How to connect the wiring of the five hole socket and how to wire the five hole socket?

1. A binding post of the live wire access switch, and at the same time, a wire is drawn from this binding post to the L binding post of the socket.

2. Do not connect the N neutral line to the switch, and directly connect to the N terminal of the socket and one end of the lamp.

3. Lead a wire from the other binding post of the switch to the other end of the lamp.

Landlord, you have mastered the wiring method, first get a cigarette sample** (depending on the distance of 5 holes), cut the insulation of the leather wire with scissors, and connect the corresponding 5-hole LN port column. Then the mains power is connected to the column head at the end of the initial hole, and the ground wire is connected to the column head of the E line in the room. ok

In fact, once the five-hole socket is opened, the switch and the socket are independent, the live wire (red wire) is connected to the L of the switch, a short wire is drawn from the L1 of the switch to the L of the socket, and the zero wire (blue wire) is directly connected to the N of the socket.

Power outlets. Products that have been inspected by the relevant national product quality supervision departments should be used. Generally, medium and high-end products with flame retardant materials should be used, and low-grade and shoddy counterfeit products should not be used.

When installing, the ordinary power socket is installed from the ground, and the special socket for washing machines is installed from the ground, and it is equipped with indicator lights and switches.

How should I wire a five-hole socket? The old electrician taught you by hand that you don't have to ask for help.

The fatal drawbacks of a 70-year condominium are as follows:

1. The property management fee is high, because the 70-year-old residential apartment is better than the ordinary house in terms of property management, so the relative property management fee is higher.

2. The cost of living is high, because the water and electricity costs of apartments are higher than those of ordinary houses, so it will invisibly increase the cost of living.

3. The unit price is high, although the 70-year residential apartment is small in size and the total price is low, its unit price is higher than that of ordinary houses.

Things to note when buying an apartment:

According to the relevant regulations, the nature of the right to use the house and the right to use the land are exactly the same, if the nature of the commercial house is involved, there are only three kinds of residential land, commercial land and industrial land.

A five-pin socket can be divided into two different parts: switch and socket. When wiring, the switch part should be connected first, that is, the live wire should be connected in the socket hole. Then connect the socket wire, that is, connect the live wire with the L wire, connect the neutral wire with the N wire, and connect the ground wire with the E wire.

In the low-voltage power grid, the three-phase four-wire system is used to transmit electricity, of which there are three phase wires (live wires) representing A, B, and C phases, and a neutral wire N (neutral line). For the sake of safety, the three-phase five-wire system is used for power supply in the user use area, and the fifth wire is the grounding protection line PE (ground wire), one end of which is buried deep underground with a metal conductor near the user area, and the other end is connected with the ground wire contact of each user to play the role of grounding protection.

Precautions for installing sockets

If the installation position of the socket is particularly low, when installing, the socket should be equipped with a protective cover, so as to avoid children from putting their fingers into the socket hole, resulting in certain safety accidents. For example, the environment of the bathroom is particularly humid, and it is best to choose a waterproof cover for the socket, so that it will be particularly safe to use.

Too many electrical appliances can not be connected to a socket, so that the socket is overloaded, and there will be a short circuit in the wire. Usually, when using high-power electrical appliances such as refrigerators and air conditioners, it is best to set up a three-pin socket separately, so that the power will not be too high, resulting in tripping.

Kiss, <>

We're glad to answer your questions! The first way to open the five-hole socket wiring: the switch is used to control the on/off of the socket power supply, and can be wired according to the following methods:

Connect the L1 terminal of the switch (FireWire) to the L terminal of the switch, connect the L1 terminal of the switch (FireWire outlet) with the L terminal (FireWire terminal) of the two-pin socket, and connect the neutral wire to the N terminal (neutral terminal) of the socket. The second connection: the switch is used to control the lamp, the socket is not controlled by the switch, and the wiring method:

Connect the live wire to the L terminal of the switch, connect the L1 terminal of the switch with a terminal block of the lamp head, connect the neutral wire to another terminal of the lamp head, and form a loop between the switch and the lamp. Then connect the live wire to the L terminal of the two-pin socket, and connect the neutral wire to the N terminal of the receptacle, and the two-prong socket becomes another circuit. Extended information 1, indoor circuit live wire and five-hole switch socket live wire confirmation method:

As long as the circuit is electrified, whether it is a switch or switch, the live wire is live, and if the color cannot be determined, you can use a voltage tester to test. The key points for the correct use of the test pen are: wear insulated shoes; One hand behind the back of the back; The index finger of the other hand is against the metal cap at the end of the tester, and the thumb and middle finger are clamped between the insulation of the pen body (do not grab the metal rod); When testing the power, be careful not to connect the live wire with the ground wire.

