Lavender cuttings or sowing problems, good 100 bounty points

Lavender is fine with cuttings from young shoots, cuttings in the sand, always keeping the sand moist.

Put it in a cool place, and at the same time he will bear seeds, collect him in the fall, and sow them in March in the spring.

Soak for an evening before sowing.

The cutting time of lavender is generally in spring and autumn, and its cuttings are very adaptable, so as long as the temperature is suitable, the time requirement is not large. If the temperature is too high and the climate is humid, the cuttings are susceptible to disease and the bottom may rot. If the temperature is too low, the rooting speed is very slow, which is not conducive to its development.

In order to ensure the good growth of cuttings, it is generally necessary to find a lavender plant that is free of pests and diseases, and use its tender branches as cuttings, not to use already lignified. The length of the cuttings is between 5-10 cm, and after cutting, remove the leaves at the bottom and soak it in rooting water, which will promote the growth and development of new roots.

Pick a flower pot of the right size, usually with a clay pot, which is very breathable. Prepare potting soil with river sand and coir and mix together in a 2:1 ratio.

Poke a hole in the potting soil with chopsticks and insert cuttings into it to a depth of one-third of the length of the shoot. After insertion, put it in a well-ventilated and cool place, and keep the soil moist for the first three days.

After cuttings, we should pay attention to watering to ensure that the leaves on the branches do not shrink and dry up, but they are not resistant to watering too much, so as not to affect the growth of new roots. Since the roots are still relatively tender, there is no need to fertilize it, and when its roots have grown and start to grow new leaves, you can fertilize it again.

Lavender cuttings can generally take root in two weeks, during which the environment should be kept moist, but not too damp, otherwise it is easy to let the roots rot.

Because lavender is a cross-pollinated crop, its seedlings have great variability, and it is easy to degrade after long-term seed propagation, and it is not easy to maintain good seed quality. Through experiments, cold shed cuttings are a feasible method, and its advantages are simple propagation procedures, easy rooting and high survival rate.

Reasons for autumn harvesting.

1. After cuttings in autumn, the temperature is low and the soil moisture evaporation is small, which is conducive to the survival of cuttings seedlings.

2. Autumn mowing does not compete with other crops for water, fertilizer and labor, and the survival rate is high. Spring mowing often causes drought and reduces survival due to lack of water.

3. Autumn cuttings can be flowered and sown in the second year, which has good economic benefits.

Autumn cuttings seedling raising technology.

1. Cuttings.

It is advisable to take the upper lignified branches of the year. The length of cuttings is 8-12cm. It is best to cut the lower end of the cuttings into an inclined plane and leave 6-8 leaves on the upper part of the cuttings, which is conducive to maintaining nutrients and accelerating the healing and rooting of the cuttings.

2. Cutting time.

Preferably before the soil freezes. The Dalian area is like a spring in late November to early December.

3. Cutting method.

The small furrow is flat-cut, the furrow width is 1m, the plant row spacing is 5 8cm, the depth of the cuttings into the soil is one-third of the length of the cuttings, and the ground exposes 3 4 pairs of true leaves.

4. On-site management.

After cutting, the edge of the plastic film is covered, and the soil does not need to be pressed at the edge of the plastic film, so that the film can be removed regularly in the future, and the film is ventilated every 5 or 6 days. Water once after the cuttings in autumn so that the cuttings are tightly integrated with the soil. After that, it can be watered every 15-20 days.

In the spring of the following year, as the temperature rises and evaporation is high, drought-resistant irrigation management begins, which is a critical period for plants to heal and take root. Watering at the seedling stage, do not accumulate water in the cherry blossoms, and do not stick to the mud, otherwise it will suffocate and die. In early spring, the soil temperature is low and the ground temperature rises slowly.

It is necessary to loosen the soil, weed, and raise the ground temperature in time to facilitate the healing, rooting, and strengthening of the cuttings. Loosen the soil to avoid hurting the seedlings, from shallow to deep, and avoid loose cuttings, which will affect survival.

In April of the following year, the temperature rose and the seedlings grew faster. Moisture should be properly controlled to avoid overgrowth. After that, the seedlings are gradually refined and transplanted to the open field in mid-April.

Lavender. It is a common aromatic plant that is widely used in horticulture, fragrance, medicine, and food due to its beautiful appearance and unique aroma. The propagation methods of lavender are mainly divided into seed propagation and cuttings propagation, among which cuttings propagation has become one of the main methods of lavender propagation due to its simple operation, high survival rate and fast growth rate.

The timing of lavender cuttings propagation is very important, and it is usually carried out in spring and autumn. Choose a healthy lavender mother, cut its semi-lignified branches, keep 2-3 leaves, insert them into a moist medium, maintain a suitable temperature and humidity, and wait for rooting.

In the process of propagation of lavender cuttings, the following points need to be noted:

1.Choose a healthy female parent. The success of lavender cuttings propagation depends largely on the chosen female parent. A robust, pest-free lavender plant should be chosen as the parent to ensure the health of the cuttings.

2.Timing cuttings. Spring and autumn are the best times for lavender cuttings to propagate, when the temperature and humidity are high, which is conducive to the growth of cuttings.

3.Make sure the medium is moist. Lavender cuttings need to use a moist medium for propagation, and plain sand, perlite, peat soil, etc. can be used as a medium to keep it moist.

4.Control temperature and humidity. Suitable temperature and humidity are one of the key factors for the propagation of lavender cuttings. During the cutting process, it is necessary to keep the temperature between 20-25 degrees Celsius and the humidity above 80%.

