Why do I search for a document on a microdisk, but when I click on it, it says that the file has bee

It hasn't been deleted yet, and it will be given to the user for a certain period of time, and the user will delete it without transferring it within a limited period. Anyway, the microdisk is closed, for sure.

Some time ago, the country carried out an action, to detect violations on the Internet** and a**, clean network action, clean network action, even if the clean network action is over, it will not be opened immediately, it depends on these ** delete things that should not be open before they can be opened.

Could it be that this file is toxic. Blocked by antivirus software. Or maybe the path to the file is wrong. Remember the path.

Try: In many cases, once we delete a file or folder by mistake (here it refers to the permanent deletion on the disk), we usually use special tools to retrieve it, in fact, the following method may be simpler: 1. Click "Start" - Run", and then enter regedit (open the registry); 2. In the registry, hkey local machine software, microsoft windows, currentversion, explorer, desktop namespace; 3. Right-click "Namespace", select "New" - Item", and name it "645ffo40-5081-101b-9f08-00aa002f954e"; 4. Select the item again, set the key value of "default" on the right to "**station", and then exit the registry; 5. Then restart the computer.

Open the "Explorer" and see that no, all the deleted files or folders are in the "** site". It should be noted that the premise of using this method is that after you delete the files or folders, you have not defragmented the disk, and the system is intact, and the files can be retrieved at any time.

Answer: In addition to the free way to retrieve it, in fact, you can try a professional method to retrieve the files deleted by mistake on the computer. Here we need to use the "superrecovery" data recovery software, the following is the detailed operation method:

First of all, open the SuperRecovery software already installed on your computer and go directly to the "Wizard Mode". First of all, all you need to do is to choose the location where the file is located. For example:

The files to be recovered are on the hard disk of the computer, you can directly check the "hard disk name" and click "Next".

Then, what needs to be done is to choose the mode in which the software scans next. Because of the recovery of accidentally deleted files on your computer, you can tick the option "Accidental Deletion Scan" and click on "Next". Immediately after that, what needs to be done is to select the file types that need to be recovered.

For example, if you need to recover word, pdf, ppt, etc., then directly check "document" and click "scan".

Ask questions in the mobile file management.

Get it for free |Software that can recover files that have been accidentally deleted on your computer.

1. How to retrieve it for free.

Many times we delete files or documents will exist in the ** station and are not completely cleared, double-click the mouse to select the trash can icon on the computer, in which you can find the documents you deleted, if there are too many documents, you can use the selection search to find more quickly. First of all, when we find that the files on the computer have been deleted by mistake, we immediately open the "** station" on the computer desktop. Then, carefully look for any files in it that you need to get back.

Finally, after confirming that you have found it, select and right-click "Restore".

Free way to get it back.

Second, the method of professional recovery.

In addition to the free way to retrieve the files, in fact, you can also try the professional method to retrieve the files deleted by mistake on the computer. Here we need to use the "superrecovery" data recovery software, the following is the detailed operation method:

First of all, open the SuperRecovery software already installed on your computer and go directly to the "Wizard Mode". First of all, all you need to do is to choose the location where the file is located. For example:

The files to be recovered are on the hard disk of the computer, you can directly check the "hard disk name" and click "Next".

Select the location where the file is located.

Then, what needs to be done is to choose the mode in which the software scans next. Because of the recovery of accidentally deleted files on your computer, you can tick the option "Accidental Deletion Scan" and click on "Next". Immediately after that, what needs to be done is to select the file types that need to be recovered.

For example, if you need to recover word, pdf, ppt, etc., then directly check "document" and click "scan".

Select the mode of the software scan.

Finally, after waiting for the software to complete the scanning, you can preview the list of scanned files for free. After confirming that you have found the files you want to recover, select and click the "Recover" button in the lower right corner of the interface. If you don't scan the files that were accidentally deleted on your computer, you can also go back to the main interface of the software and try the "Deep Scan" function.

The question is asked by the phone.

Then you can first check what kind of file is deleted by mistake, if it is an ordinary deletion, you can open the ** station to see if there is a file exists, if there is a restoration operation, if not, it is a permanent deletion operation, you can refer to the following tutorial to recover:

Step 3: After that, the interface displays the read computer partition information, check the partition where the accidentally deleted file is located, and then click the [Start Scan] button, the user will scan the partition data, and wait patiently for the completion. (If you know that you have deleted the file format by mistake, you can click the [File Settings] button to customize the scanning file format and then start the scanning work.)