2. When installing a single-phase two-hole socket, if the socket hole is placed horizontally, it should be "left zero, right fire"; If the socket hole is placed vertically, it should be "on fire, down to zero". The three-hole socket should be "left zero, right fire", the protective grounding is at the upper end, the neutral line and the protective grounding must not be connected wrong, and the neutral wire and the protective grounding are not allowed to be connected together. You should be seated according to the color of the wire.

3. Generally, the surface-mounted five-hole socket should not be lower than the ground; Concealed electrical outlets are located at ground level. In order to prevent children from touching, it is good to choose a safety socket with a safety flap, the height of the socket in the same room should be consistent, and the on/off position of the switch should be consistent. Hope mine can help you!

Summary. <>

Hello, dear, I'm glad to be able to your question, how to wire a five-hole socket, help you find out, there are 4 terminals with five holes: L1 switch live wire incoming line L2 switch live wire outlet N zero line GND or three horizontal and one vertical There are two ways to connect the ground wire: 1. Socket with switch:

The live wire is connected to L1, the neutral wire is connected to N, the flower wire is connected to the ground wire, and the L2 is empty: the two wires you said are a live wire and a zero wire, and there is no buried ground wire, in this case, the live wire is connected to L1, and the zero wire is connected to N (please note that the socket without the ground wire will trip when it encounters a short circuit, and it cannot be protected if it leakages).

How to wire a five-hole socket.

Hello, dear, I'm glad to be able to your question, how to wire a five-hole socket, help you find out, there are 4 terminals with a five-hole belt: L1 switch live wire incoming line L2 switch live wire outlet n zero line GND or three horizontal and one vertical There are two methods for connecting suspects with ground wires: 1. Socket with switch:

The live wire is connected to L1, the neutral wire is connected to N, the flower wire is connected to the ground wire, and the L2 can be empty: the two wires you said are a live wire and a zero wire, and there is no buried ground wire, in this case, the live wire is connected to L1, and the zero wire is connected to N (please note that there is no ground wire, and the empty will trip in case of short circuit, and the leakage will not be able to protect the Qinnian potato).

2. The socket is often energized, and the switch is a lamp with a circuit: the simple line of the hail ant enters L2, the neutral line is connected to N, the flower wire source pants is grounded, and L1 is connected to the fire to the light source (that is, the live wire of the lamp is connected to the object).

Dear This question is up to me to answer for you Oh dear dear A five-hole socket is opened, and there are generally two methods, as follows: 1The method of one-key power-off wiring method refers to the use of a switch to control the power switch of the entire socket, which means that the switch on the socket is turned on to have electricity, and if it is turned off, there will be no electricity.

First, connect the live wire of the power supply to L11, and then connect the two holes of L and L1 with a short red wire, and connect the ground wire and the neutral wire to the two ports of E and N respectively, so that the wiring method of the one-button switch can be completed. 2.Switch single control wiring method switch single control means that the switch only controls the power supply of this circuit connected to the switch, whether it is "on" or "off" will not affect the power supply of the other two holes.

To achieve this effect, it is very simple, first of all, it is still connected with the red wire, L1, and then the incoming wire of the power supply is connected to L, L1, generally speaking, L11 is connected to most of the electric lines, and N and E are also connected back to the zero line and the ground wire. <>

If my answer is helpful, please give it a thumbs up (rate it in the bottom left corner) <>

I look forward to your praise, your efforts are very important to me, and your support is also the driving force for my progress<><

If you are satisfied with my answer, <>

You can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood! <>

The method of wiring a five-hole socket is as follows:

Before wiring, let's get to know a five-hole socket, which is actually on the same panel, with 1 switch and 2+3 sockets. Then turn the five-hole socket over and look at its back, and you will find letters and symbols that match the L, N, and ground wires. L represents the live wire, N represents the zero line, and the ground symbol represents the ground wire.

Generally, the color of the home decoration wire is divided into three kinds of red line L, blue wire N and yellow ground wire, when the switch is connected with the lamp, the live wire enters the switch, and the zero wire enters the lamp head, so the connection is to prevent electric shock when changing the bulb. Because there are three wires when wiring, sometimes the switch needs to be connected in parallel with wires, and we must pay attention to the parallel connection of the neutral wire, live wire and ground wire at this quiet time.

Precautions for purchasing sockets

When buying a socket, you should first look at the protective door, you can use a small key to poke into one side of the two holes or the bottom of the three holes, if the small key can be poked into, then the socket is a unilateral protection door, such a socket is safe, however, it is not recommended to buy. High-quality sockets are generally made of silver-nickel-copper composite materials, and the conductivity of silver materials is very good, and silver-nickel alloys can well suppress arcs and make electrical wiring stable and reliable.

When buying a socket, you should also look at the copper materials, observe the jack color of the socket, if the opening is bright yellow, then try not to buy. Because brass is more prone to rust and has a softer texture, its conductivity will decrease if it comes into contact for a long time. If the color of the copper sheet of the socket is red or purple, it means that the socket is of good quality, because the copper is more durable and not easy to rust.