Why can t the fingerprint unlock the lock? Fingerprint lock not locked?

Why can't I unlock my iPhone with my fingerprint:

1. First open the "Settings" app on the home screen of Apple 6.

2. Find the "General" option in the settings list.

3. Then find the "Touch ID & Passcode" option in the general list and click to enter.

4. In the passcode setting interface, click on the "Touch ID" option.

5. In the Touch ID settings interface, please turn on the iPhone Unlock and App Store options, and then tap the "Add Fingerprint" option.

6. Next, the system prompts us to put our finger on the home button and start fingerprint recording.

7. When we put our finger on the home button, we will see that there is a record fingerprint displayed.

Animation. When setting up fingerprint recording, touch it once, then remove your finger. It is important to note that the fingers are kept clean and in a proper touch position.

8. After recording the fingerprint information of your finger, you need to set the posture of pressing the home button with your finger to unlock it. Everyone may touch the home button differently with their fingers, so use the way you're used to it.

9. Next, it is the same as recording fingerprints before, but you should pay attention to the direction and angle of finger touch as if you usually press the home button.

10. After the settings are completed, click the "Continue" button.

Will the fingers peel off.

Summary. The reason why the fingerprint lock is not locked: the reason why the password lock is not locked, after our technicians come to provide customers with password lock maintenance services, it can be roughly divided into the following points:

1. There is a mistake in the setting of the password lock system, which causes the password lock to be closed and the door cannot be locked. 2. The position of the door leaf of the anti-theft door is offset, resulting in the combination lock closing the door and not locking. 3. There is a quality problem with the combination lock, resulting in the combination lock not being able to lock the door or unable to unlock it.

Solution: 1. The door has fallen, and the deadbolt and the lock buckle are not in place, in this case, you only need to adjust the door. 2. The motor of the password lock is broken, and in this case, the motor needs to be replaced.

3. The password lock system is paralyzed, in this case, the password lock system needs to be restarted. 4. If it cannot be solved, contact the manufacturer's technical personnel or maintenance personnel for door-to-door maintenance.

Excuse me, but please go into more detail?

The reason why the fingerprint lock is not locked: the reason why the password lock is not locked, after our technicians come to provide customers with password lock maintenance services, it can be roughly divided into the following points: 1. There is a mistake in the setting of the password lock system, which leads to the combination lock not being able to lock the door.

2. The position of the door leaf of the anti-theft door is offset, resulting in the combination lock closing the door and not locking. 3. There is a quality problem with the password lock, resulting in the combination lock not being able to close the door or not being able to open the lock. Workaround:

1. The door has fallen, and the deadbolt and the lock buckle are not in place, in this case, you only need to adjust the door. 2. The motor of the password lock is broken, and the motor needs to be replaced. 3. The password lock system is paralyzed, in this case, the password lock system needs to be restarted.

4. If it cannot be solved, contact the manufacturer's technical personnel or maintenance personnel for door-to-door maintenance.

Hello, the pro-fingerprint lock can't open the original staggering cause may be 1If the battery is low or an inferior battery is used, it is good to replace it with a good quality battery. 2.

The long-term use of the fingerprint lock causes excessive wear and tear on the motherboard, resulting in battery leakage and inability to open the lock, at this time, if your fingerprint lock is still within the warranty period, it is recommended that you find a merchant to replace the motherboard, which will be replaced free of charge during the warranty period, and the normal fingerprint lock warranty failure period is about 2 years. 3.The motor can not operate, at this time we can test through the fingerprint password any way to open the door, as long as you can hear the "squeak" in the lock, it means that the motor is damaged without liquid, and if you can't hear it, it means that the motor is broken and needs to be replaced.

4.Damage to the motherboard will cause excessive battery drain, in which case it will not be possible to open it with a password, but it can be turned on with a fingerprint.

Call after-sales** or use the emergency key.

1. Call after-sales**. When a fingerprint lock fails to recognize a fingerprint multiple times in a row, the system locks it temporarily, but it usually doesn't lock permanently. You can call the after-sales service of the fingerprint lock brand** to ask how long the fingerprint lock system of the model you are using is locked, and you can use your fingerprint to unlock it again after five minutes.

2. Use an emergency key. If you are in a hurry, you can directly use the emergency key to unlock the lock, and then reset the system, and re-enter the fingerprint and password at the same time. 1) Open the back cover, there is a hole or the button is pressed for about ten seconds, and the factory settings can be restored.