Step 4: After the scanning is over, find the format corresponding to the deleted file on the left side of the interface and click it, the specific file information will be displayed on the right side, find the deleted file and check it, and then click the [Next] button. (Double-click to enlarge the file to better determine whether it is the desired file).

Step 5: Click the [Browse] button to select the storage location of the recovered files, click the [Recover] button to carry out the last step of the accidentally deleted file recovery work, after the recovery is completed, a prompt box will pop up, click the [OK] button to view the deleted files after recovery.

1. You can use the file repair tool of PC Manager to repair.

2. First of all, open the PC Manager toolbox.

3. Find the "File Recovery" tool.

4. Click "Recover Deleted Files".

5. Wait for the scan to end, then you can find the deleted files, and select Recover.

How to recover deleted computer files? Tutorial on how to recover data.

<>2. Then find the start icon in the lower left corner of the computer, and right-click this icon.

3. Then click Task Manager in the pop-up selection box.

4. Click Performance Options in Task Manager.

5. After entering the performance page, find Open Resource Monitor below and click on it.

6. Then continue to click on the CPU to switch to the CPU settings interface.

<>9. Then right-click the file, end the process of the file, and then delete the file again.

Since the file is open, it cannot be deleted, and the solution is as follows:

1: Close the program that opens the file, if you don't know who the program is occupied, you can go through Task Manager -->"Performance tab"--Search for the relevant file name > Resource Viewer, and the search is shown in the second ellipse in the figure below

2: If Step 1 still can't solve the problem, it is recommended to use the file shredding function of 360 Guardian (open 360 Security Guard--> click on the lower right corner"More"button to find "File Shredder"), see image below

Right-click on the taskbar at the bottom of the desktop, select the Task Manager option in the drop-down menu, and click to enter the Task Manager.

At this time, we click on the process option above the task manager, view the files or folders we need to delete, run the process, and select End Process.

Of course, sometimes we may not find the process we want to end in the task manager process, in this case we can click on the performance options above the task manager.

Go to the Performance Options screen, and then click Resource Monitor at the bottom right to enter the detailed process list interface.

Enter the resource monitor interface, we select the CPU option in the upper menu bar to enter the CPU interface (the process needs the support of the CPU to run. )

At this point, we can see the list below that lists the names of the processes we searched for, and then find the specific process and click to end the process, at which point we can delete the stubborn files or folders.

The first. The first thing you want to delete is to look at the name of the file.

Then find the file in the Task Manager or the Processes tab in 360.

After that, the process is ended.

The second. Right-click) Windows 7 Taskbar - Launch Task Manager - Performance - Resource Monitor - CPU Tab - Associated Handle - Search Handle - (Enter) Folder Name to Delete - Search to the process associated with the folder name handle (The deletion of the folder was failed because the program process was calling the folder. - right-click) the process - end the process - pop up a warning dialog - confirm to end the process, and then you can delete the folder or file perfectly.

The third. Remove with Unlocker!

Unlocker is a free right-click extension tool, after the user installs, it can be integrated into the operation of the right mouse button, when the user finds that there is a file or directory can not be deleted, just press the "unlocker" in the right mouse button, the system will pop up a dialog box, select delete, and then OK. The program will immediately show you which programs are occupying the directory or file, and then just press "unlock" in the pop-up window to unlock your file. The unlocker is different from other unlocking software in that it does not forcibly close the programs that occupy the files, but unlocks them in a way that disconnects the files from the program, so it will not cause the user to lose data due to the forced closure of the program like other unlocking programs.

3.The first operation is carried out in safe mode (how to open safe mode by searching for yourself), and it should not be black. To do so, turn on Safe Mode first.

4.Some folders can't be deleted, saying that they want ad** (can't remember) permissions, search, and they can also be deleted according to the operation. But first stop those open programs, that is, the above 3 steps to operate.

The previous ones have already been said very well, and I would like to add a small method. For example, if I delete the multisim, I end up with a few stubborn ones. DLL small files, even with a task manager.

At this point, you can try changing the suffix of these files, for example. txt, it's OK to delete it after restarting.

Go to Task Manager and find the program that is running.

After termination, you can delete it again.

You close all the apps that have this file open. Then refresh your computer again. Delete it again!

There are some programs that start automatically when you boot up. You turn those programs off as well.

Open Explorer. Click File in the top right corner. Select New Task from the drop-down list. Enter in the New Task window. Click OK. Can.

You can exit, close all programs, delete the cache, and delete it from the new.

What should I do if the file is occupied and cannot be deleted or modified?

I still can't delete it, I just followed the steps, and it's useless.

Delete the missing text of the high Li how to recover this argument.