Why do I install a 9600GT graphics card and suddenly it gets stuck when playing games

At the beginning of playing, the process is very simple, and the problem of the driver is generally ruled out.

There are two possibilities: 1 The heat dissipation of the graphics card is not good, see if the temperature of the graphics card is too high, if so, please deal with it accordingly.

For example, whether the heat sink is not in good contact with reinstallation, etc.) This is less common for new cards.

2. Whether the power supply is insufficient First, whether the power supply to the whole machine is insufficient Second, whether the power supply of the graphics card is insufficient PCI-E power supply 9600GT should be enough, but the old PCI-E X16 specification power supply will have insufficient power supply, which requires external power supply.

In addition, 3600+ with 9600gt is a little more difficult to overclock (overclocking, pay more attention to whether the power supply is enough).

By the way, I despise the 3rd floor Low frame rate has nothing to do with network speed Internet speed is related to latency High latency does not mean low frame rate This should be popularized as basic common sense Recently, there are always people who associate low frame rate with Internet speed.

It may be a problem with the internet speed, so it is recommended to observe it for a few more days.

Take a look at the driver of a different graphics card.

Heat dissipation issues!! CPU or graphics card. Mine is also a 9600gt fierce fighter. I haven't played Warcraft, I don't know how much to run, I want to ask you, how many points did you run in 2006?

Put on AMD dual-core patches,Clean up system garbage in time,Pay attention to virus detection,There is also your power supply is not caused by insufficient power,Like your bottleneck is that the CPU is too poor,If you replace it with 5000+, it will be much better,There is also a motherboard problem,See if the PCI interface is not suitable for the 9600GT graphics card,Use GPU-Z to view,If the bus interface shows X8 or X4 at the end, that's its problem,Generally it should be PCI-E X16 @x16 (that is data later).

I just changed the colorful 780g motherboard, it's very easy to use, 4000+ can be exceeded without voltage, the original frequency is.

It feels very easy to use

It is estimated that you need to get an AMD dual-core driver patch, and there are many people who use dual-core drivers with similar problems.

If the 9600gt graphics card replaced by the landlord is new, you can call customer service for consultation if there is a blurred screen, and hardware damage will generally be ruled out. Landlords can start with the following points:

1.Check to see if the case is well ventilated, and in the summer it is common to remove the case cover on the lower side to maintain good heat dissipation.

2.The landlord can check whether the power supply of his host computer meets the requirements of a high-efficiency graphics card. Generally, more than 300 power supplies will be used.

3.Clean up the chassis dust in a timely manner.

**Drive. Generally, the life of the graphics card will be about 4 years, the reason is mainly due to the fact that the dust of the cooling fan has been used for a long time, which reduces the speed and the heat dissipation efficiency, and some simply do not rotate, at this time your graphics card is in danger, and it may cause the chip to burn out after a long time, and the screen is inevitable.

I hope that the landlord will troubleshoot as soon as possible and play the game smoothly.

Yes, the graphics card driver has not been reinstalled.。。

There is also the installation of the system, don't ghost greedy.

The drive is carefully assembled.

The problem is in the graphics driver.

Reinstall the driver, it may be that the driver is not installed, if it is still like that, replace the graphics card, install the 9600gt on your friend's computer to see if there is a problem, if it is still like that, just take it back to the merchant and explain the situation to him, and change the graphics card.

It may be caused by the poor workmanship of the graphics card, which causes the screen to freeze, or the heat dissipation capacity of the graphics card fan is insufficient.

Your graphics card driver is not installed properly, you need to reinstall the graphics card driver, or you change the system. If that doesn't work, you should go to a graphics card provider.

After reading your description, there may be the following problems:

1. You said that when you used to use 9400, sometimes the screen would be blurred, and it is possible that the computer has not been cleaned for a long time, resulting in poor heat dissipation of the graphics card.

2. You said that after upgrading to 9600, it often crashes, one is that the driver may not be installed, try a few more versions of the driver, because it is an old card, it is not recommended to install the latest version of the driver, in addition, it is necessary to pay attention to whether DX10 is installed.

3. Power supply problems, after all, the power consumption of the 9600 graphics card is much larger than that of the 9400 (the power consumption of the 9600 is about 100W at full load), check whether your power supply is enough, and there is no problem with the power supply of 300W.

4. The power supply capacity of the PCI-E interface of the motherboard is problematic, if your motherboard is relatively old.

This problem often occurs after upgrading the graphics card with high power consumption for the motherboards of second- and third-tier manufacturers.

5. The quality of the graphics card itself is a problem, and the quality of the memory particles is not up to par.

Memory incompatibility. Regular usage doesn't work that way. You just take the 512 down.

Blurred screens are mostly caused by hardware problems.

Focus on checking the memory and graphics card.

If there are multiple memory roots, you can plug in only one test machine in turn.

If it is confirmed that it is not a memory problem, then you can replace the graphics card for a test test.

Also, check the working temperature of the hardware, and pay attention to the speed if there is a fan.

9600 is actually not very bad.

But at least it's much worse than your current GT610, and it's much worse to go, so why change to 9600 with your configuration

In addition, 9600 can now brush the core There are a lot of fake cards in the market, you can use GPU-Z to check the chip to know whether it is true or false.

The screen is very simple The graphics card is not good, not only the problem of adjusting the video memory parameters, but also the heat dissipation design of the graphics card manufacturers themselves, or manually reducing the core parameters of the video memory by themselves, it will be slightly better.

The graphics card of the 9600 is originally hot, and if the heat dissipation is not good, it will definitely crash due to the high temperature. Anyway, why do you want to change the original card, just change it, and change the old card, I really can't understand you!

Your power supply is too small. Change to a 500w one.

You have a problem with your graphics card, go and change the graphics card.

Maybe you bought a fake card ......