The new computer crashes after half an hour of booting

Since it is a newly installed machine! I think there may be 3 main problems!

Clause. 1. There is a problem with the graphics card, the brand of Xiaoyingba is not very good, I think your graphics card is silent!

Clause. Second, memory compatibility problems, try to change the slot! Or ask someone to borrow a memory from another brand and come back!

Third, the CPU fan is not installed!. I've tried to run the e2160 when there is no fan (I don't remember plugging it in), and it only freezes at 100% CPU running rate!

See if the drivers are all installed in place... In the not to unplug some small hardware in the plug in does not work to reinstall the boot handle...

The machine just equipped will have compatibility problems, check the memory, graphics card, and the socket handle of the radiator.

1. There is a problem with the system.

2. Hardware compatibility issues.

3. It may be that when you move, a piece of hardware is loose, you plug it back in and take a look. Check the sockets of the memory, graphics card, and heatsink.

It may be a problem with the film, sometimes the film is not good, turn on the storm and it will freeze.

Install a 360 security full disk scan to kill the Trojan.

It's time for the CPU fan to be bigger.

Irregular crashes are largely due to heat dissipation problems.

Reinstall the system with ghost installation

There's a good chance that your CMOS is not set up properly, get the CMOS battery off, and then get it back up in two minutes, and try it

What is your hardware configuration?

There are many reasons for computer crashes, there are Trojan horses or viruses, reinstall the system, CPU overload, illegal operations, may cause crashes, it is recommended that you install 360 antivirus software for virus detection and killing, and then install 360 security guard, use hardware master to detect your system.

Slow alarms are memory problems, and one long and several short ones are graphics card problems.

1. Poor heat dissipation, the CPU should maintain good ventilation, which is very important. Working too long can also lead to: CPU heat dissipation problems are also an important cause of computer failures.

2. There is too much dust in the chassis. Please clean it in time and keep the inside dry and clean.

3. It may be that the memory module is loose, and it should be pulled out to check whether it is damaged.

Aging or improper use of hard drives is also one of the reasons.

4. There are compatibility problems with software and hardware.

5. The memory occupation is too large, and the unnecessary programs or memory configuration are low.

6. There are logical or physical bad sectors in the hard disk.

7. Viruses. Infiltrate the anti-virus software.

8. There are too many junk files or fragmented files, it is recommended that you clean up the system junk regularly. You can also restore the system, which is convenient and easy.

9. Check whether the capacitor in the computer motherboard is bursting.

Three methods, it must work, 1: Hardware problem: You first try to take out the strip to blow the dust in the slot clean, and then rub the contact piece of the strip, and then install it.

2: Software problem: Hold down delete when you boot up, and then come out n more English to choose a boot, this is the priority to start, change the first one to VCD-***, and then press F10 to save, automatically restart, put the system disk into the system, 5 minutes to get the software problem, I'm in Wuhan, a disk is only 4 yuan!

Personally, I think that those pirated systems are better than the genuine ones.

Part 3: If you look at the main two fans, the CPU fan and the graphics card fan, if one of the fans doesn't rotate, it must be a problem.

Upstairs said that the 32-bit system can only recognize the memory at most, and the 4G memory is definitely enough, you first check whether the hardware assembly is solid and compatible, but the visual inspection is that the power supply strategy is not enough.

New computers often crash because of hardware, such as incompatibility between hardware.

If the connection between the hardware is not tight, loose will cause poor contact and cause crash.

It is recommended that you turn on the host computer and reinstall each piece of hardware.

If it is a software reason, the loss of system files and the loss of the bootloader will also cause a crash. It is recommended to reinstall the system

I don't think the power supply problem upstairs with the new computer will be. Because of this configuration, do you think the computer will be equipped with a miscellaneous power supply?

Compatibility with this is rarely encountered now. At least I've been repairing for so many years.,I haven't touched so many computers.。。 Hehe, maybe it's a character problem.

It is recommended to replace the system. Or a hard drive. Hard drives now have a very high failure rate. It is not excluded that my brother bought refurbished goods. Take an old hard drive and try it...

Let's check yourself first. See if the memory is loose. Then let's take a look at the compatibility of the motherboard. It should be less likely to occur ... Also, check it from the temperature aspect... Others require more detailed information.

I wonder what brand of power supply you use? You can also use the next software to detect the hard drive, and the problem should be in these two points.

Compatibility issues, the only solution is to replace the hardware.

32-bit win7 flagship, your memory is a little small, change the family, check whether the transformer voltage is unstable.

Are you just buying it and doing nothing and it's easy to crash? Or what game do you play to crash?