5.Keep out of direct sunlight. Lavender cuttings need to be protected from direct sunlight during propagation, and it is best to do it in a semi-shaded environment.

6.Transplant in a timely manner. After the cuttings have taken root, they can be transplanted into pots in time, taking care not to damage the root system.

In short, lavender cuttings propagation needs to grasp the good timing, choose a good female parent, use a suitable medium, maintain a suitable temperature and humidity, and transplant in time to achieve a good reproductive effect.

Lavender cuttings can be carried out in spring and autumn every year, when cuttings, you need to select thick branches, then prune the bottom of the branches into a diagonal shape, and then insert them in fertile and loose, good air envy soil, and water mineral-rich water to the soil, waiting for the lavender plants to return to normal growth.

1. Cutting time

Lavender cuttings can be carried out in the period when the plant grows more vigorously, and lavender grows more vigorously in the spring and autumn of each year, so the cuttings of lavender can be carried out in spring or autumn, and the weather needs to be observed before cuttings, and it is best to take cuttings of lavender in sunny weather, so that the plant can grow better.

2. Cuttings in the soil

Cuttings of lavender also require the selection of the right soil. Lavender is suitable for growing in soil with rich organic matter content and good drainage, so cuttings lavender need to use yellow loam or humus soil with rich trace element content and good drainage, and the soil needs to be renovated before cuttings to improve soil porosity.

3. Cutting method

When cutting lavender, you need to select branches that grow healthy and have not suffered from pests and diseases, then prune the bottom of the branches into a diagonal mouth, soak them in potassium permanganate solution, wait for five minutes and then take them out, and then apply rooting powder to the bottom of the branches, insert the lavender branches directly into the soil, and use your fingers to properly press the soil on both sides of the plant to prevent the branches from toppling.

4. Later maintenance

In the later maintenance of lavender, you can water mineral-rich river water or natural water into the soil to soak all the soil, and you can also provide lavender with mixed fertilizer rich in nitrogen, phosphorus and potassium elements to improve the growth rate of plants, and can also provide lavender with all-day sunshine, so that the plants can photosynthesize normally.

<> lavender cuttings can be carried out in spring and autumn every year, when cuttings, you need to select thick branches, and then prune the bottom of the branches into an oblique land osmosis shape, and then insert them in fertile and loose, air permeability soil, and water mineral-rich water to the soil, waiting for the lavender plants to return to normal growth.

1. Cutting time

Lavender cuttings can be carried out in the period when the plant grows more vigorously, lavender grows more vigorously in the spring and autumn of each year, so the cuttings of lavender can be carried out in spring or autumn, and the weather needs to be observed before cuttings, and it is best to take cuttings of lavender in sunny weather, so that the plant can grow better.

2. Cuttings in the soil

Cuttings of lavender also require the selection of the right soil. Lavender is suitable for growing in soil with rich organic matter content and good drainage, so cuttings lavender need to use yellow loam or humus soil with rich trace element content and good drainage, and the soil needs to be renovated before cuttings to improve soil porosity.

3. Cutting method

When cutting lavender, you need to select branches that grow healthy and have not suffered from pests and diseases, then prune the bottom of the branches into an oblique mouth, soak them in potassium permanganate solution, wait for five minutes and then take them out, and then apply rooting powder to the early ridge at the bottom of the branches, insert the lavender branches directly into the soil, and use your fingers to properly press the soil on both sides of the plant to prevent the branches from toppling.

4. Later maintenance

In the later maintenance of lavender, you can water the soil with mineral-rich river water or natural water to soak all the soil, and can also provide lavender rich in nitrogen, phosphorus and potassium mixed fertilizer to improve the growth rate of plants, and can also provide lavender with all-day sunshine, so that the plants can carry out photosynthesis normally.

1. Cut branches. Cut a branch from the lavender plant, about 6-7 cm, from the top, just below the leaves, the knife must be very sharp. The point of the cut is a little below the place where the leaves grow, as you can see from the image below.

Don't use scissors, scissors don't cut well. If the original plant is not easy to distinguish between the top and bottom, you should also pay attention to the fact that it is not possible to plant when it is reversed.

2. Prune the leaves.

Use the same knife to remove the leaves, except for the top leaves! We need to leave some leaves for photosynthesis, but if there are too many leaves, the nutrients in the soil will be absorbed, so that the roots will not have enough nutrients.

3. Cultivation and rooting agent.

The roots of the branch 3 cm in the rooting digging resistance agent dipped in the soil after a bit, along the edge of the pot to plant a circle, the soil should be self-draining and breathable, it is best to use mixed soil, peat soil and perlite mixture, soil should be weakly alkaline. It should be noted here that terracotta pots are more breathable than plastic pots and can absorb water, allowing lavender branches to breathe better.

4. Rooting. After the above steps are done, gently water it and put it in the greenhouse, or sunroom, or windowsill. Then put a plastic bag on top of it, if you have a special incubator then you don't need it.

Mu unwrapping this bag can ensure that the lavender is warm and moist, which is a necessary step. Then let it root on its own, which will take about 6 weeks before it can be removed and strong enough to be transplanted outdoors.

5. Transplantation. When your little lavender grows to 8-10 cm, it can be transplanted into the outdoor weakly alkaline soil. If your soil is acidic, you can use some soil amendments, as lavender can no longer survive under acidic and overly moist soils.