What should I do if it says Windows can t find NTIO exe? after booting? 10

Updated on technology 2024-04-19
15 answers
  1. Anonymous users2024-02-08

    C: Windows is not a system process.

    Consider the registry file for virus residues.

    It is recommended that you use the latest version of the mainstream antivirus software in safe mode.

    There is today's latest Rising Star.

    Break a leg.

  2. Anonymous users2024-02-07

    1. All how to eliminate windows boot error prompt.

    Every time I restarted the machine, I got the same error message, but everything worked fine after that. What is the reason? It's common to know that you've made some changes to your computer's settings, but they're not set up completely.

    For example, some programs that Windows is going to load are removed. The next thing to do is to prepare the pen and paper, then restart the machine and write down the error message correctly: including the path and file name.

  3. Anonymous users2024-02-06

    If you want to take the test on another machine, copy it in safe mode or DOS.

    system32 in the system directory should be able to solve the problem.

    If it doesn't work, let's redo it.

  4. Anonymous users2024-02-05

    Then go to the system configuration utility, click on the boot option to check the caution card, and cancel the ESDF-related startup.

  5. Anonymous users2024-02-04

    Run msconfig to find it and delete it.

  6. Anonymous users2024-02-03

    Start Run Enter msconfig

    Start Find entries that contain characters and remove the previous checkmark OK.

  7. Anonymous users2024-02-02

    Just follow the steps below.

    Start Menu - Run - Enter msconfig Enter.

    Put ** in the boot bar insideJust remove the tick in front of the dll.

    1. Start - run - msconfig - start - remove the tick of the add-on ***dll. Restart the computer, usually this is the case, if it still pops up, then proceed to the second step.

    2. Start-Run-regedit Delete the corresponding key in the following location: hkey current user software microsoft windows currentversion run hkey local machine software microsoft windows currentversion run

    According to your description, it should be a virus or spyware that has been removed. But it's also possible that you didn't uninstall a piece of software incorrectly.

    The dll is lost for some reason (most likely because it is a virus or rogue software dll file, which was deleted by the killer software), but its related registration information is still there, resulting in the system still loading it when booting up, but its file cannot be found, so the error is reported.

    If you click "OK" and the system is not abnormal and can operate normally, you can use this software to clean up the boot add-on, and this message will not appear when you boot up in the future.

    autoruns: startup item management.

  8. Anonymous users2024-02-01

    Isn't it better to find a virus? Start-run-msconfig-start, just remove this tick from it.

  9. Anonymous users2024-01-31

    Start running msconfig start and find an option similar to what you said kesenjansosid uncheck OK and then destroy it thereafter.

    1, Start Run type: regedit, then press Enter2, select "My Computer", then click "File" "Export" and click "Save" with any name. The purpose of this is to back up the registry so that it can be restored in time after misoperation.

    The way to recover this is to find the file you just saved, double-click on it, and select "Allow Import".

    3. Select "My Computer", press the F3 key, then enter "Kesenjansosid", click "Find Next", after finding it, be sure to check whether it is a kesenjansosid file, because the file name you gave is incomplete, if confirmed, click "right click" to select "Delete" for the source. At this time, you can enter kesenjansosid to search, after the result comes out, you have to look at the value part behind, you can't just look at the file name, as long as there is kesenjansosid in the file, whether it is written on the side or not, you have to delete! ”

    4, and then press the F3 key again to delete, until it prompts "No corresponding option found".

    5. Restart your computer and see if there is anything wrong with the system.

    Note, if there are other serious problems with HailBolt, please restore the registry.

  10. Anonymous users2024-01-30

    I solved this problem the day before yesterday, and today I studied this virus again (to re-infect my machine), and it actually registers itself randomly under a certain system file, rather than a specific file.

    The solution is: open the registry (open and run as above, type: regedit) to find, enter tlntsvi, and a file with data will be found, and delete this thing.

    Then open the C drive and look for the name tlntsvi (number) in the windows system32 folderexe application, the number is random. This app size is 761k, that's the virus file, delete it!

    I did this step, and after restarting, one of the two IE icons on the desktop was missing, and the machine could be used normally.

    This should be a new virus or variant, there are poisoning found in these days, most antivirus software does not work... Sweat.

  11. Anonymous users2024-01-29

    Enter the msconfig command in the runtime, find this in the startup, and set it not to start.

  12. Anonymous users2024-01-28

    Appears 'C: Windows System32 tlntsvi???exe'There are different theories, and it is generally considered to be a variant of the Trojan virus.

    Click Start Run regedit to find the hkey current user software microsoft windows currentversion policies system shell

    Right-click Select and put Delete, and you're done. Reinstall the system if necessary

  13. Anonymous users2024-01-27

    This file should be a virus file, the suspect brother may have been killed by your antivirus software, but the dust reputation is in the registration of the Qin brother attack table still exists in its startup items have not been deleted, from the start-run-type regedit, enter, and then select - find c: windows will find the item to clear the content inside.

  14. Anonymous users2024-01-26

    Start - Run msconfig to see if there is this item in the startup item, if there is none, just cancel it, or use System Restore to restore until this situation does not occur (Start - Programs - Accessories - System Tools - System Restore).

  15. Anonymous users2024-01-25

    The system is broken! It's better to start with a system! It's the most direct and effective way!

Related questions
27 answers2024-04-19

This one is a bit of a hassle. The first thing you need to do is have a gadget that can crack the gray button, and you need to be able to run it (which is not a fuss). >>>More

3 answers2024-04-19

To install the original Windows operating system, do not use the ghost version of the operating system, because this kind of operating system is mostly a thin system, and the stability and compatibility are very poor. And be careful not to use the driver management software to find the public driver, but should use the factory-built operating system CD or to the official website of Dell ** corresponding hardware drivers for installation, the stability of the operating system is very high. >>>More

8 answers2024-04-19

Windows PE, there are many places on the Internet that can be ** reached, directly installed in the U disk. As for the reply upstairs, I even agreed, but if I think it's troublesome, I'll use PE first. System disk, of course, it is better to have a system disk.

5 answers2024-04-19

Reloading n times doesn't solve this problem either?

There are several possibilities. >>>More

17 answers2024-04-19

The problem of seeds under the mac,In fact, it's because the ** software under the mac is much less than win,Many people are either looking for Thunderbolt for Mac,But it's also achieved through winapp virtual,It's very inconvenient,And it accounts for serious resources,Recommend a mac**related tutorial to you,It's very simple,Follow it and it should be able to solve your problem。 Tutorial address.