What should I do if there is a sizzling noise during the recording?

There is a sizzling print when the video is recorded, that's because it has been interfered with, you can see that it is the interference made by **, which may be a problem with the mobile phone itself.

There is a sound when recording, and if there is noise, it is generally a problem with the setting, or there is a problem with the video recorder, you can re-check it to see if it can be reset.

The noise problem of the camera should be checked to solve the root cause in the first place, first turn off the microphone to record a playback, listen to whether there is any noise, if not, that is, the microphone has a problem to find the reason on the microphone; If the noise persists, the possibility of a malfunction can be ruled out. Faults can only be solved by narrowing the scope of faults. When editing, you can remove the audio signal (including the sizzling noise, of course), but you can't "cut out the noise".

The solution is to re-dub in post.

When you record a video, there is noise because the quality of the surrounding environment is not very good, and if you want to be extreme, you have to record in the studio.

If there is noise when recording the phone, it should be that there is a problem with your microphone, you can choose to restore the phone to factory mode to try it, or go to the mobile phone repair department to change the microphone.

There are many reasons for noise, one is that the microphone enables the sound enhancement function, and activating the sound enhancement function will cause noise, and canceling the sound reinforcement function will cause noise.

In addition, during the recording process, there is a rustling sound, that is noise, good microphone hardware comes with noise cancellation function, but most microphones do not have noise cancellation function, and the general screen recording software does not have noise cancellation function, but there are also good screen recording software with noise cancellation function, you can try QVE screen recording, with noise cancellation function, microphone sound enhancement function, perfect noise elimination.

There is a noise when recording, indicating that its recording effect is not good, and the surrounding environment is not quiet, it is best to ensure that the surrounding environment is quiet.

Whether you use a video recorder or a mobile phone has a squeaky noise.

That's the sound of electricity.

This is because of the quality of the product, you get what you pay for, and the equipment you buy is too bad.

1. Check the camera recording mode, automatic or manual, and turn down the recording level sensitivity.

2. Whether there is an external microphone, if you connect an external microphone, see if there is a low-cut function, and turn on the low-cut.

3. Buy a better microphone with a higher signal-to-noise ratio, which can basically solve the problem of noise floor.

4. If there is still a noise floor, it may be environmental and signal interference, don't worry, the general editing software has a one-click noise reduction function.

Find this feature and cancel noise with one click.

This depends on what the specific sound is, generally speaking, there are the following two situations: 1. The sound of burning cannons: 1. There is a discharge phenomenon (cleaning and drying) on the board.

2. Tail plug leakage (cleaning, drying). 3. The paper tray of the receiver is damaged or of poor quality. 4. Short circuit and leakage of flexible cable.

5. False welding and leakage of audio peripheral components.

If there is noise during the recording, you can edit it in the curiosity section, and then filter out the noise and change the frequency.

If the video is printed with qualifications, it may be that there is a problem with our camera, or the camera is too old, you can try to replace it with a new one, or add a silencer.

If you have a magnetic field in the environment, this may happen, if the environment is normal, I feel that there should be a problem with your hardware, you can take it to the after-sales service to check, the general normal mobile phone now has no such problem.

What should I do if there is a stabbing murmur during recording? There was such a murmur during the recording. It's your external environment itself that has such a voice.

It's inevitable that you'll have such a sound in a noisy environment. If you are in a relatively quiet environment, there is still such a noise. It should be your phone or camera.

You can go and get a better camera.

This depends on what storage you choose when recording at that time**, now it is hard disk storage, and there will be no noise like you said.

There is a squeaky noise, usually due to the signal being interfered with, and you better keep your electronics such as mobile phones far away.

It is the beginning of the recording noise to keep other devices away from the recording without interference.

It means that the recording equipment may be slightly aged, so there is this squeaky noise.

What should I do if there is a sizzling noise during recording? If you choose the mainland, there will be no recorded noise, and you can use other software to remove the noise from the recorded recording.

Explain that the environment in which you are recording is not particularly quiet. You'll have to find another quieter place to record.

It is possible that there is signal interference around you during the recording time, or there is interference with the influence of the machine.

It may be caused by the equipment being used being too close to other electronic products, there is magnetic field interference, try to stay away from other electronic products.

That's the sound of the current, and there is no way to clear the phone that comes with it. Unless you remove the reason.

Make sure that there is no noise in the surrounding environment, and try not to make noise during operation.

You can choose to repair your phone, or turn it off for a while and turn it back on.

Summary. It's because of the setting that you can turn on noise cancellation.

Open the phone settings icon and tap Accessibility options.

What's going on with the noise in the video recording of the iPhone.

It's because of the setting that you can turn on noise cancellation. Open the handroom machine settings icon and click on the auxiliary ruler and assist function option. Click on the audio **option, and after entering the page, turn on the **noise reduction button on the right side.

It didn't work. 1. It may be that the sound of the mobile phone camera is turned on. After the phone takes pictures, the camera will make a shutter sound when the camera sound is turned on, and the solution is as follows:

Open your phone's camera settings and turn off the camera sound in the settings. 2. It may be because of the connection between the mobile phone camera and the mobile phone motherboard. If the camera cannot be turned on normally, it will make a sizzling opening sound, so you need to bring the mobile phone and the mobile phone purchase invoice and other relevant certificates to the after-sales maintenance service center for maintenance and inspection of the camera.

