How to set up Internet access for W958i 10

Let's take a look at whether GPRS has been activated.

If it's on. Just check your network settings. Or set it up yourself.

The network settings are as follows:

1.Create a new data account first.

Menu - > Phone Settings - > Connections - > Data Communication - > Data Accounts - > Add Account - > PS Data - > Enter Data Account Name (e.g. GPRS).

apn:cmwap

Username: Empty.

Password: Empty Then select Save.

Select the name of the data account you just created (e.g. gprs) and left-click.

Username: Empty.

Password: Null Login Request: Closed.

Preferred Service: Automatic.

Validation: None returned.

2.Then proceed to the Internet settings.

Menu - > Phone Settings - > Connection - > Internet Settings - > Internet Mode - > New Mode Connection Mode: Select the data account created in the first step, such as: GPRS, select the Internet mode you just created - (for example: GPRS), right-click "Settings".

Connection method: Select the data account created in the first step, for example: GPRS use**: Yes.

Password: Empty Select Save.

Call 4008100000

Then tell him that you are w958i, you want to set up GPRS and MMS, and ask him to send the settings over.

Network settings. Settings Configuration Settings Personal Configuration Settings Actions Add Network.

Account number: to be consistent with other licensed Nokia models) or other names.

Username: Empty.

Password: (empty).

Use Preferred Access Point: Cancel.

Access Point Settings:

**:Initiate.

Transmission mode: group data.

Transfer Mode Settings:

Packet Data Access Point: CMWAP

Network type: IPv4

Authentication Type: Common

Username: Empty.

Password: (empty).

ii. MMS.

Settings Configuration Settings Personal Profile Settings Actions Add MMS.

Account number: MMS.

It must be written as such).

Use Preferred Access Point: Cancel.

Access Point Settings:

**:Initiate.

Transmission mode: group data.

Transfer Mode Settings:

Packet Data Access Point: CMWAP

Network type: IPv4

Authentication Type: Common

Username: Empty.

Password: (empty).

iii. Preferred access point.

Settings Configuration Settings Personal Profile Settings Actions New Access Point.

Account Name: cmwap

Access Point Settings:

Transmission mode: group data.

Transfer Mode Settings:

Packet Data Access Point: CMWAP

Network type: IPv4

Authentication Type: Common

Username: Empty.

Password: (empty).

iv. Flow settings.

Set the Personal Profile Settings action and add a new flow.

UDP port range 6790-7170

Use Preferred Pick-up Point: Cancel.

**:Close. Transmission mode: group data.

Packet data pick-up point: CMWAP

Network type: IPv4

Authentication: Normal.

v. Configure settings.

In the Settings Configuration Settings Preferred Access Point, select CMWAP in Settings Configuration Settings Preset Configuration Settings, and select Personal Configuration.

In Settings Configure Settings to enable the preset for all applications, enable it.

vi. Grouping data settings.

Set Data Connect to group data:

1) Packet data connection: when needed;

2) Packet Data Settings Select Modify Access Point.

Access point alias: Random (e.g., GPRS-CMWAP) Packet data access point: CMWAP (case-insensitive).

Okay, the personal settings are complete, and now set up MMS acceptance.

Menu Info Info Settings MMS.

Allow MMS Acceptance Yes.

Configure Settings Settings.

Account number: MMS.

Call 10086 and ask them to send you a network configuration.

I would like to know the MMS settings used in the mainland. My S7350H was bought back from Hong Kong.

GPRS Settings:

Browser -- Server Settings -- Settings 1

Mode name: China Mobile.

Homepage URL:

5230 GPRS Settings:

1. Go to Settings Connectivity Function Bearer Mode, and press the option Add Access Point to use the default settings.

2. Connection name (customizable) Data bearer mode (packet data) Access point name (CMWAP) Username (none) Prompt for password (no) Authentication (normal) Home page (

3. Options: Advanced Settings: Mobile IP (Automatic), DNS (Automatic), **Server Address(**Port(80)

4. Go back to the Admin Packet Data Packet Data link (when needed) Access Point (CMWAP).

5. Network Options Settings Standard - Access Point - Options - Select Access Point - Click on the access name you just customized (set to the connection name mentioned in step 2) - Done.

The above is my personal experience of the mobile phone of the Hong Kong Bank has just been successfully set up, and the upstairs is the setting method of the mainland licensed, and the Hong Kong Bank is slightly different.

5230 GPRS Settings:

1. Go to Settings Connection Settings Access Point, press the option Add Access Point to use the default settings.

2. Connection Name (customizable) Data Bearer Mode (GPRS) Access Point Name (CMWAP) Username (None) Prompt for password (No) Authentication (Normal) Home (

3. Options Advanced Settings Mobile IP (Automatic) Primary Nameserver (Not Selected) Secondary Nameserver (Not Selected) **Server Address (**Port (80)

4. Go back to the connection settings GPRS GPRS Access (when needed) Access Point (CMWAP).

5. Network option Set Default Access Point (set to connection name mentioned in step 2) - Done.

Settings - General - Network - Cellular Data Network.

Cellular data: APN: CMNET

Username (not required).

Password (not required).

MMS: APN: CMWAP

Username (not required for Sakura).

Password (no spine search).

MMS**::80

Maximum message capacity for MMS: 50,000

This is the .. of the holeSet up a restart. See if there's a small e next to the signal bar in the upper left corner!

First of all, make sure that you have opened GPRS, how to set it up, don't say it, you call 10086 manual service to ask him, and he will send you a message to set it up!

If it doesn't work, just do a factory reset (*

If the above method doesn't work, go to Nokia customer service.

As with licensed goods, the settings will not call ** to customer service and ask them to send a message to set up a text message for you.

The Nokia N8 Internet is set up correctly as follows:

1. Select "Settings" in your phone - Mobile Network - Access Point Name (APN) - New APN.

2. After entering the new page, you can fill in CMWAP for "Name" and cmwap for "APN".

3. Enter 10 0 0 172 for **, 80 for Port, and do not need to fill in for Username and Password.

4. "Server" can be filled in the **** of the operator. "MMSC", "MMS**", and "MMS Port" do not need to be specified.

5. Enter 460 for "MCC", 01 for "MNC", and do not need to fill in "Authentication Type".

6. Set "APN Type" to default, "APN Protocol" to IPv4, and "APN Roaming Protocol" to IPv4.

7. After the setting is completed, you can use your mobile phone to surf the Internet.

Open the mobile phone function table, click Settings in turn - connection function - Settings - Bearing mode - Add new access point - automatic search, haha, see the familiar 3GNET, select OK, delete all others, done!

After changing the card, it is recommended to re-set the access mode according to the operator through the "setting guide" of the mobile phone, generally you can see the "setting guide" in the application or settings, you don't need to operate the whole process, if you are connected to Unicom 3G, the default is through 3Gnet connection.

You rewrite the mobile network design format and use the mode that supports 3G, and that's it!

Check out the tutorial on the Saipan forum.

I'm N8800E Generally, I go to the sales hall to ask this question.