Kneel down and ask the master who understands mapgis software to solve his worries

1. Create a new folder (name) on the target disk to be saved, and set aside.

2. Open the CAD diagram you want to convert and save it as 2004DXF format.

3. Open, image processing - file conversion.

4. Input--Load dxf, pop up a window, select the layer you don't want to transfer out, if you need to convert them all, click OK.

5. Click the right mouse button in the graphical interface - reset the window, then a window will pop up, select all of them, and click OK.

You can see the graph.

6. File - save points and lines respectively (the area does not seem to be convertible), enter the name of the point and line items and select the save path (save to the folder created in the first step), after the above is completed, close the conversion interface window.

7. Finally, load the project you just converted in the drawing, and save the project file name (if you don't know this step, ask me again).

The current version does not support CAD area conversion, if you have to transfer it, you have to use the mapgisk9 version, if you can not convert the area, the 2nd floor is the correct solution. If you can not convert, there is a faster conversion method (batch conversion) with conversion: save all the CAD files that need to be converted to DXF format, if there are too many files, you can use the CAD converter tool to convert to DXF in batches, this tool is online and offline, there are a lot.

Then put the converted DXF files in the same directory folder. Open MapGIS --- Graphics Processing --- File Conversion --- Input (Menu Bar) - Batch Convert DXF, then select any DXF in the DXF folder and double-click, then wait a while to convert, the converted file name will automatically follow the DXF file name. Hope it helps.

1. Open mapgis, as shown in the following figure:

<>3. The new project is shown in the following figure:

4. After creating a new project, click the "Load Raster File" command under the "Vectorization" menu to load the raster file to be vectorized, as shown in the following figure:

5. Read the map, layer, build point, line, and area files, here to create a point file as an example, the line and area file creation method is similar, as shown in the following figure:

6. In the project management window on the left, right-click, select the "New Point" command in the pop-up shortcut menu, pop up the New Point File dialog box, and click the "Create" button after naming, as shown in the following figure

7. When vectorizing, before entering each type of element, it is necessary to enter the menu to modify the default parameters of such elements, so that it is undoubtedly a repetitive operation, and the image work efficiency, for this reason, the engineering legend containing fixed parameters can be generated, the system puts it in the legend board, and when the data is entered, the fixed parameter of a certain element in the legend board is directly picked, so that it can be entered flexibly.

8. Vectorization, the result is shown in the following figure:

<>10. In the "Project Management" window on the left, right-click, and in the pop-up dialog box, select "Save Project", as shown in the following figure

No! MAGGIS is a product of CGDI Group.

ArcMap is a desktop client in ArcGIS. It belongs to Esri, a global GIS software manufacturer, and is a leading brand in GIS software.

MAPGIS is the product name of China Digital Group, is China's geographic information system with completely independent intellectual property rights, and is the world's only built-up GIS data center integrated development platform, which realizes the complete integration of remote sensing processing and GIS, and supports the true three-dimensional integration of air, ground, surface and underground GIS development platform.

ArcMap is one of three user desktop components of ArcGIS Desktop. ArcGIS is a GIS system developed by the Environment System Research Institute (ESRI) in 1978. ArcGIS Desktop consists of three user desktop components, namely:

ArcMap, ArcCatalog, is an application that can be used for data entry, query, analysis, and other functions, with all the functions of map-based, such as map mapping, map, map analysis and other functions. ArcMap encompasses a complex professional mapping and system that is both an object-oriented tool and a data table generator.

1. Open mapgis, as shown in the following figure:

<>3. The new project is shown in the following figure:

4. After creating a new project, click the "Load Raster File" command under the "Vectorization" menu to load the raster file to be vectorized, as shown in the following figure:

5. Read the map, layer, build point, line, and area files, here to create a point file as an example, the line and area file creation method is similar, as shown in the following figure:

6. In the project management window on the left, right-click, select the "New Point" command in the pop-up shortcut menu, pop up the New Point File dialog box, and click the "Create" button after naming, as shown in the following figure

7. When vectorizing, before entering each type of element, it is necessary to enter the menu to modify the default parameters of such elements, so that it is undoubtedly a repetitive operation, and the image work efficiency, for this reason, the engineering legend containing fixed parameters can be generated, the system puts it in the legend board, and when the data is entered, the fixed parameter of a certain element in the legend board is directly picked, so that it can be entered flexibly.

8. Vectorization, the result is shown in the following figure:

<>10. In the "Project Management" window on the left, right-click, and in the pop-up dialog box, select "Save Project", as shown in the following figure