How to reset the fingerprint lock and how to reset the password of the fingerprint lock?

To reset the fingerprint, you can delete and add the fingerprint through the administrator, but different series of products are different, and the specific operation is subject to the manual.

The following is the procedure for adding the fingerprint of a common user:

1) After entering "10", the digital tube displays: please press the administrator's fingerprint or enter the management password (if the password length is 12 digits, do not press the " button to end).

If the administrator's password or fingerprint is successfully matched, a long "tick--- sound will be heard, and the indicator light on the front panel will flash blue.

2) Press the button once and select Register as a regular user.

3) When the fingerprint window light flashes, press the finger you want to register.

4) Fingerprint registration needs to read the fingerprint twice, when the first reading is successful, please remove your finger when you hear a "tick" sound, and press the same finger again when you hear a "tick" sound again and the fingerprint window blue light flashes or lights up.

5) After the registration is completed, the blue light will continue to flash, at this time, you can repeat steps 3 and 6 to register another user's fingerprint, if you do not operate for a few seconds, the blue light will go out.

6) During the operation, when you hear the four short sounds of "Di, Di, Di, Di", it means that there is a mistake in the operation, please follow the above steps to re-operate.

7) Before registering the user's fingerprint, the administrator's fingerprint or password must be registered, otherwise the operation will be incorrect.

1. Factory initializationPress the touch button on the motherboard, and after hearing the prompt "Enter Initialization", start initialization, and there will be a prompt sound when the initialization is completed. 2. Enter the door opening password and press the "Add" button, after the prompt sound, "enter the management password, end with the number"; After entering the management password, enter the door opening password, press the number key to confirm; Re-enter the door opening code and press the number button to confirm. 3. Enter the fingerprint to open the door and press the "Add" button, after the prompt sound, "Enter the management password, end with the number"; After entering the management password, press the fingerprint, after the first successful entry, it will prompt "enter again", and press the fingerprint again to enter successfully.

Fingerprint Unlock is a screensaver unlock software that uses your fingerprint data and records for verification. The first time you use it, the app will sample your finger data. When the screensaver is on, you can easily unhook your phone by placing your finger in the scanning area and waiting for a short scan comparison to match. In addition to unlocking with your fingerprint, you can also set up to use gestures or a nine-square dot matrix to unlock.

Open the settings function in your phone, you can see the lock screen, password, and fingerprint options, tap to enter the options. Tap to enter the previous fingerprint option and then tap "Remove Fingerprint". Then tap on the option of "Add Fingerprint".

Place your finger on the fingerprint sensor. Because there are many fingerprint lines, you need to put your finger on the sensor several times before you can take a complete fingerprint. After the input is completed, you can use the fingerprint name.

The reset is complete.

Fingerprint locks have 2 types of fingerprints, and the first 1 or 1-3 fingerprints can be used to manage the common fingerprints later. If you want to reset the fingerprint, you can use the Manage Fingerprint to do it, and you can delete the normal fingerprint. It can also be initialized and restored to factory settings, and then re-entered the fingerprint.

After waking up the building surface, you can enter the system management of the operation building surface, and you can add or delete fingerprints.

You can do a factory reset and re-add your fingerprint.

The fingerprint lock is not the same, and the reset operation is not the same, it is recommended that you talk about the smart lock brand.

The password can be reset by initializing the password lockGenerally speaking, there are three ways to change the password of electronic password door locks.

One is initialization, press a certain key from the inside for a few seconds, and re-enter the password; Second, if it is the lock of the master control, it can be modified from the computer of the switchboard; The third is to use the mechanical key that matches the lock to initialize the password setting. Now let's take a closer look at the first way to change your password.

1. Press the power supply button at the bottom of the outer panel, press the '*' button three times, and the buzzer will make a long sound.

2. Enter the old password and press the ' button to confirm, the buzzer will make a long sound, and the LED light will flash.

