The sewing agent is too ugly and wants to be removed, how to remove it?

Housing prices are high nowadays, and it can take two generations to buy a house. When buying a house, I also inquired about many comparisons, and wanted to buy a house with high cost performance, good community environment and good house type. The house will face the problem of decoration after handing over, and it is also very laborious when decorating.

If the decoration is not designed before, and you find unsatisfactory things after the decoration, it will be particularly troublesome if you want to re-rectify it. <>

The beauty sewing agent is too ugly Nowadays, people pay more attention to the quality of life, and want to make the home more warm and atmospheric, and will give the floor tiles when decorating the house. The beauty joint is used to fill the gap of the floor tiles, and many families will choose to give the floor tile wall tile beauty joint. When choosing a sewing agent, you should also choose a big brand, so that the quality is more guaranteed.

And the color of the sewing agent should also match the floor tiles, otherwise it will be embarrassing. Many people do not choose the color of the beautiful sewing agent when decorating, resulting in the color being too ugly after the decoration, and it is particularly annoying to look at it every day. <>

If you want to remove it, you have to live in the house every day, and if you always see the ugly sewing agent, it will be a headache, so it is better to remove the sewing agent directly and re-sew it. In order to remove the grout from the inside of the tile, it is necessary to use a special tool to rework it. After curing, the sewing agent will become very hard, so use a heat gun to blow the sewing agent softer, and then use a special knife to dig it out completely.

What should I do? During construction, we must pay attention to details, clean up the gaps such as tiles, and pay attention not to hurt the glaze of tiles when using knives. If you are worried that you will not be able to clean up the sewing agent, you can also find a professional to do it.

Many decoration companies will undertake the project of cleaning the sewing agent, so that as long as you spend a little money, you can clean up the unsightly sewing agent. When choosing a sewing agent, you must choose a good color to avoid rectification in the later stage.

It should be removed with a heat gun, and it should also be cleaned with a shovel blade, so that it can be removed very well and the effect is very good.

We can use the hot air of a hair dryer to blow and soften the parts that are not good, and then use a shovel to remove them and then apply the glue normally, but I recommend finding a professional master to do it, so as not to hurt yourself.

I think you can use some lasers or something else to do it or have a good effect.

The cleaning method is: first use a heat gun to blow the caulking agent soft, and then use a special utility knife to dig out the caulking agent in the tile. It should be noted that the surface of the tile must not be scratched during operation, otherwise it will greatly affect the aesthetics of the interior.

1. First of all, prepare a bottle of real rubber remover and spray it evenly on the stains after the sewing agent is cured.

2. When spraying, the adhesive remover should cover the entire stain surface.

3. Then apply evenly with your hands and let it stand for about 20 minutes.

4. Next, use a rag to wipe the plate, and wipe it vigorously several times when wiping.

5. At this time, you can find that the stains of the sewing agent are gradually wiped off.

Dry a cotton ball to dry. If the joint product itself is not cured, then the colloid in the tile gap needs to be removed and the glue should be re-repaired to make the seam. In addition, if the construction environment is humid or the indoor temperature is too low, it will affect the curing of the sewing agent, thereby increasing the time required for curing, so you need to be patient.

At the same time, after inserting caulk into the gaps of the tile, do not rush to apply the caulk, but need to clean the outer surface again, and then carry out the construction of the caulk. At the same time, in order to ensure that the construction is carried out normally, dry cotton balls can be used to clean the gaps again to prevent water vapor from being left.

1.If you accidentally drip on the tile during construction, or if you don't clean it, you can use a degummy to clean it off. Spray the adhesive decompose on the cured sewing agent and gently wipe it off.

2.A large amount of beauty joint residue remains on the tile, if it is a smooth surface, it can be directly shoveled off with a glue spatula. If it is a rough surface, you can use a heat gun to blow the beauty sewing agent soft, and then wipe it clean.

There are several reasons why the sewing agent does not dry after construction:

1. The air humidity is high, and the water absorption of the sewing agent affects the curing of the material itself.

2. Before the construction of the beautiful seam, the inside of the gap is not dry enough, and the principle is the same as above.

3. The product material itself is a problem, and the raw materials used are of inferior quality.

4. The product processing technology is wrong, and the ratio of curing agent and pigment is wrong.

Now that we've found the cause, we're good to solve. We can prevent it directly at the source.

First of all, we have to choose a good brand product, big brands will generally be of high quality, have their own manufacturers, and have their own quality inspection system. At the same time, for the sake of their own brand image, they will also be more strict about the control of materials.

Secondly, we need to ensure that the construction environment is dry and clean. Try to avoid construction on rainy days, if you have to work on rainy days because of the construction period, it is best to pay attention to sealing the windows during construction, and you can use a hot fan or air conditioner when necessary. Wait for the caulk to dry thoroughly and clean the gaps before construction, this is for those who have been caulked.

