Can dichlorethoxin be used for flushing fertilization Can dichlorfen be flushed with high phosphorus

OK. Systemic and conductive, which can be directly absorbed by plant roots and move quickly in the plant body; It can improve the efficacy in the soil, and the effect period is long, and there is still bactericidal activity within two weeks of application.

Evil mildew. It is the latest replacement product of oxazalin developed by agricultural plant protection experts, which is a systemic high-efficiency pesticide fungicide, soil disinfectant, and also a plant growth regulator.

The pharmacodynamic effect is unique, with high efficiency, low toxicity, pollution-free, belongs to the green environmental protection high-tech boutique, oxafen can effectively inhibit the normal growth of pathogenic fungal mycelium or directly kill the bacteria, and can promote plant growth; It also has the ability to promote the growth and development of crop roots, take root and strengthen seedlings, and improve the survival rate of crops. The permeability of oxazalin.

It is extremely high, and can move to the stem in two hours and the whole plant in 20 hours.

Oxazalin has systemic and conductive properties, can be directly absorbed by plant roots, and moves quickly in plants; It can improve the efficacy in the soil, and the effect period is long, and there is still bactericidal activity within two weeks of application. The mechanism of action is unique, efficient, slightly toxic, pollution-free, can effectively inhibit the normal growth of pathogenic fungal mycelium or directly kill pathogens, he can be used to irrigate roots, and fertilizer is applied to the soil.

In principle, yes, but the cost may be higher. The main thing to note is that most of the current fertilization is said to contain biological bacteria, and oxamine is a fungicide, so if you rush to fertilize with biological bacteria for at least seven days.

Summary. Care should also be taken to store fertilizers and pesticides separately to avoid contamination with each other. In addition, sufficient stirring should be carried out before flushing to make the fertilizer and pesticide fully mixed to achieve the best effect.

Hello, dioxamine can be applied together with high phosphorus flush fertilization.

Oxazoxin is a pesticide that can effectively control a variety of diseases, such as powdery mildew, scab, downy mildew, etc. High-phosphorus fertilizer is a fertilizer that contains high phosphorus, which has a good effect on promoting crop growth and increasing yield. The combination of the two can play a role in the prevention and control of diseases and the promotion of plant growth at the same time.

It should be noted that the fertilizer ratio should be adjusted according to the needs of the buried plants during flushing. If high-phosphorus fertilizers are used excessively, it may lead to acidification of the soil and excessive accumulation of phosphorus, which is not conducive to plant growth. At the same time, it should also be used in accordance with the instructions for use, and should not be used in excess to avoid adverse effects on the plant.

Attention should also be paid to the distribution of fertilizers and pesticides to avoid contamination with each other. In addition, sufficient stirring should be carried out before flushing the hole to make the fertilizer and pesticide fully mixed to achieve the best effect.

Summary. Hello dear<>

Oxazox can be applied together with high phosphorus fertilization. Oxazalin can enhance the immunity of crops and play a role in disease control. High-phosphorus fertilizer is one of the essential nutrients in the growth and development of crops, which can promote the growth of plant roots and improve yield and quality.

Can dioxazin be flushed with high phosphorus flush fertilization?

Hello dear<>

Oxazox can be applied together with high phosphorus fertilization. Oxazomin can enhance the immunity of crops and play a role in the prevention and control of diseases. The high-phosphorus slippery fertilizer is one of the necessary nutrients in the process of early growth and development of crops, which can promote the growth of plant roots and improve yield and quality.

Therefore, dioxazin and high-phosphorus fertilizers can be used together, but there are a few things to be aware of:1Do not mix chlormetyl and high-phosphorus fertilizers together and should be applied separately.

2.At the same time of applying oxazalin, it is necessary to apply an appropriate amount of high-phosphorus fertilizer tung dry material according to the needs of crops to avoid excessive use. 3.

In the process of using pesticides and fertilizers, it is necessary to pay attention to safe operation and protect yourself and the surrounding area.

In short, the dioxazine belt ruler and high-phosphorus fertilizer can be used together, but the stupid boy needs to comply with the use method and safety operation specifications At the same time, it is necessary to pay attention to the needs <>of the crop and the appropriate amount of application to achieve the best effect

<> how much high phosphorus is appropriate for fertilization of an acre of land.

Pro-<> fertilization of high-phosphorus potatoes on one acre of land needs to be determined according to the specific situation. Generally speaking, if the soil phosphorus content is less than 40mg kg, it can be applied in spring and autumn with a dosage of 30-45 kg of phosphate fertilizer. If the soil phosphorus content is between 40-100mg kg, phosphate fertilizer can be applied in spring at a rate of 20-30 kg per mu.

