If two people have already paid compensation in a civil lawsuit, can the other two people file a civ

Do you already have two people with the other person, if they are the same person at the time, if they are using another thing, yes, if it's not the same thing, then it's okay, the same thing is not going to work.

If the four of them are together, with two compensations and two unpaid, of course, they can go to the court to file a civil lawsuit, and the court can enforce the failure to pay compensation within the specified time.

Yes, only if you didn't sue for this matter in the early stage, you can also sue for the same.

Among the co-rights holders, some of the rights holders have filed a lawsuit and obtained compensation, which does not affect the other rights holders to file a lawsuit and claim their rights.

It is difficult to say that the specific situation is not clear, and the key to this depends on whether it is a joint necessary lawsuit, joint and several liability, etc., which needs to be analyzed on a case-by-case basis.

A person who may initiate an attached civil lawsuit voluntarily waives the attached civil lawsuit, and may initiate a civil lawsuit after a criminal judgment is made.

Article 164 of the Supreme Court's Interpretation of the Civil Procedure Law: Where the victim or his legally-designated ** person or close relatives do not raise an attached civil lawsuit in the course of criminal proceedings, but separately raise a civil lawsuit, the people's court may conduct mediation or make a judgment based on the material damages.

If the person who needs to pay compensation has not fulfilled his liability for compensation, of course, he can file a public prosecution again until they return the money to you.

If it causes you a loss.

Compensation has not yet been paid.

There are also losses that have not been compensated.

You can sue in court.

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

There are already two people compensated in a civil lawsuit, and if the other two people can file a civil lawsuit, as long as your things happen together, you can get compensation through the lawsuit.

In the case of joint and several liability, you can apply to the court to enforce the debt against one of them, and if it goes well, the enforcement can be completed in six months.

Hello, after two people have compensated for the civil lawsuit, the other person can continue to file a civil lawsuit if he feels that he has something to do with other people.

Legal analysis: According to the law, if the civil judgment determines that the two defendants are jointly liable for compensation, then one of the defendants can bear the liability for compensation, and after the compensation is paid, it can be recovered from the other party in accordance with the law.

Legal basis: Article 108 of the Civil Procedure Law of the People's Republic of China The substantive elements of a lawsuit are: 1. The plaintiff is a citizen, legal person or other organization with a direct interest in the case, has a clear defendant, has specific litigation claims and facts, is within the scope of civil litigation accepted by the people's court and has jurisdiction over the people's court.

Legal Analysis]: Yes. China's Civil Procedure Law does not limit the number of plaintiffs or defendants in the same case.

As long as there are people who have an interest in the same subject matter of the lawsuit, they can participate in the same lawsuit. Therefore, a civil complaint can have two plaintiffs at the same time. If the number of plaintiffs or defendants increases to more than two, they are called co-plaintiffs or co-defendants.

If the number of plaintiffs or defendants increases to more than 10, a representative shall be elected from among the co-litigants to represent everyone in the proceedings. This elected representative is also a member of the parties.

Yes, the power of attorney entrusts the ** person to appear in court, and the plaintiff can not appear in court, if the two parties are the plaintiff or defendant in the same case, it is okay. If it is a different interest of opposing parties, it is not allowed.

For example, it is possible for two defendants to appoint a lawyer** at the same time. The parties have the right to entrust a person to submit an application for recusal, collect and collect records, provide evidence, conduct debate, request mediation, file an appeal, and apply for enforcement.

The parties may consult the relevant materials of the case, and may make copies of the relevant materials and legal documents of the case. The scope and methods for inspecting and reproducing materials related to this case are to be provided for by the Supreme People's Court.

The parties must exercise their litigation rights in accordance with the law, abide by the litigation order, and perform the judgments, rulings and mediation documents that take legal effect.

When entrusting the person to appear in court, he must submit a court appearance certificate and a power of attorney, and he must prepare a first word, and he should submit a reply and corresponding evidence materials before trial.

Legal basis]: Article 119 of the Civil Procedure Law of the People's Republic of China: The following conditions must be met for a lawsuit: (1) the plaintiff is a citizen, legal person or other organization with a direct interest in the case; (2) There is a clear defendant; (3) There are specific litigation claims, facts, and reasons; (4) It is within the scope of civil litigation accepted by the people's court and the jurisdiction of the people's court receiving the lawsuit.

Article 120:Prosecutions shall be submitted to the people's courts, and copies shall be submitted in accordance with the number of defendants.

Legal analysis: According to the law, if the civil judgment determines that the two defendants are jointly liable for compensation, then one of the defendants may bear all the liability for compensation, and after the compensation is paid, it can be recovered from the other party in accordance with the law.

Legal basis: Fractured burial.

Article 108 of the Civil Procedure Law of the People's Republic of China The substantive elements of a lawsuit are: 1. The plaintiff is a citizen, legal person or other organization that has a direct interest in this case, has a clear defendant, has specific litigation claims, facts and reasons, and is within the scope of the people's court's acceptance of civil litigation and the jurisdiction of the people's court receiving the lawsuit.

Legal analysis: A joint lawsuit refers to a lawsuit in which one or both parties are two or more people (including two people), and two people can be sued at the same time.

Legal basis: "Civil Procedure Law of the People's Republic of China" Article 52: Where one or both parties are two or more persons, and the subject matter of the litigation is common, or the subject matter of the litigation is of the same type, and the people's court recognizes that the stools can be tried together and with the consent of the parties, it is a joint litigation.

Where one of the parties to a joint litigation has common rights and obligations with respect to the subject matter of the litigation, the litigation conduct of one of them is recognized by the other joint litigants and becomes effective against the other joint litigants;

Where there is no joint rights and obligations with respect to the litigation jujube town mark, the litigation conduct of one of them is not effective against the other joint litigants.