IP6K What does the K of IP9K mean 10

Because the information of the owner of the vehicle is private, and the law does not allow private inquiries and disclosure to citizens, we cannot query the personal information of the vehicle owner through the Internet. However, you can try the following channels: 1. Those who need to inquire can apply to find the owner by going to the insurance company with valid documents and applying for construction according to the other party's license plate number.

However, the insurance company is in the protection of the owner's information, and the procedures required will be more cumbersome, and if it is an improper reason such as revenge and retaliation, it is estimated that the insurance company will not assist. 2. If the owner of the license plate violates your legitimate rights and interests, it is recommended that you call the police to 110 first, and then 110 will come forward to the vehicle management office to inquire about the owner's information. 3. Since the owner's information is private, there is no way to find it, unless an acquaintance goes to the local public security bureau traffic police team to check.

Although there is a self-service machine to check the violation in the place where the violation fine is paid, if the vehicle you check has a violation, then you will know who the owner of the car is. However, it will not be announced on the contact party of the owner, which will provide convenience for criminals to get the deck. Finally, remind you that knowing how to find the owner of the car with the license plate number is a legal way, but it is not a shortcut to help the abuse.

No matter what method you use to query the information of the car owner, it is hoped that it will be obtained through legal channels, because the information of each car owner is protected by the relevant departments.

The IP6K9K rating protects against the ingress of dust and high-temperature and high-pressure water, making products with this certification ideal for use in conditions where careful disinfection is required. In industries such as food processing, where hygiene and cleanliness are paramount, equipment must be able to withstand rigorous high-pressure, high-temperature washdown procedures. In many industries where dust and dirt may be present, it is important to ensure that dust does not infiltrate the product's housing and cause damage.

The IP6K9K rating is the highest degree of protection currently available. IP68 is the highest level of the connector waterproof rating standard. The meaning of the two numbers is that it is completely protected from the intrusion of foreign objects and dust, and the Table's stuffy electrical appliances are sunk indefinitely under the specified water pressure to ensure that they are not damaged by water immersion.

The IP protection level is composed of two numbers, the first number indicates the level of dust separation and prevention of foreign object intrusion, and the second number indicates the airtightness of the equipment against moisture and waterproof intrusion, and the larger the number, the higher the protection level. China's relevant test is based on GB 4208-2008 IEC 60529-2001 "Enclosure Protection Level (IP**)" car dry standard requirements, and the conformity evaluation judgment test is carried out on the enclosure protection level of various products; The highest detection class is IP68. Conventional product testing grades include:

IP23, IP44, IP54, IP55, IP65, IP66, IP67, IP68 ratings.

IP67: Immersion in water from 15 cm to 1 m depth for 30 minutes prevents water ingress.

IP69K: Capable of withstanding hot vapor washout tests as defined in EN 60529 and DIN 40050-9. This provides protection at a water pressure of 100 bar (1450 psi) and a temperature of 80 C.

The pressure is applied directly to the sensor in 30-degree increments (0, 30, 60 and 90 degrees) for 30 seconds at each angle for a total of 120 seconds (2 minutes) to prevent water from entering.

IP (International Protection Standard) is a term defined by DIN VDE 0470 and DIN 40 050.

These standards give a classification of the degree of protection of electrical equipment enclosures when the rated voltage does not exceed.

The details are as follows:

1. Personal protection.

2. Protection of electrical equipment to prevent the entry of solid substances, including dust.

3. Protection of electrical equipment to prevent damage caused by water to the equipment.

IP** explained.

An IP consists of the letter "IP" and two digits. The first digit is 0 6, and the second digit is 0 9 or 9k:

IP67: Immersion in water from 15 cm to 1 m depth for 30 minutes prevents water ingress.

IP68: Continuous immersion in water under the conditions specified by the ** business can prevent the ingress of water.

IP69K: Capable of withstanding hot vapor washout tests as defined in EN 60529 and DIN 40050-9. This provides protection at a water pressure of 100 bar (1450 psi) and a temperature of 80 C.

The pressure is applied directly to the sensor in 30-degree increments (0, 30, 60 and 90 degrees) for 30 seconds at each angle for a total of 120 seconds (2 minutes) to prevent water from entering.

These IP protection levels are often not properly understood or applied incorrectly. For example, many users believe that IP67 or IP68 protection allows the device to be put in the water for a specified period of time while working properly. This is not the case, and these levels of protection only guarantee that the equipment will still operate properly after it is removed from the water.

Another possible misconception is that meeting IP69K means automatically meeting IP67 and IP68. In fact, IP69K only protects against washout pressure and is not suitable for applications submerged in water. As a result, IP69K ratings are often used in applications where frequent washes are washed, such as in breweries, car washes, and food and beverage plants, but are not suitable for applications where equipment is completely submerged in water.

For details, see the international standard ISO 20653 which defines the degree of protection for road vehicles.

IP6K7K, IP6K9K.

The first 6K is the same as the 6 specified in the national standard, which means that it is absolutely dustproof;

The second digit, 7k, is not defined. Ordinary 4 is splash-proof, and 4k is anti-splash with pressure; Ordinary 6 is to prevent strong high-speed water flow, and 6k means to prevent strong high-speed water flow with pressure; 9K stands for high-pressure, steam jet cleaning (the highest national standard grade is 8, that is, IP68 is the highest).

6k Dust imprisons dust and cannot enter.

The entire diameter of the object must not exceed the void in the shell.

7K anti-short-time immersion at room temperature and pressure, when the shell is temporarily immersed in water at a depth of 1m, it will not cause harmful effects.