Before applying the sewing agent, you can use a dry cotton ball to clean the gap again to avoid residual moisture.

Remove with a special cleaning agent, if you do not buy a cleaning agent at home, then you can choose a certain concentration of alcohol and oxalic acid, moisten the sewing agent with hot water first, and then wipe it off. If it is a water-based beauty sewing agent, then it can be wiped off directly with clean water.

You can wipe it with water or some dissolving agent to clean the grout remaining on the tile, or with the help of some beauty sewing tools, it can be removed.

You can use a knife to slowly pull out the sewing agent inside, and if you can't cut it out, you can use a little white vinegar to slowly corrode, and then you can dig out the sewing agent.

In such a situation, I think you can directly buy some professional cleaners to remove the sewing agent, or you can use a blade to scrape off these sewing agents.

The way to remove the unsightly sewing agent is to use professional sewing tools and ask a professional to clean it.

1. With the help of professional sewing tools

After curing, the sewing agent will become very hard, at this time, you need to use a heat gun to blow the sewing agent softer, and then use the sewing special training such as using a knife to dig out the sewing agent completely. Note: Ensure the cleanliness of the gaps during construction, and do not scratch the glaze of the tile.

2. Ask a professional to clean up

If you are worried that you will not be able to remove the sewing agent cleanly and completely, it is recommended that you find a professional home improvement company, they will find a professional to help you clean up, so that you can save yourself the trouble of doing it yourself.

Matching skills for the color of the sewing agent

1. Pale tiles are matched with the same color

If the tiles at home are light white, or lighter colors, try to choose the same color as the tile. This will make the floor look more harmonious and there will be no major mistakes. The same color distribution is suitable for the modern style of home decoration environment, relatively simple, giving people a plain and fresh feeling.

2. Bright color tiles are matched with near color

Bright tiles can be matched with similar colors, if the home tiles are the color of rhubarb and green, then the beauty joint can choose a similar color to the tile. Bright colors will give people a dazzling feeling, if you choose the same color, you will not be able to see the dividing line at all, and the visual feeling is poor. You can't choose a sewing agent with the opposite color, it will look very abrupt and have a sense of dominance.

3. Dark tile inverse color matching

If the tiles at home are dark colors such as black or brown, it is a close color or the same color to match, otherwise the whole space will appear darker. Dark colors generally need light colors to distribute, and the floor is evenly divided with light color sewing agent, which is full of beauty.

4. Versatile color matching

If you are not sure what color you want for the floor at home, choose a versatile color to match. Generally, the three colors of gray, white, and silver are all suitable for any color on the ruler, so as not to appear more abrupt.

You can use a utility knife to clean it up, scrape it off with a utility knife first, and then gently wipe it off with a rag. You can also use a hair dryer to blow hot air for a period of time before cleaning to soften the sewing agent in the porcelain seam, and then carefully shovel it off with a shovel.

The grout remaining on the tile, regardless of whether it is localized or not, can be wiped with a special grout cleaner, but this is only suitable for grouts that treat the surface of the tile.

If you have not purchased a cleaning agent, you can also use a certain concentration of alcohol or oxalic acid to clean it, first moisten the sewing agent with hot water, and then wipe it with alcohol or oxalic acid.

If the tiles at home are light white, or lighter colors, try to choose the same color as the tile to look harmonious.

<>1. If it is a water-based sewing agent, it can be washed off with water before curing. 2. If it is a beauty joint agent remaining on the surface of the tile, you can wipe it with a special beauty joint cleaning agent. 3. You can find a certain concentration of alcohol or oxalic acid, first moisten the sewing agent with water, and then wipe it with alcohol or oxalic acid.

How to shovel off the sewing agent is as follows:1. If the type of sewing agent is different, the method of eradication will be different. Among them, the one-component beauty joint agent is water-based, and the adhesion is generally not strong, so it will be easier to shovel off, as long as the tile gap position is scraped continuously with a utility knife, it can generally be easily shoveled off.

2. The hardness of the two-component sewing agent will be higher, so it will be more difficult to clean up, if you want to clean it, you need to use a hair dryer with power in two kilowatt operation to continuously blow the position of the tile gap, until the sewing agent becomes soft, and then use a shovel or utility knife to remove the sewing agent.

3. If you want to clean the two-component sewing agent, then it is best to use a hair dryer with higher power, if the power is too low, it will be difficult to reach the temperature that softens the sewing agent, and if you use the hair dryer for a long time, the hair dryer may be damaged. In order to avoid hot air burns on your hands, it is recommended that you wear gloves.

If you want to remove it, you need to use a shovel to remove it strongly, if it is already dry, it must be more difficult to remove, and you need to give him the whole. Pick it out before you can use a mill.

If you want to remove the sewing agent, you can use a spatula to give it directly, and you can remove it strongly, because it is already dry, and the sewing agent may need to be removed strongly to be able to remove it completely.