3. Enter the 6 12-digit new password and press the ' button to confirm, and the buzzer will make a long sound.

4. Enter the same new password again and press the ' button to confirm.

Note: During the setting process, if there is an error in the input, the system will exit the setting procedure, and if the input is correct, the buzzer will make a long sound (or ** sound) to indicate success, and the LED light will go out.

Under normal circumstances, the initial password of the administrator of the smart door lock management system is 12345.

Management is to have the highest authority, generally after the smart lock is installed, add the administrator password, the initial password will be invalid. Only administrators have the permission to add ordinary Delete ordinary users, just like setting the date to have the permission to add ordinary Delete ordinary users, such as setting the date, Chinese and English interchange, scenario mode (always-on mode) fingerprint, proximity card, and password each have three groups of administrators.

After installing the fingerprint lock, the administrator should be set up in each group to prevent the password from being forgotten, and the administrator can verify with the fingerprint administrator. If you forget the administrator password of the smart lock, in addition to other ways to unlock the lock, you can also find a small round button on the side of the back panel.

The introduction of the smart door lock management system is as follows:

To do this, you need to keep the power on. After the factory reset, you need to repeat the above steps, reset the administrator password and add ordinary users, and the initial password fingerprint lock manual will be marked.

Here's how to add a new fingerprint to a fingerprint lock:

1. First of all, we open the fingerprint door slide cover, and then enter the password. Then press the OK button to enter the management mode.

2. After entering the management mode, we need to enter the administrator's password, and the administrator's password is the initial password, which is generally 123456After entering the initial password of the 123456, we can see that there are four options on the screen;

3. We select option 211 to set up users, after clicking to set users, we can see three options, one of which is - one to add a rolling banquet account, we press to add users;

4. Add a user interface.

After presenting it in front of us, we can see three more options, which are password, fingerprint and blank difference, and magnetic card. We choose Fingerprint Add;

5. We put our fingers on the area where the fingerprint is recorded, and slowly put the finger on it within 30 seconds to record the fingerprint, and finally it will prompt that the setting is successful, and the fingerprint will be added successfully.

Do the math how much it will cost you to renovate your home

In order to make life more convenient, most people have begun to choose to use fingerprint locks, but there are many cases of forgetting the fingerprint lock password, so they need to know how to change the new password. So how to reset the password of the fingerprint lock, and how to maintain the fingerprint lock, do you understand? Now let's take a look.

1. How to reset the password of the fingerprint lock.

1. Click and enter the "Manage Destruction Bureau Mode" of the fingerprint lock, press "1", and select "User Settings"; 2. In the "User Settings" interface, press "1" and select "Add User". 3. In the "Add User" interface, press "2" and select "Add Password". 4. Enter a new password and end it with " ".

Second, how to maintain the fingerprint lock.

1. When opening the door, it is necessary to pull the door handle, if you do not pay attention to it daily, it will lead to the reduction of the flexibility of the door handle, resulting in the inability to open and close the door normally. Therefore, it is necessary to develop a good habit and not hang the items purchased by the buyer on the doorknob, so as not to lead to a decrease in the flexibility of the doorknob and shorten the service life.

2. If you choose a fingerprint lock that is not a slide cover, then the collection window of the fingerprint lock is in direct contact with the air, that is to say, in daily use, it is inevitable that dust will accumulate on the surface, if you do not clean it up in time, it is very likely that the unlocking will not be sensitive, which will affect the speed of opening the door, so you should wipe the collection window with a soft cloth.

3. After using the fingerprint lock fiber to open the door, it is best not to get the bumper or main deadbolt of the fingerprint lock out, otherwise it is very likely that the door will not close normally, and it may even cause damage to the lock structure. In addition, when cleaning the fingerprint lock, do not use gasoline and alcohol to avoid the surface layer of the fingerprint lock being damaged.

About how to reset the password of the fingerprint lock, and how to maintain the fingerprint lock, it is introduced here, do you understand? Fingerprint locks provide convenience to our lives, but we should pay attention to daily maintenance work to make its service life longer.

Enter the area and get the decoration for free**].

