What is a large hole socket and the pros and cons of opening a five hole socket

One: large-hole socket is also called high-power socket.

2: The high-power socket is a socket specially designed for the manufacture and use of high-power household appliances, which meets the configuration of 16 amperes (power 4000 watts), which can fully meet the bearing requirements of high-power electrical appliances.

Three: high-power sockets are specially made for these high-power household appliances, in line with international quality requirements and inspection standards, the product line is rich, and with lightning protection, anti-power surge.

Anti-overload, waterproof and dustproof, leakage protection, high-grade flame retardant and other special functions, suitable for the needs of different household electrical appliances in the electricity environment, can solve the household electricity safety problem in an all-round way. In the autumn and winter season, the special high-power socket in the socket is more popular with consumers.

Four: high-power socket, from the jack structure to wiring, plugs are strictly to meet the 16 amperes (power 4000 watts) configuration, can fully meet the bearing requirements of high-power electrical appliances. At the same time, the thermokinetic energy anti-overload technology it adopts combines the overload protection with the power switch, and the response is highly sensitive, when the current load does not exceed the rated load of the socket, the overload protector does not start, when the current load exceeds the rated load of the socket, the overload protector will issue a warning and cut off the power supply within a certain period of time, the higher the load, the faster the power supply is cut off.

The commonly used wall 86 socket is marked with 10A, and the 16A is often called the large-hole socket, and the large-hole socket is used in high-power electrical appliances. The outer diameter length and width are the same as those of the small hole socket, the difference is the width of the hole.

The general socket specifications are the same, but some powerful appliances require large hole sockets, such as air conditioners. If you buy it, they'll tell you.

Is it a 16A three-pin socket??

The advantages of opening a five-hole socket: just turn on the switch of the socket to power on the TV, turn off the switch when not in use to turn off the TV power, the plug does not need to be pulled back and forth every time, it provides convenience and safety at the same time, and can also extend the service life of the socket

Disadvantages: The design may be unreasonable, and a charger cannot be plugged into other holes.

We already know that with a switch, it is possible to turn on the power even without unplugging the appliance. In this way, electricity becomes a convenient and safe thing. Especially for the kitchen and TV cabinet location, there are many electrical appliances that are in standby mode, such as electric kettles, rice cookers, televisions, etc., which are used once for a short time, but they are often used, if the plug is often plugged and unplugged, it will shorten the life of appliances and sockets.

Classified by functional outlets

One single (double) control, two single (double) control, three single (double) control, four single (double) control.

Sound and light control delay switch, touch delay switch, doorbell switch, speed regulation (dimming) switch, plug-in card power switch.

The wall switch narrowly refers to the switch, which actually refers to the large area of the wall switch and the wall socket. There are mechanical, intelligent, flat, and seesaw.

The above content refers to Encyclopedia - Switch Socket.

Because the 9-hole and 15-hole sockets (as shown in the figure below) belong to the 118 type switch socket three-position, horizontal installation, the bottom box adopts the middle box (three-position box), the installation hole spacing standard is 121mm, and there are also standard 120mm. Since the holes in the panel mount are runway type, it doesn't matter if the difference is 1 2mm.

1. The power socket should be installed on no less than two symmetrical walls, and the horizontal distance between the two power sockets on each wall should not be exceeded, and the distance from the end wall should not be exceeded.

2. The ordinary power socket without special requirements is installed from the ground, and the special socket for washing machine is installed from the ground, and has indicator lights and switches.

Provisions

The new national standard for sockets "GB" and "GB" stipulate that 10A sockets use 1 square millimeter copper wire, and 16A sockets use square millimeter copper wires. In the industry standard in the decoration industry, it is generally customary to use square millimeter copper wires in 10A socket circuits and 4 square millimeter copper wires in 16A socket circuits.

Of course, there are a large number of sockets in the same circuit in the home, and considering the trunk current, it is necessary to increase the wire cross-sectional area appropriately. But not so much – unless your wire is a non-standard product.

The above content reference: Encyclopedia - socket.

The socket opening is made with a 35 carpentry hole opener. Generally, from both ends of the door to the inside of the 120 points, and then from the side of the door to the inside of the 21 points, the intersection of the two points is the center point of the opening. After opening the hole, there is 3 to 4 mm of width left on the side of the door, and when the door is pressed, it will invisibly increase the difficulty of adjusting the door.

The size of the full cover, half cover, built-in, hinged can be hidden. The depth of the opening is basically just right according to the epithelium, which is not more than 2 mm below the door plane. However, there are some hole openers that are too thick to use this method.

Socket: Socket, also known as power socket, switch socket. A socket is a socket through which one or more circuits can be plugged in, through which various wiring can be inserted.

This makes it easy to connect with other circuits. Through the connection and disconnection between the line and the copper part, the connection and disconnection of the circuit of the circuit can be finally achieved.

Hello, I'm glad to answer for you, I'm Xiao Liu, a co-teacher who asks a question, good at the field of building materials, and has been engaged in the field of building materials for 3 years, and I'm happy to serve you. What is a five-pin socket with holes around it called? Four-pin five-pin socket.

To put it simply, this type of socket refers to the fact that it has five jacks, one of which is two holes and the other is three holes, which is a power socket with a total of five holes. There is a switch on the five-hole socket, this switch can play the role of controlling the power supply, when we turn off the switch, then the power supply of the socket is cut off, not only can play a role in saving power, and the dust is also safer and more convenient to use.

The universal socket is the old national standard socket, this kind of socket is too small because of the large jack, the contact area between the socket connector and the electrical plug is too small, it is easy to make the plugging force too loose and the contact piece is overheated, thus causing the hidden danger of fire accidents The power cord of this type of socket is often a two-phase plug at one end, and there is no grounding wire

On June 1, 2010, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of the People's Republic of China jointly issued the "new national standard for sockets", which clearly prohibited the production of multi-hole sockets, and formulated higher requirements for standard upgrades Compared with multi-holes, the socket products under the new national standard standard require that the socket in the form of two-phase and three-phase jacks are separately combined (stuffy lead is commonly known as the new five-hole socket), as shown in Figure 2, the power cord end is a three-phase plug, which can meet the three lines of live wire, zero wire and ground car cover car at the same time. It will be safer and more secure to use.