window10 can t be turned on

Force a reboot and choose to skip the system account registration page. After entering the desktop, register a Microsoft win10 account, and use the email and SMS invitation code to verify the activation. In the future, you can format the C drive and reinstall the system after the official website**.

Reasons and solutions for computer not turning on:

Step 1: If the power supply does not respond, then check whether there is a problem with the power supply, poor contact, hardware, etc., and go to the second step, if it is unable to enter the system, it may be an operating system or software problem to go to the third step.

Step 2: Check whether there is a power supply problem, first see if the power supply is not plugged in well or there is a problem with the plug, if you are using a battery, then plug it in and try again. You can go to a friend or go to a computer repair shop or sales store to find the same model of power supply to try it.

After replugging the power supply, press the power button again, and if it still can't be turned on, then press it for a while. If you change someone else's power supply to turn on, it means that there is a problem with the power supply, if it proves that the power supply is fine, it may be the hardware reason, go to the fifth step.

Step 3: Go to the last correct configuration to adjust, turn on and press and hold F8, enter the advanced options page, select "The most recent correct configuration", and press Enter. If it can enter the system, it may be caused by viruses, incompatible hardware drivers with the system, or operating systems.

After entering the system, run the anti-virus software, check and kill the virus, if there is a virus, restart the computer after the anti-virus, if it is not normal, it may be caused by the incompatibility of the device driver and the program, delete the graphics card, network card and other drivers, restart it after removing the driver, if there is still a problem, then go to the next step.

Step 4: Repair and install or reinstall the system, set "Optical Drive as the first boot device" in the BIOS, then insert the system disk, and press the R button to perform "Repair and Installation". If the fault persists, just at the beginning of the system, select "One-click GOST to restore the system" or use the system disk to reinstall the system.

Step 5: Check whether there is a hardware problem, disassemble the notebook to see if the hardware is loose, generally the hardware is not plugged in well, there will be an alarm sound, the long sound continues to sound that the memory module is not plugged in tightly, one long and one short means that the memory or motherboard has a problem, one long and two short means that the graphics card is wrong. If there is too much dust inside the notebook, it is best to clean it up first.

In addition, pay attention to whether it is caused by the new hardware, if it is normal before the replacement of the hardware, and it is not normal after the replacement, then check whether it is compatible. If it can't be started at this time, it is best to send it for repair, and the professional will check whether there is a problem with the hardware one by one.

Windows 10 won't turn on the solution.

Method 1: Enter safe mode to fix the problem.

1. First of all, check the power supply problem and check whether the connecting cable has fallen off and the contact is poor. If not, press the power button, if the system logo appears, press and hold the power button to power off, repeat three times. (If you can't enter the safe mode, there may be system problems or hardware, you can try to reinstall the system on the USB flash drive first).

2. Wait for the diagnosis and repair to be completed, and then click Advanced Options.

3. Select Troubleshooter > Advanced Options > Launch Settings and click the Restart button.

4. Press F4 to enter safe mode.

5. Uninstall the recently installed software, driver, and virus in safe mode. It's a good idea to remember if you set up your computer before it won't turn on, so you can quickly fix the problem.

Method 2: If you can't enter safe mode, most of them are hardware problems.

1. Check the display problem first, you can unplug the data cable of the display, only connect the power cable, if the display shows no signal, there is no problem.

2. Disassemble the machine, find the memory module on the motherboard, break the buckles on both sides, and remove the memory module. Use the eraser to wipe the gold finger and put it back in to try to turn it on. If you have other memory modules, you can also replace them and try to boot them on.

If there is no problem, use the same method to detect the problem with the graphics card.

3. You can try to connect the hard disk to another interface, wait for a few minutes and then turn it on.

Method 3: Reinstall the system.

If the above methods are checked and the screen is still black, we can take the method of reinstalling the system with a USB flash drive to solve the problem.

For details, please refer to the detailed steps of the USB flash drive reinstallation system.

Win10 can't turn on the prompt, unable to start your computer normally, the steps to solve the problem are as follows:

1.Click [Advanced Options] on the pop-up prompt screen;

2. Click [Troubleshooting] in the displayed interface;

3.Click Reset this computer;

4.If you select "Keep My Files", personal files (including desktop files, folders created by yourself on the C drive, and files on other disks) will be retained, if you choose to delete all contents, it is equivalent to reloading the grid;

5.Click [Windows only on the drive] and wait patiently for the system to reset.