3. It may be because of an error in the mobile phone system. The camera does not turn on properly after a phone system error, and the state referred to makes a sound. The workaround in this case is:

Turning off the phone as a tease and then turning it on to see if the camera is abnormal, or resetting the phone settings can also solve the problem of phone system errors. 4. It is also possible that the mobile phone battery is abnormal. After the phone turns on the camera, the screen brightness of the phone will be automatically adjusted to the maximum, and at the same time, the camera will also increase the power consumption of the phone, and the abnormal increase in power will cause the phone to emit the sound of current.

At this time, the solution is: go to the repair and after-sales service center to check or replace the mobile phone battery.

Summary. Try adjusting the volume of the microphone. In general, there are several reasons for noise in monitoring conversations:

1.The volume is not set properly, and the volume is too loud, which is a major reason for the noise of the microphone. 1.

The cause of current sound is definitely directly related to the hardware, the hardware is too poor, it is difficult to avoid, there are also quality problems with the connecting wire, and whether there is a radio transmission and reception around, such as mobile phones, radios, walkie-talkies, etc.

A lot of noise was found during the recording, recording, and playback of the monitor. How to get rid of noise.

Hello Hello A lot of recordings have noise and our recording soft spine album has nothing to do with it, mainly our settings, you can try the following: double-click in the bottom right corner of your screen to open your "Audio Manager" (or from the Start = >> Settings = >> Control Panel) = >> Click on the "Mixed Wild Wisdom Bending Macro" tab = >> in "Recording".

Hello, you can use the editing ** software to eliminate noise, such as Sound Stimulation Huiying, Bee Clip Select the Select All button in the toolbar, select the whole audio to burn, click the noise reduction button in the toolbar to open the noise reduction dialog box, select the clipboard in the dialog box, and select the clipboard noise version in the preset. Click the OK button. 【

Try adjusting the volume of the microphone. Generally speaking, there are several reasons for the noise in the monitoring conversation:1

Unreasonable volume settings and excessive volume carrying are a major reason for the murmur of the microphone. 1.The reason for the current sound is definitely directly related to the hardware, the hardware is too poor, it is difficult to avoid, and there are quality problems with the connecting cables.

If you are using a vivo mobile phone, you can check the processing method of noise in the recording

1. Try not to move the mobile phone or rub against other objects when recording;

2. Avoid recording in a noisy environment;

3. Keep your phone closer to the sound source when recording.

This depends on what the sound is, generally speaking, there are the following two situations:

First, the sound of cannon fighting:

1. There is a discharge phenomenon (cleaning and drying) on the machine board.

2. Tail plug leakage (cleaning, drying).

3. The paper tray of the receiver is damaged or of poor quality.

4. Short circuit and leakage of flexible cable.

5. False welding and leakage of audio peripheral components.

Second, the sound of communication:

1. Leakage (rewelding) at both poles of the microphone.

2. Caused by replacing the poor quality casing (replacing the *** casing, or shielding with tin foil, but pay attention to it).

3. The transmitting power is too strong (add resistance to the transmission signal sampling line to reduce the power amplifier power).

It may be that when you recorded, you recorded the noise.

1. The microphone of the mobile phone is not a professional recording equipment, and its recording effect is relatively general, and the biggest use of the microphone on the mobile phone is to ensure that the sound is clear, and it does not consider the recording problem of too much shooting.

2. The mobile phone microphone is omnidirectional, without directional characteristics, and it includes a full range of sounds, and sounds in all directions, including noise, will be included.

3. It is impossible to ensure the quiet of the shooting environment during daily shooting, there is no special recording environment, and it is easy to make the background noise too loud when shooting in relatively noisy conditions.

4. The mobile phone does not have a noise reduction processing device in terms of sound, and there is no very easy software to process sound, resulting in low controllability of recording.

Solution: 1. Use an external microphone.

Combined with the scene of shooting**, you can choose an external microphone to pick up the sound, such as using a wired microphone or a wireless microphone, the external microphone is better than the mobile phone for long-distance sound pickup, which can maximize the sound quality.

When choosing an external microphone, you should choose the kind of directional microphone, when shooting**, adjust the microphone to your own direction, the voice recording will be clearer, and at the same time block the useless noise in other directions.

2. In the later stage, software is used to eliminate noise.

There should be a lot of ** software from friends who do it, and these software will basically have a function, that is, sound processing, you can adjust the channel of the sound, that is, to reduce the noise of the sound, but it cannot completely eliminate the noise, after processing, the noise is much lower than the original film.

3. Re-record audio.

This is estimated to be what many friends are keen on, first shoot with a mobile phone, no matter what the audio, directly eliminate the original sound in the later stage, and re-record a new audio to**, which is like film production, use professional recording equipment to record sound and then integrate it in, which is the most perfect solution.

When recording the screen, try to record in a relatively quiet environment, and at the same time, use headphones for recording. If you don't need to record sound, you can turn off the microphone of the screen recording, so that there will be no noise in the screen recording. At the same time, you can also use Jianying to reduce noise on the screen recording, take iPhone11, Jianying as an example, you can refer to the following steps to set up:

1. After opening Jianying, select the option to start creating.

<>4. After clicking, select the noise reduction switch to turn it on.

5. After waiting for the noise reduction to finish, click the OK option below.