If the soil phosphorus content is higher than 100mg kg, it is not recommended to apply phosphate fertilizer to avoid waste and environmental pollution

Therefore, in the process of fertilization, it is necessary to consider the combination of crop varieties, growth period, soil nutrient status and other factors, and apply fertilizer reasonably to avoid overapplication

Drip irrigation amount. Pro-<>

For the amount of drip irrigation, it is also necessary to determine the return to Changchang according to the specific situation. Generally speaking, the amount of drip irrigation needs to consider factors such as the growth stage of the crop, the moisture status of the soil, and the climatic conditions of the land. In the process of drip irrigation, it is necessary to control the amount and frequency of water, avoid too much or too little irrigation, and ensure the water demand of crops.

In general, the amount of drip irrigation per session can be determined according to the growth condition of the crop and the moisture status of the soil, but it is generally not recommended to exceed 30 ml per hour.

Can it be used now.

Pro[Happy playing Yu Zheng], you need to judge according to the specific climatic conditions. If the local temperature is high and the soil is wet, fertilizer can be applied. However, if the temperature is too low or the soil moisture is too high, it is recommended to wait until the right time to apply fertilizer.

Summary. Oxazalin and potassium sulfate compounds are generally not recommended to be used at the same time. Oxamethazin is a fungicide used to prevent and improve plant diseases, while potassium sulfate compound fertilizer is a fertilizer that is used to provide the nutrients needed by plants.

There may be a reaction between these two chemicals, causing them to be less effective or even ineffective. In addition, the simultaneous use of multiple chemicals may also increase the damage to plants and cause pollution to the environment, so you should read the product label and instructions carefully before use, and follow the correct usage method and dosage. If you're unsure whether you can use both chemicals together, it's best to seek professional advice first.

Oxazalin and potassium sulfate compounds are generally not recommended to be used at the same time. Oxamethazin is a fungicide used to prevent and improve plant diseases, while potassium sulfate compound fertilizer is a fertilizer that is used to provide the nutrients needed by plants. There may be a reaction between the two species of chemicals, resulting in a weakened or even ineffective effect.

In addition, the simultaneous use of multiple chemical abrasive substances may also increase the damage to plants and cause pollution to the environment, so you should read the product label and instructions carefully before use, and follow the correct use method and dosage. If you're unsure whether you can use both chemicals together, it's best to seek professional advice first.

I want to plant beans, and I need to sprinkle some chemical fertilizer to disinfect the soil before planting. Soil disinfection with dimethazin and thiophanate-methyl, these two fungicides can be mixed with what kind of fertilizer to make the manuscript answered?

To disinfect the soil before planting beans, it is recommended to use a chemical synthetic fertilizer to fertilize the fertilizer first, and then use dioxazin and thiophanate-methyl to disinfect the soil. This is because the two fungicides and organic fertilizers are easy to have a chemical reaction, which affects the sterilization effect. If you have to mix it, it is recommended to choose inorganic fertilizers, such as nitrogen, phosphorus, potassium and other nutrients, and mix them with dimethyl and thiophanate.

However, there are still certain risks associated with the use of fertilizers and fungicides, so caution is recommended.

Oxazoxamine can be sprayed to the foliar surface, oxachlor is a highly effective pesticide fungicide, but also a plant growth regulator, and oxafen can inhibit the growth of pathogenic fungi, can also directly kill pathogenic fungi, so that plants grow healthily, and oxafen can also promote the growth of plant roots, improve the survival rate of crops.

1. Yes

Oxamine can be sprayed to the foliage, when breeding plants, if the plant is infected with a disease, you can spray it with Oxafarin, Oxamine will kill the pathogenic fungus on the plant infection, so that it grows healthily, and Oxazalin is low toxicity and pollution-free, it is a more green and environmentally friendly high-tech production of socks.

2. Promote growth

When cultivating plants, if you find that the plant is not growing well, you can spray it with oxamycofen, which has divine conductivity and can be directly absorbed by the roots of the plant, and it will be decomposed into glucoside by the plant enzymes in the plant, supplementing the nutrients needed for plant growth and promoting the growth of the root system.

