Lenovo Y470 keyboard into water, Lenovo computer keyboard into water

Your situation will not be warranted after the sale, because the water ingress is man-made, and you need to pay for it yourself.

You can try it coolly, if it doesn't work, go to the customer service to do the test first, the warranty testing is free, detect which hardware is the problem, and then go to another place to repair, not in the customer service repair, the warranty is still the same, does not affect.

If you go to customer service, don't say it's water, just say that the keyboard is out of order or other faults, do the test first, and if the test sheet comes out, if it is not written that it is caused by water ingress, it will be repaired in the customer service, after all, it can save a little is a little.

It will be good to dry for a few days, and this kind of keyboard button is soft rubber underneath, which is used to connect the relevant electrodes, and it is estimated that it will dry if it is left in a cool and dry place.

Don't worry, the keyboard of the laptop is separated by an aluminum plate, and the water will not flow to the inside of the machine, I once repaired the G470 under the nose of my master, and the construction will be about the same, you know what I do.

In a situation like yours, no one will warrant it, because it is caused by the user, and we will not fix this kind of thing, unless they are willing to pay for it.

Summary. Hello dear 1Immediately unplug the power cord of the computer and force the computer to be turned off.

If you accidentally pour water or juice into the gap of your laptop, the water or juice can quickly enter the core area of your computer's keyboard. The laptop does not turn off, and it burns not only the keyboard area of the computer, but also the CPU and motherboard. Once the keyboard gets water, you should cut the power cord within thirty seconds and then force it to shut down to prevent the laptop from short-circuiting.

2.Place the notebook upside down on the table for five minutes. This is done to allow water to flow out of the laptop so that it can't get into the most basic core of the computer, and then continue to dry the keyboard.

3.Wipe down the keyboard with an absorbent towel. Find an absorbent towel or soft cloth and wipe the water stains off the keyboard.

Prepare a pack of cotton swabs and wipe them clean in the cracks of the computer to ensure that there is no liquid residue on the surface.

Hello dear 1Immediately unplug the power cord of the computer and force the computer to be turned off. If you accidentally pour water or juice into the gap of your laptop, the water or juice can quickly enter the core area of your computer's keyboard.

The laptop does not turn off, and it burns not only the keyboard area of the computer, but also the CPU and motherboard. Once the keyboard gets water, you should cut the power cord within thirty seconds and then force it to shut down to prevent the laptop from short-circuiting. 2.

Place the notebook upside down on the table for five minutes. This is done to allow water to flow out of the laptop so that it can't get into the most basic core of the computer, and then continue to dry the keyboard. 3.

Wipe down the keyboard with an absorbent towel. Find an absorbent towel or soft cloth and wipe the water stains off the keyboard. Prepare a pack of cotton swabs and wipe them clean in the cracks of the computer to ensure that there is no liquid residue on the surface.

A small amount of water is added to the arrow keys.

Will it have an impact on the motherboard.

Pro, a small amount of water will not have an effect on the motherboard.

Don't be anxious and scared when water and liquids enter, unplug the power supply and battery as soon as possible, and then find a way to clean up the water traces. Generally fine.

If there is still a problem, you can basically fix it by finding a professional.

After the laptop is liquid, you should immediately unplug the power supply, and then disassemble and clean up the motherboard, keyboard, and parts that have entered the liquid, etc., and then turn on the test after cleaning.

I'll help you in Beijing.

If you are in Beijing, it is recommended that you find a reputable and skilled repair company to help you overhaul it.

It's better to deal with it.

Because after water ingress, it will slowly corrode the motherboard without professional cleaning.

After a long time, you may have to change the motherboard after a problem.

You'd better wait a day or two and let it out into the sun and let it wind.

Since you can open it today, it's no problem, don't worry, you don't need to check.

The Lenovo Y470 notebook was damaged by water and caused a hardware short circuit to malfunction, which was identified as man-made damage by the after-sales staff, and the after-sales service will not provide a warranty. After the water is ingress, it should be immediately turned off and air-dried, and then sent to the after-sales service for testing by the staff.

After-sales service. 1. Install and debug products on behalf of consumers;

The content of the service is diverse.

2. According to the requirements of consumers, carry out technical guidance on the use and other aspects;

3. Ensure the maintenance of spare parts;

4. Responsible for maintenance services, and provide regular maintenance and regular maintenance;

5. Provide consumers with regular return visits or door-to-door return visits.

6. Implement "three guarantees" for products, that is, repair, replacement and return (many people think that product after-sales service is "three guarantees", which is a narrow understanding);

7. Deal with consumer letters and visits and complaints, and answer consumer inquiries. At the same time, we use various ways to solicit consumers' opinions on product quality, and improve them in time according to the situation.

Cut off the power first, and see if there is any problem with the computer after drying, the general keyboard will have problems, and it will be OK to change a keyboard, and the genuine version is about 200 yuan.

It is recommended to disconnect all power sources immediately and send them to the service station for testing.

Try to decentralize the static operation, (remove the power supply, battery and all external equipment, press and hold the power button and don't let go, press three times for five seconds each time) and then power on to see if it is normal, if not, there is no way to send it to the service station.

Correct you this time, why do you want to deceive the after-sales service? If you cause any problems you cause, you have to take responsibility for them. You have to dare to take responsibility for what you do, and Lenovo's after-sales service is not so easy to deceive, if you really can't turn it on, there will obviously be traces of entering the liquid.

Don't cut off the power immediately, don't move the power supply when the water enters, dry it immediately with a blow dryer, and use it every once in a while.

If the water enters the machine, the power supply will be cut off first, and the machine should not be turned on, so first get all the water out, dry it with a hair dryer and then turn it on.

Don't turn it on again, send it for repair quickly, and the motherboard should be scrapped if you turn it on again.

No need to fix it. It can be said that it is scrapped directly. It's more expensive to repair than to buy one.

It is very important to remove the battery immediately after entering the water!

Then immediately dry the moisture on the outer surface, if you can disassemble the machine, you can disassemble it and blow it with a hair dryer, to ensure that the surface is completely free of moisture, and the distance should be far away when blowing, not blowing in one place.

If the inside is dirty, be sure to wipe it clean, mainly on the printed circuit on the film behind the motherboard and keyboard.

At this time, you should turn on the electric blanket, put the keyboard down on the electric blanket, and then cover it with a quilt and dry it overnight.

If the above methods do not work, then you can only send it to the repair shop for repair!

If it's scrapped, don't fix it, because even if you fix it, it won't be very good.