2) Friend socks, enter the door opening password: press the "add" button, after the prompt sound, "enter the management password, to stop the bunch"; After entering the management password, enter the door opening password, press the number key to confirm; Re-enter the door opening code and press the number button to confirm. 3) Enter the fingerprint of the door opening:

Press the "Add" button, after the prompt tone, "Enter the management password, end with the sign"; After entering the management password, press the fingerprint, after the first entry is successful, it prompts "enter again", and press the fingerprint again to enter successfully.

Summary. 01.Because the problem of deadbolt locking, no matter what kind of lock it is, the lock of the automatic lock body, the lock of the electronic lock body or the lock of the mechanical lock body, if there is a problem of the deadbolt, it will indeed lead to the occurrence of this problem that the security door of the fingerprint password lock cannot be closed.

The main reasons are as follows: (1) the door crack is too large: this point is particularly easy to appear on the electric lock body, such as the push-pull lock; (2) The deadbolt of the lock body is damaged

This kind of problem is prone to appear on all lock bodies; (3) Insufficient elasticity and door matching: This kind of problem causes the deadbolt to be unable to extend into the lock box, which is generally caused by the door sagging. 02.

Structural problems of lock body For the structural problems of lock body design, it is particularly easy to appear on the self-popping lock body, if there is a problem between the door and the door frame, the self-pop can not be ejected smoothly, which will cause the door to be closed and cannot be opened. Another is that the deadbolt design is too short, which leads to too large a gap between the door and the door frame, and the deadbolt cannot be locked. 03.

Problems with electronic schemes are rare and generally rare. The failure of the electronic scheme is that the door is still in the normally open state when the fingerprint and password are entered, that is, the so-called door lock is not on, this phenomenon generally appears on the early smart door lock, which is rarely found at present. 04.

The problem of clutch no matter what state it is, if the clutch is in the normally open state, the door can always be opened, this phenomenon occurs more frequently on the mechanical lock body and the electronic lock body, and less frequently on the electric lock body.

Can you add, I don't quite understand it.

01.Because the problem of deadbolt locking, no matter what kind of lock it is, the lock of the automatic lock body, the lock of the electronic lock body or the lock of the mechanical lock body, if there is a problem of the deadbolt, it will indeed lead to the occurrence of this problem that the security door of the fingerprint password lock cannot be closed. The main reasons for this are as follows:

1) The door crack is too large: this point is particularly easy to appear on the electric lock body calendar, such as push and pull locks; (2) Damage to the lock body deadbolt: this kind of problem is easy to appear on all the lock limbs; (3) Insufficient elasticity and door matching:

This type of problem prevents the deadbolt from sticking out of the lockbox, which is usually caused by the door sagging. 02.Structural problems of the lock body for the structural problems of the design of the lock body, especially easy to appear on the self-popping lock body, if there is a problem between the door and the door frame, the self-bullet can not be closed and popped out, which will lead to the door can not be closed, and it can not be opened.

Another is that the deadbolt design is too short, which leads to too large a gap between the door and the door frame, and the deadbolt cannot be locked. 03.Problems with electronic schemes are rare and generally rare.

The failure of the electronic scheme is that the door is still in the normally open state when the fingerprint and password are entered, that is, the so-called door lock is not on, this phenomenon generally appears on the early smart door lock, which is rarely found at present. 04.The problem of clutch no matter what state it is, if the clutch is in the normally open state, the door can always be opened, this phenomenon occurs more frequently on the mechanical lock body and the electronic lock body, and less frequently on the electric lock body.

The fingerprint lock is closed and unlocked, and there may be several situations.

One is that the fingerprint lock does not use a self-popping lock body, so there is no such design - that is, after the door is closed, the door can be automatically ejected to lock the door.

One is that it may be broken.

Hit the power button and you're good to go.

Here's why:1There is no output of the power supply, that is to say, the electric lock has no power supply, it is recommended that you use a multimeter to measure whether the power supply of the lock is 12V, or to measure whether the output of the power supply has a voltage output.

2.The internal electronics of the electric lock are damaged, resulting in the electric lock not automatically locking.

3.Installation problems, caused by uneven two suction surfaces. The armature cannot be tightened too tightly, because it is impossible to adjust very parallel by manual adjustment, and once the two faces cannot be completely overlapped, the suction force will become smaller.

If it can be pulled apart, it is because the magnetic fit is uneven, and the point may be deformed. After repairing and leveling, it will return to its original super magnetic force.

4.Problems with the access controller. If you have tried to have this problem, the access control controller is powered off and then re-powered, and it can be opened normally, which proves that the controller has a quality problem.