The problem with laptop memory is urgent

OK. Give your jaw in detail.

In general, the memory frequency is independent of the motherboard.

It's to look at the frequency of memory.

But some motherboards have a frequency cap.

will limit the use of memory.

Therefore, it is recommended that the landlord change the memory frequency to the same as before.

Memory sticks. Otherwise, it may lead to problems such as not being able to turn on.

In addition, the same capacity can generally be formed into dual channels.

Taking a step back, it doesn't matter if you don't promote dual channels.

Forming a dual channel is to increase the transmission speed.

Your original 512 indicates that you are also very rubbish.

So increasing the memory capacity is the key.

Dual channels are secondary.

Even if the composition is estimated, the landlord will not feel any difference.

There's also to see the maximum supported memory capacity of your notebook.。

If the maximum support capacity is exceeded, then it will not be read.

Large-capacity memory is going to waste.

All of this can be found in your manual.

You can take a look before you choose.

If the maximum support is two G

Then let's change to a 1g

Or 2G is better.

Far stronger than the twin channels of the two 512s.

That's all for now.

Let's refer to the landlord.

Yes, first determine whether your memory is DDR2 or DDR3, depending on its frequency, if it is DDR2 776, you can replace DDR 2 776 or DDR2 800, basically like this now. If you determine that the core technology and frequency correspond, you can change it. It's okay to have different brands.

Yes, but it's easier to use a single 2g

The odds are very small.

Basically, it is composed of dual channels, and the requirements are the same capacity, the same brand, and the motherboard must also support it. Even if the brand and capacity are different, the granules are the same factory. Same model.

Your different cards, different grains, and sizes. There is basically no possibility of being able to compose.

I can buy everything as long as the performance is the same I can ask the service staff when I buy the memory.

Yes, mine is a three-star one, a Kingston ......No problem, Lou Zhu, don't worry about it, do it boldly......

Yes, there are very few cases of incompatibility...

When we use a computer, if we run large programs, such as large games.

engineering drawing software, as well as multiple programs, if the physical memory of the computer.

If you don't give it, it is easy to prompt the message of insufficient memory, so how to solve the problem of insufficient memory on the laptop? Here's what I've collected about laptops.

The solution to the low memory , I hope it will help you.

Workaround for laptop running out of memory

on the computer desktop.

Right-click on "Computer" and then click on "Properties" at the bottom.

At this time, you can enter the properties interface, and you can see the size of the physical memory below. If the memory is 1GB, it is necessary to carry out the following operations, because when many software runs, it is very used to fully load, prompting insufficient memory, if it is 4GB, it is basically enough, but if you want to make it more smooth insurance, you can do the following.

Method 1: Expand the physical memory.

Because the programs running by the computer need to be executed through the memory, therefore, if the executed program occupies a large proportion of memory, it will cause the memory to be exhausted, so that the machine has no space to react, so the operation will be very stuck, or even crashed. Since the read memory prioritizes the read RAM, it is fast, and if it is insufficient, the computer will call the virtual memory.

However, the data exchange speed of virtual memory is a little slower, so if you want to be more efficient, you can expand the computer memory.

Method 2: Change the virtual memory size.

On the desktop of your computer, right-click on "Computer" and select "Properties".

Enter the main interface of Properties and click "Advanced System Configuration" on the left.

Once you're in Advanced Configuration, click on "Settings" at the top right.

Go to the Performance tab, click on "Advanced", and under Virtual Memory, click on "Change".

Automatically manage all drives for the first project.

Remove the previous checkmark and choose a non-C disk, if the remaining memory of the disk is larger, it is better not to use it frequently; Tick "Custom size"; In the fill in box, the initial size can be set to 1 times the physical memory, and the maximum value can be set to 3 times the physical memory, click "Settings", and then click "OK".

Once you're sure, go back to Performance Options and click OK to restart your computer for your changes to take effect.

Then click "Apply" below and then click "OK".

Go to the final confirmation column and ask if you want to restart the computer immediately to make it take effect, if there is no urgent task in progress, it is recommended to click "Restart Now" directly to make the changes take effect. This solves the problem of too little memory.

1.How to solve the insufficient memory of the laptop.

2.How to fix laptop low memory.

3.What should I do if the laptop prompts that the memory is insufficient.

4.What to do if your laptop is running out of memory.

5.What to do if the notebook often prompts low memory.

6.What to do if your laptop doesn't have enough memory.

Look at your computer's physical memory.

1On the desktop of your computer, right-click on "Computer" and then click on "Properties" at the bottom.

2. At this time, enter the properties interface, and you can see the size of the physical memory below. If the memory is 1GB, it is necessary to carry out the following operations, because when many software runs, it is very used to fully load, prompting insufficient memory, if it is 4GB, it is basically enough, but if you want to make it more smooth insurance, you can do the following.

End Method 1: Expand the physical memory.

1. Because the programs running by the computer need to be executed through memory, if the executed programs occupy a large proportion of memory, it will lead to memory exhaustion, so that the machine has no room to react, so the operation will be very stuck, or even crash. Since the read memory prioritizes the read RAM, the speed is fast, if it is insufficient, the computer will call the virtual memory, but the data exchange speed of the virtual memory is a little slower, so if you want to be more efficient, you can expand the computer memory.

End method 2: Change the virtual memory size.

On the desktop of your computer, right-click on "Computer" and select "Properties".

Enter the main interface of Properties and click "Advanced System Configuration" on the left.

Once you're in Advanced Configuration, click on "Settings" at the top right.

Go to the Performance tab, click on "Advanced", and under Virtual Memory, click on "Change".

Automatically manage all drives for the first project. Remove the previous checkmark and choose a non-C disk, if the remaining memory of the disk is larger, it is better not to use it frequently; Tick "Custom size"; In the fill in box, the initial size can be set to 1 times the physical memory, and the maximum value can be set to 3 times the physical memory, click "Settings", and then click "OK".

Once you're sure, go back to Performance Options and click OK to restart your computer for your changes to take effect.

Then click "Apply" below and then click "OK".