How to install an air energy water heater to be more energy saving? Please advise

It is understood that the matching of the main engine and the water tank is very important. Let's take the home machine as an example: using a large host with a small water tank will make the investment cost too large and increase the one-time investment cost, but because the working time of the host is shortened, the service life of the host will be greatly improved; Using a small host with a large water tank, this configuration can reduce the cost, but the working time of the host will be significantly longer, which will affect the service life of the host.

For example, there is a big difference between using a 1 hp main engine with a 300L water tank and using a 2 hp main engine with a 300L water tank. In this way, the small host will work for a much longer time, especially in winter. In this way, it is necessary to add electric assistance, and in winter it is necessary to rely on the electric auxiliary effect, so many users obviously feel that the electricity bill is similar to that of electric water heaters in winter.

Therefore, although the one-time cost can be reduced by adding power to the water tank, the cost of use will increase exponentially, and the gains outweigh the losses, which not only loses the energy-saving effect, but also greatly reduces the safety. In fact, the household air energy water heater can be assisted without electricity under the condition of reasonable matching. For example, 1 HP unit is equipped with a 100-150L water tank, and 2 HP units are equipped with a 200-500L water tank, which not only prolongs the service life of the main engine but also truly achieves the energy-saving, environmental protection and safe use performance of the air energy water heater group.

All in all, the energy-saving effect of the air energy water heater is undoubted, but due to the factors of unit matching, installation and insulation, the hot water of the air energy water heater will not achieve the expected energy-saving effect. As long as the configuration and insulation can be more reasonable, the energy-saving effect of the air energy water heater can be fully exerted, so as to maximize its energy saving.

A reasonable tank host match is important.

Matching of engineering machines. For example, in order to win the project, some engineers give a configuration of 5 horses with 6 tons of water, and some are 6 with 6 tons. One month after the installation of the project, the cost was about 2,000 yuan, but it was different in winter, and the cost became more than 6,000 yuan.

Therefore, it is not possible to match a small main engine with a large tonnage, and if it is 6 tons of water, it must be equipped with a main engine of at least 10 horses. In this way, the daily water consumption can also be well saved.

The host of the air energy water heater should be installed in the place of air circulation as much as possible, so as to use the heat in the air as much as possible, the water tank should be installed indoors as much as possible, and the waterway system should be insulated to save more energy.

If you want to make air energy water heaters more energy-efficient, there are still many tips, I hope my hands-on practice can help you.

Install an air energy water heater as close to the water end as possible.

The hot water pipe should be insulated.

With the use of peak and valley electricity, the air energy water heater is set to "economy mode", and the temperature is the most suitable only when heating and bathing during the valley power period.

Buy your own air energy water heater.

When purchasing an air energy water heater, it is also important to note that the size of the water tank matches the power rate of the main engine.

Installed in a sunny and warm place, an enclosed balcony is preferred.

Benefits of this one:Air energy water heater uses 220 240V general power supply, 850W 1250W or so power, at room temperature, it can produce 160 200L of hot water every two hours, which can be used by 2 4 people Zi Jingfeng, and the daily power consumption is about 2 3 degrees (when the ambient temperature is low in cold weather, the power consumption will be slightly higher), and the daily consumption is about 1 2 yuan, so the average monthly electricity bill for 2 4 people is only 30 40 yuan. The general gas cost is about 150 yuan, and the 200L electric water heater is calculated at 2000W, which consumes 15 kilowatt-hours of electricity per day for heat preservation and heating, about yuan, and the monthly cost is more than 200 yuan (the electricity consumption will be higher in cold weather).

Compared with electric water heaters, air energy water heaters can save about 70 80% of the monthly cost.

Upstairs is basically correct. However, staggered peak electricity consumption is only a "money-saving" rather than an "energy-saving" rebate.

Others are fine, 5 of them means to choose the right size, don't have fewer people but with a large device, so that the energy consumption is naturally higher.

Generally, the air energy comes with its own water tank, and it is important to pay attention to the warmth of the water tank (if the insulation layer is cotton, be careful not to get wet).

In addition, the 7th point, Xiangyang is not necessary, the key is to have a high air temperature, there is circulation, and the closed balcony will become a refrigerator when the air can continue to work.

If air energy can be used together with refrigeration function, the energy utilization rate is higher, but unfortunately the basic macro grip of ordinary household does not have this function, and the air energy of large-scale commercial use can often be used in multiple ways, and the efficiency is higher.

First, choose the equipment is enough.

When buying an air energy water heater, don't buy too big or too small a horse, just buy enough for your own home. If you are not sure how big an air energy water heater you should use in your home, it is recommended to consult the salesperson.

After the purchase of some air energy water heaters, you need to purchase a separate water tank, and the water tank should also choose the specifications that match the number of water heaters to prevent small horses and carts, or energy waste.

Second, the installation place should be selected correctly.

The heat of the air energy water heater comes from the air, so it is recommended to install it in a place with good air circulation and high temperature - the first choice for slag grinding is the balcony. If there is no place for the balcony, it is recommended to install it in the kitchen or bathroom, where the amount of domestic hot water is relatively large, and when using hot water in winter, it can reduce the heat loss of hot water in the transportation process; On the contrary, if it is installed too far, it is easy to cause the water temperature to drop due to the long distance of the pipeline.

3. Use with Gufeng electricity.

Nowadays, many people have turned on valley peak electricity at home, so it is recommended to heat the valley electricity as much as possible, which can effectively reduce electricity bills.

Fourth, the material of the insulated water tank.

The water tank with better materials, such as the water tank of Nuentai, drops 1 degree in 24 hours, and the water is also hot when you go to take a bath every two days; But the water tank with a bad material may drop several degrees a day, and when you go to take a shower every two days, the water is already cold and needs to be reheated.

Fifth, try to choose big brands.

In addition to the above power-saving tips, the most important thing is to see the quality and technological content of the product whether the air energy water heater can save electricity. For example, large brands of air energy water heaters, high technology, heating efficiency is naturally relatively high, such as Neuentai air energy water heater, the heating efficiency can reach 400%, but small brands not to mention the thermal efficiency, even the product quality may not be guaranteed.

1. Select the installation location.

The volume of air energy water heater is large, and it is necessary to choose the right location before installation.

2. Host installation.

The installation of the main unit of the air energy water heater is similar to the installation of the air conditioner, which needs to be installed in a solid place and the display panel is not installed in the bathroom.

3. Installation of water storage tank.

The tank must be floor-mounted and capable of holding up to 500 kg.

4. Pipeline connection.

According to the design, install the pipes of the air energy water heater, and use soapy water to check the connections of each pipe and the cap mouth after installation to avoid leakage.

5. Test the machine after installation.

After installation, first check the system of each pipeline and circuit system, and then turn on the power supply to set the thermostat, and test the air energy water heater.