There is an explanation in the manual, and different brands have different ways.

Method 1: Clear your password.

Step 1: Go to the inner panel of the fingerprint lock, open the battery cover, and then press and hold the "Setup Button" for about three seconds. After hearing the fingerprint lock make the sound of "ding dong ding ding", proceed to the next step.

Step 2: Enter the current management password (the initial management password is "1234" or "123456") after the key light is on, and then press the [*] button to confirm.

Step 3: Enter the two-digit ID number (01-30) of the password you want to delete and press the [*] button. If the fingerprint lock sounds "ding dong deng", the password has been deleted successfully. (Samsung fingerprint lock can't empty all passwords at once, you can only delete them one by one).

Method 2: Reset password: Restore factory settings.

Step 1: Press and hold the battery cover button above the inner panel of the fingerprint lock, and then press and hold the battery cover and slide it up to remove the battery cover. Find the setting button and press and hold for 5 seconds (indoors). Wait for the fingerprint lock to issue "dingdong dingding.""sounds.

Step 2: Enter the initialization number - 4560852580 on the keypad input interface on the outer panel of the fingerprint lock, and then press the [*] button, and the fingerprint lock will issue "ding dong deng.""If there is no such tone, it may be that you have made a mistake when entering the initialization number, just try again.

Method 1:

1. Press the power button at the bottom.

2. Enter the old password and confirm, buzzer.

Make a long sound, LED light.

Flashing. 3. Enter the new password of 6 12 digits and confirm, the buzzer will make a long sound.

4. Enter the same new password again and confirm it. During the setting process, if the input is incorrect, the system will exit the setting procedure; If the input is correct, the buzzer will emit a long sonar (or ** sound) and the LED light will turn off.

Method 2:

The initial password of the password lock is generally "123456", when changing the password, you must first select user management, then select the option to modify the door opening password, and then enter the new password that needs to be changed, and confirm it after entering. Finally, enter the new password again and press the "*" button to confirm.

1. Administrator password setting.

Steps:1Open the fingerprint lock battery cover.

2.Press the set button once to make a beep sound. 3.

Press the Start button (one digit after the number 3 on the keyboard) and enter the password (3-8 digits). 4.A tick sounded, and the operation was successful.

2. Door opening card, password, fingerprint lock, remote control setting.

Operation steps: 1. Open the battery cover. 2.

Press the set key once. 3.Press the start button of the fingerprint lock and enter the password (3-8 digits).

4.Press the start button and enter the number (00-99). 5.

Press the start button, enter the door opening (3-8 digits) to end, and the password is set successfully; Point your finger at the fingerprint window to read your fingerprint, and after the beep sounds, press and hold the same finger again to read your fingerprint. The sound is the same for both readings, which means a smart lock.

Fingerprint entry Chunheng was successful; Bring the card to be set close to the induction area and set the proximity card; Press any key of the remote control to set the remote position controller.

3. Delete the door card, password, fingerprint, and remote control.

1. Open the fingerprint lock battery cover. 2.Press the set key twice in a row.

3.Press the Start button, enter the manager password, and press the key. 4.

Press the start button, enter the fingerprint, password, remote control corresponding number, and number button to be deleted. For example, to delete the fingerprint, point your finger at the fingerprint window to read the fingerprint, close the card to the sensor area, and press any key on the remote control.

First of all, we open the slide of the smart fingerprint door lock upwards to activate the password input area.

Then enter the "Enter" key + "OK" key in the lower left corner to enter the administrator mode, basically the settings on the door lock are set in this administrator mode.

After entering the administrator mode, we will be prompted to enter the administrator password, where the initial password is 123456.

After entering the password we see four options, select the "2" option, set the user.

Once we enter the settings user interface, we can see three options, where we select the number "1" to add the user. After entering the add user interface, we see three options: add password, fingerprint, and magnetic card.

After entering the fingerprint (password), enter the fingerprint (password) for 30 seconds, enter the fingerprint (password), and finally it will prompt "Setup successful".