How to set up the computer can be connected to the Internet, and the mobile phone cannot be wireless

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

Sometimes I don't know if my wifi is rubbed by others, how to set up wifi to not let the mobile phone go online. The following is for you to sort out how to set up wifi on the computer to not let the mobile phone access to the Internet, I hope it will help you!

Open 360 Security Guard, and in the lower right corner we can see the home network management function;

Click to install 360 home network management and open,The first login needs to enter the password,The password is the same as the password in our router settings interface,The default is admin,In this interface we can see all access to our wired network and wireless network。

equipment; Turn on the wireless device and we'll see the access network device.

If you see an unfamiliar device connected to our network, click Disconnect after the device details, and the device will be added to the blacklist.

can no longer access their own network;

You may also like:1Wireless routers.

Mobile phones can access the Internet, but computers can't solve it.

2.The computer is wired and the mobile phone is not wirelessly connected, and the solution 3What should I do if my computer sets up wifi but can't connect to the network4After the wireless router is set up, the computer can access the Internet, and the mobile phone cannot access the Internet, what should I do5How to set up wifi without a router on the computer

Set up MAC address filtering, no one can use the Internet without setting a password.

The wifi signal of the wireless router will always be connected by someone, even if the password is set, there is a brute-force cracking software can also be cracked, connect to your own wireless route, and seize the network. Here we need to use the wireless router's built-in setup tool to set up, only allow the specified computer to connect to the wireless router to prevent others from rubbing the network.

Method steps.

1. First log in to the wireless router management page, enter http in the browser: followed by the IP address of the router, (this address is not fixed, generally check your own default gateway is the address of the management page).

After entering, a dialog box will pop up for you to enter the user name and password, the settings of different router manufacturers in this place are different, you can refer to the instruction manual (the general user name is admin, the password is empty or admin).

2After entering the management page, there is a menu bar on the left, and you can find the Wireless MAC address filter option. Once clicked, the homepage will show you the wireless MAC filtering settings.

3 General MAC address filtering function is turned off by default, we click Enable Filtering to start it. There are options below, Forbidden. and allowed.

Generally, if we don't want others to rub the network and only allow a few people in the LAN to connect, then select Allow, and then add the allowed MAC address in the following entry.

Once set up, our wireless network can only be used by the people who set it up.

Don't set it up.,The home network cable is a **line.,It's not a **line connected to a cat when it's connected.,WAN from the cat out of the router (it's not the same color),And then out of the LAN line connected to the computer?,You unplug the wire connected to the computer and the router.,When you use it, connect it again.,At most, stand up and bend over.。。。

The easiest way is to unplug the network cable, and the other is to disable the network card. Professionally change the IP address and bind the MAC address.

First, set up from the router to filter the MAC in your own computer.

Second, from the computer, network properties, set the wrong IP and gateway.

The simplest is to set a computer boot password, and your child will not be able to play.

Disable Internet access on your computer.

Don't plug in the network cable.

Go to the network settings to disable local connections.

It's not clear how your network is formed. Generally, home wireless network sharing is a wireless LAN made of a "cat" and a wireless router. Judging from your screenshot, it's just that the computer is connected to the wireless router, but your wireless router can't access the Internet, so you can't access the Internet.

If it's your first time using a wireless router, don't follow the steps in the manual to set it up!

Here's a way for you:

1. If you follow the steps in the instruction manual to set up, please reset your router to factory settings;

2. Don't connect the router to the "cat" first, give priority to connecting the computer with the router (use a network cable to do, don't use wireless), after connecting, set the IP and DMS to automatic in the computer network card settings. If you know how to use the dos command, you can ping the IP of your router (generally, but it depends on the factory of your router, which is available at the bottom of the router.) If it is passed, you can proceed to the next step;

3. Enter the router settings from IE, select the PPOE method in the setup wizard, and enter your account and password to access the network. After setting it up, you can connect the router to the "cat";

4. If you used to use the "cat" directly on the computer to surf the Internet, you must clone the MAC address in the network settings in the router settings. Because if you don't, you won't be able to get online;

5. After the third step and the fourth step are done, you must restart the roader, there will be a prompt, just do it according to the prompt. After you finish it, you can use the computer with the network cable to see if you can go up and down the Internet, if you can, it means that the computer is a problem with the Internet;

6. Finally, enter the wireless settings to set up, which can be set according to the recommended way of the router, do not choose the others, here you can set the wireless service password, as long as your wireless device is connected to enter the password, you can access the Internet.

You can try the above methods, first take the computer and then try your mobile phone. Hope you succeed!

Is your router connected to the Internet, go to the routing interface to see.

If there is no problem with the settings, see which computer has installed 360, it may be a problem with 360, you can turn off the 360 security guard to see if it can be on, or find the startup item in the optimization acceleration of the 360 security guard--system key services, there is a "wireless LAN configuration service" that is forbidden to start, this is generally caused by your one-click optimization. Once the recovery is initiated, it's fine.

There are many computers that install 360 and will not only affect their inability to connect to wireless, but also affect other computers to connect to wireless [except for turning on the anti-wireless network function].