advanced -> Sharing. Then you're OK.
-
Take Lenovo thinkbook14, win10 system as an example, the method of sharing the network of the computer to another computer:
1. Turn on your computer first, and then tap the "Windows" icon in the lower left corner of the computer screen.
2. After that, find the "Settings" option in the pop-up window and click to enter.
3. After entering the Windows settings interface, click on the "Network & Internet" option in the interface.
4. After entering, click the "Mobile Hotspot" option on the left navigation bar, and then turn on the "Mobile Hotspot" function in the interface on the right, and set the name and password of the hotspot.
5. After the mobile hotspot is turned on, you can turn on the "wifi" connection function of another computer, and finally find the correct hotspot name and enter the password to connect.
The network shared in this way is based on the hotspot function of the main computer, and the rest of the devices can only be connected in the form of wifi, if there is a problem with the main network, then the network of the rest of the devices will not be available.
This answer applies to most models of Lenovo computers.
-
1.Boot into the system. Right-click the starting position and select the Settings option.
2.Select Network & Internet
3.Click [Mobile Hotspot], and click the option on the right to enable the mobile hotspot function.
4.After selecting the network connection you want to share, you can press [] to change the network name and password frequency band you want to share.
5.The name of the network to be shared Password Frequency BandThe name of the network to be shared Password Frequency band.
6.When you're done, you'll see the device that is connecting to the mobile hotspot on the features page.
-
This can be achieved, first put your laptop wireless network point attributes, select the shared network, so that the address of the wired network card should be set to the next or below), and then connect your wired network port with the WAN port of the wireless router (before this you need to route using a static IP address.
-
I don't understand you... Since you can rub other people's wireless network, it means that the other party has not set a password, how did you come up with such a strange problem as sharing the network of your laptop to the router? Why not use a wireless router to bridge each other's signals?
This way, you can use both your computer and your phone. Of course, it depends on the premise that your wireless router has WDS bridging function, and some routers are called bridge.
-
Method: 1. Bridge with a wireless router and a friend's wireless router. Both wireless routers need to have this function, and the wireless router can receive his signal. This is the best, both the computer and the mobile phone can receive the signal from the wireless router, and the computer and mobile phone can be used separately.
2. Use a wireless network card to receive signals, and use a wired network card to connect to the LAN port of the wireless router. To set up sharing for the wireless network card, the wireless router turns on the wireless function and automatically assigns the IP. At this time, the wireless router is actually a wireless switch, but his signal comes from the wireless network card, so the computer is turned off, and there is no signal.
-
Use the router's WDS feature, which is the wireless signal --- your wireless router --- your phone and laptop. At this time, the wireless router is equivalent to a relay, which can accept the originally weak wireless signal and amplify it before sending it out!
Check the connection mode to resolve the automatic network disconnection. >>>More
You're a genius, but as far as I know, it seems like there's no way. Hehe. >>>More
1, you need to buy a 150m wireless router, the brand of Mercury is not bad, buy a brand of network card and router, the compatibility will be a little better. >>>More
I also have this problem today I consulted my college classmates Haha Just click on the right mouse and select My Computer Hardware Click Device Manager After that, select Network Adapter and find the network card. Disable and enable "Shutdown and re-enable after disabling" on the pop-up right-click menu, please give points and good luck (o).
There are two cases:
The wireless bridge is connected to the WAN port of the wireless router under the wire >>>More