Why is it uncomfortable to look at the computer after the system is reinstalled? Also installed with

1 may be that the refresh rate of your monitor is not high enough, you can debug it to see if you right-click on the desktop and click on the properties in the pop-up menu.

Click Settings - Advanced - Monitor.

Adjust the screen refresh rate to 75 or 85 (this depends on the quality of your monitor, if it is an old monitor, it may not be so high, only about 60, you can see for yourself).

2. Take a look in a different direction! Are there any high-power electrical appliances around the display, and there are things like transformer stabilization or voltage power supply, most of which are due to the magnetic field. Look in a different direction.

Put some books and materials next to the display, reduce the height of the display at the same time, determine the electromagnetic interference**, and effectively block the display from being magnetized, most of which is due to the magnetization of the picture tube by the equipment that generates magnetic fields around the display, such as computer speakers, microphones, high-power audio, etc. without anti-magnetic function. Therefore, it is best not to place your computer in the middle of many electrical appliances with strong electromagnetic fields, and in addition, avoid using speakers that have not been treated with anti-magnetic treatment. The easiest way to do this is to move anything around the monitor away that might be magnetic, except for the case, keyboard, and mouse.

3. Power supply problems.

Check the display properties, right-click on the blank space on the desktop, properties, settings, the three parameters should be 1024x768, 32-bit, 85Let's compare it. In the case of LCD widescreen, the first one is 1440x900

I want to increase the refresh rate of the monitor a little. Right-click on the desktop, Properties, Settings, Advanced, Monitor, and set the refresh rate to 75MHz or higher.

The screen refresh rate is adjusted to 75 or 85, and it is generally set to 85.

It's best to turn down the brightness of your monitor between 72-80 Hz!

If the resolution reaches 1920x1080, there will be waves when you use the VGA link, because the bandwidth of the line cannot meet the refresh rate of the screen, it is recommended to replace the DVI cable, if the display is fine, it is the cable or plug contact is poor.

Generally, it is a problem with the driver of the graphics card, so it is recommended that you reinstall it with the driver disc that came with your computer. Let's take a look at the refresh rate, which can not be adjusted. Try if you can adjust it.

Two possibilities.

One is that the graphics card driver is not installed or is not installed.

The second is that the graphics card driver is installed, and the resolution has not been changed.

The first possibility: click on My Computer, select Properties, click on Hardware, select Device Manager, and see if you put an exclamation point before the last "Graphics Card" item. If yes, you go and get the driver installed.

The second possibility: right-click on an empty space on the desktop, select Properties, then click Settings, then select Advanced, then click on Monitor, and change your screen refresh rate to 75 or more. If you don't have a monitor on your computer, your graphics driver isn't installed.

Screen flicker is generally caused by the monitor's refresh rate being too low.

Solution: First of all, you should install the driver of the graphics card correctly;

After the driver is installed, if the screen is still flashing, please right-click on the desktop, select Properties, in the display settings, select Advanced, and then select the monitor, and generally adjust the refresh rate of the monitor to 85Hz, so that the problem of screen flickering can be generally solved.

If you flash, it's possible that your driver hasn't installed anything.,You're installed with a ghost clone version.,If you drive it, it's possible that the system version is low and you can't recognize those drivers.,Or your system isn't installed and not set up.。 The chance of poisoning is a little less, and the graphics card needs to see if the driver can be installed, which may also cause this situation.

Complex upstairs.

1 Install the graphics card driver.

2 Adjust the screen refresh rate.

I don't know where to find me.

You reinstalled the system, but you didn't have the driver of the graphics card installed, just install the graphics card driver. Just take a look at whether other drives are installed.

The graphics card's displacement resolution is set to 1024

After installing the driver, just adjust the resolution to the maximum (optimal resolution).

Is the resolution the maximum? The biggest is the best.

Turn the monitor to the maximum hertz.

It's best to wear glasses when looking at the computer, I'm 200 degrees now, and I wear glasses when I look at the computer, which can prevent radiation; After spending a long time on the Internet, your face will feel very good, that is, the oily substance secreted by radiation, so you should wash your face within 1 hour. Put a glass of water on the Internet and drink it often! Prevents the corners of the eyes from being cracked.

The situation you said is related to the visual fatigue caused by too long contact with the video screen, in addition to paying attention to reasonable intervals, appropriate outdoor exercise, and if necessary, with targeted **, you may wish to go to the space to learn about the relevant **methods, I believe it will help you.

You can change the screen to a protective color!

But the main thing is not to be in front of the computer for too long.

Please set the computer as follows: (Desktop) - (Right Click) - (Properties) - (Appearance) - (Advanced) - Project Selection (Window) - Color 1L) - (Select Other) Change the color tone to: 85.

Saturation: 123. Brightness:

205 - Add to Custom Color - Selected in Custom Color - OK.

Eye drops, doing massage exercises.

Now the liquid crystal display radiation has been very small, most of the eye discomfort is caused by long-term strong light or not blinking, the former can be adjusted by reducing the brightness of the display, the latter can only rely on their usual rest, potions can only play an auxiliary role.

2 Use eye drops, 3 times a day, to relieve eye fatigue!

3 Eye exercises once a day, morning and evening!

4 Eat lamb liver or pork liver 2-3 times a month, eat more things that are good for your eyes, green vegetables and fruits are of course the first choice!! 5 Drink plenty of water! 6 Sleep at least 8 hours a day, you spend so much time in front of the computer every day, how tired your eyes are, even if you don't look at the computer, you are still using your eyes!

Therefore, sleep, the best time to let it fully rest, must be reserved for the eyes, and sleep must be sufficient!!

7 Do eye movements Up, down, left, right, four directions, turn your eyes vigorously.

8 Wash your face carefully, especially around the eyes!

This is my own practical experience! Hope it brings health to your eyes