3. Precautionary measures

During the seedling period of crops, tobacco, medicinal herbs and other plants, it can be sprayed 1000 times of oxafen, which needs to be sprayed once every 7-8 days, which can reduce the probability of plants being infected with root rot and other diseases, and will also make the root system of the plant more developed, and the root system of the plant will also increase the cold resistance of the plant.

4. Seed dressing method

Oxazoxin can be used when dressing seeds, it is necessary to mix oxazine with selected seeds, and then place the seeds in a bright place for drying, and the seeds after seed dressing can not be placed in a closed environment, so as to avoid its pesticide damage, and the mixture of oxazyl and other pesticides is more conducive to plant growth.

Pests and diseases are one of the types of pests that cannot be avoided when people grow plants, flowers and crops, and in order to solve this problem, people often spray pesticides on crops regularly. Oxazalin is one of them, so can it be sprayed foliarly? What should I pay attention to when using oxafen?

Let's take a look.

Foliar spray can also be carried out, for example, in the process of rice planting, because the seedbed has a certain amount of moisture, so spraying oxazine for rice is equivalent to spraying treatment, the effect is similar to sprinkling wetting and root irrigation, the difference is that it is used through foliar spraying, which can more effectively protect rice stalks. However, for dryland crops, it is not recommended to use chlormycolin by foliar spray, and the effect of root irrigation will be better.

Oxazalin is a new generation of new pesticide fungicide, but also systemic fungicide, moderate use can improve the physiological activity of crop base stove, promote root growth, but also improve the cold resistance of seedlings. Oxazalin can also be used as a foliar spray, but it should be noted that it must be reasonably diluted before spraying. Mix the mildew with the water as per 1:

The ratio of 1500 is diluted before use, which will be safer.

Oxazalin is a new type of pesticide fungicide, which is widely used in the process of plant planting. Oxazalin is often used as a way to spread and irrigate roots, which can prevent many soil-borne diseases, disinfect the soil, and sterilize.

<>1. Mixture of oxamine and potassium dihydrogen phosphate will not produce special chemical reactions. 2. When using the agent, dilute the agent with water 1500 times, and then irrigate the roots at the root of the plant. 3. The root irrigation method can be used in the early stage of plant disease, can effectively prevent and control root rot, and can be used for rice, wheat, cotton and other crops.

4. The agent is suitable for use in windless and sunny weather, and the dosage should be paid attention to.

1. Can dimethazin be mixed with potassium dihydrogen phosphate?

1. Whether oxazyl can be mixed with potassium dihydrogen phosphate.

1) Mixture of oxamyl and potassium dihydrogen phosphate.

2) Oxazomethoxin is a fungicide, the main ingredient is Oxazomethoxin, which is mainly used to prevent and control soil-borne diseases of crops, and potassium dihydrogen phosphate is a weakly acidic foliar fertilizer, which mainly supplements phosphorus and potassium to promote crop growth and increase yield and income. There is no special chemical reaction between the two and can be mixed.

2. Basic information of Oxamyl.

1) Oxazalin is a new generation of pesticide fungicide, systemic fungicide, soil disinfectant, and plant growth regulator, which is a green, environmentally friendly, low-toxicity and pollution-free product.

2) The agent is suitable for fruit trees, vegetables, wheat, cotton, rice, beans, melons, etc., and is a new type of anti-heavy stubble product.

3) Oxazalin can effectively inhibit the normal growth of pathogenic fungal mycelium, or directly kill pathogens, and can also promote plant growth, and can promote the growth and development of crop roots, root and strengthen seedlings, and improve the survival rate of crops.

Second, the use of Oxazalin root irrigation

1. How to use root irrigation.

1) Dilute the agent with water 1500 times and water it directly at the root of the plant.

2) The agent is suitable for root irrigation in the early stage of plant disease, can effectively prevent and control root rot, and is suitable for rice, wheat, cotton, seedlings, fruit trees, flowers, lawns and other crops.

3) The agent is suitable for windless and sunny weather, and the dosage should be strictly controlled.

4) The agent can be mixed with general pesticides, and the use effect is better.

2. Root irrigation time interval.

1) Generally, it can be used once in 5-7 days.

2) The agent has special effects on fungal diseases of various plants, and can also have strong soil sterilization and seed disinfection capabilities, inhibit various soil-borne diseases, and promote crop growth and root development.

3) The agent has systemic and conductive properties, can be directly absorbed by the roots of the plant into the plant body, and moves very quickly, it can move from the root system to the stem within 3 hours, and move to the whole plant body within 24 hours.

4) The agent can produce two glucosides in the metabolites of the plant, which can promote the growth of plants.