What should I do if the pipa shaft can t be twisted, the pipa shaft is too slippery, what should I d

First of all, try to put it in a dry place, and put a towel on it when twisting the shaft to increase friction.

Again, pull it outwards and downwards, and if that still doesn't work, you can drop a drop of lube a little, but be careful not to get dirty or corrode the piano.

Pipa (English name"lute"It is known as the "king of plucked musical instruments", "the first plucked instrument", and a plucked stringed instrument. Wooden, the speaker is semi-pear-shaped, with four strings on top, which was originally made of silk thread, but now it is mostly made of steel wire, steel rope and nylon. The neck and panel are set to determine the "phase" and "fret" of the phoneme.

When playing, it is an important national instrument that can be played solo, accompaniment, ensemble and ensemble. The pipa is a traditional plucked musical instrument in East Asia with a history of more than 2,000 years. The earliest musical instrument known as the "pipa" appeared around the time of the Qin Dynasty in China.

The word "jue" in the word "pipa" means "two jades collide and make a pleasant sound", indicating that it is a musical instrument that makes sound by playing the strings. "Than" means "string equal". "Ba" refers to the fact that this instrument is always attached to the player's body, unlike the qin that does not touch the human body.

Before the Tang Dynasty, pipa was also the general term for all plucked musical instruments of the Lute Qin family (also known as the Lute genus) in Chinese. The Chinese pipa spread to other parts of East Asia, where it developed into the current Japanese, Korean and Vietnamese pipa.

In the history of the Han nationality in modern China, there are two major schools of pipa: the "Shanghai School" (Pudong School) and the "Zhejiang School" (Pinghu School) Pipa. The pipa art of the Pinghu School has considerable historical value for the study of national history.

What area are you in? Usually this problem is caused by the humidity of the air.

If you really can't twist it, you can first adjust it to the relative pitch without delaying the practice, and then wait for a while, when the air is a little drier, you can easily twist it.

Do not twist it too hard, as it may damage your lupa.

In addition, you should also be careful not to tighten it too tightly, and loosen it when it is timely.

Rosin is useful, I've used this before

The pins of the pipa are easy to loosen, and it is very normal for the strings to be loose, and we usually tune the ...... once every few daysIt's impossible to keep it loose, but you can smear some chalk ash or rosin at the junction of the shaft and the piano, which is less likely to loosen Also, the strings of the new piano are easier to run, you can adjust them and shake them from side to side on the strings, be careful not to break the strings Then if you run and tune again, repeat a few times and it shouldn't be so easy to run!

It would be better to loosen the shaft and apply some powder or rosin on it, and then be sure to check that the shaft is securely installed.

If it's too slippery on the outside, there's nothing you can do. You can buy a piece of rosin and use scissors to make a powder and coat it in the shaft.

It's best not to use rosin, it sticks to it when it's hot in summer, it's better than 502! It's best to use chalk and draw a layer on the shaft, it's super easy to use, I've been playing the piano for 12 years, and I've always used it like this, saving time and effort, and it's economical!!

Wrap it in a cloth or screw it up, or a non-slip mat will do.

You can play a little erhu or cello rosin.

You can buy four anti-running string mechanical switches, I use this one, now I won't loosen the strings, share with you.

Apply rosin, if the gap is too large, you can wrap adhesive tape.

Why don't you try it when you buy it, the pitch has high requirements for the shaft, and you can smear some powder on it.

The lute shaft is too slippery, what should I do?

The pins of the pipa spine are easy to loosen, and it is very normal for the strings to be loose, and we usually tune the ...... once every few daysIt's impossible to keep it loose, but you can smear some chalk ash or cherry blossom at the junction of the shaft and the piano, so it's not easy to loosen Also, the strings of the new piano are easier to run, you can adjust them and shake them from side to side on the strings, be careful not to break the strings Then if you run and tune again, repeat a few times and it shouldn't be so easy to run! It would be better to loosen the shaft and spread some powder on it or apply rosin, and then be sure to check whether the shaft is installed firmly. Additional Information:

The lute shaft is used to adjust the pitch. In the case of a certain string length, the purpose of adjusting the pitch can be achieved by changing the tightness of the string. The tone when the string is tight is higher than when it is loose, and the tension can be changed by twisting the shaft.

There are many instruments with shafts, and almost all stringed instruments, including plucked strings, have shafts. Piano shafts usually have the following types: 1. Wooden shafts:

This is the most common shaft, and the wooden shaft used in traditional musical instruments is a simple structure that relies on the friction between the shaft and the wood to hold the strings. Others are replaced with metal, and a wrench is required for tuning. Piano, guzheng, dulcimer are such shafts.

2. Gear shaft: mostly used in guitars, double basses and other musical instruments. Because of the gear drive, it is more labor-saving when tuning.

3. Spiral shaft: There is a spiral in the shaft tube, which can play the role of fine-tuning. Some erhu uses such shafts.