Is it good to use wooden flooring for decoration now? Is silence guaranteed?

Buying wood flooring with silent design, for example, David flooring is very good, and non-slip, green and environmentally friendly, home decoration is really good.

Normally, it is not soundproof, and some even make some noise, especially for those who do not have an insulation layer, after the wooden floor is laid, the footsteps downstairs can be heard very clearly when walking. Therefore, when installing wooden flooring, it is necessary to do a good job of insulation, and it is recommended to fix the keel, which can play a certain sound insulation effect. For decoration materials such as wooden flooring, it itself has a certain sound transmission medium, so if the keel is not fixed during installation, or the insulation layer is not done, then it will produce a lot of noise.

Of course, when purchasing wood flooring, we must also pay attention to the choice of good quality and environmental protection, which are directly related to the use effect.

Each has its own good, but the functionality is different, depending on whether you are installed in **, if it is an office where there are many people coming and going, it is not recommended to Yong wood flooring, wood flooring is more suitable for home bedrooms, and it is recommended to install anti-static flooring where there is a computer.

Types of anti-static flooring.

All-steel anti-static flooring: Compared with the general electrostatic floor, it is different from the edge strips (edged and edgeless), which largely serves the disadvantages of the traditional electrostatic floor, such as simple edge touching and cornering, and also prevents damage to the floor layout and damage caused by man-made bumps.

2.Ceramic anti-static flooring: Compared with ordinary ceramic flooring, it has some anti-static raw materials added in the manufacturing process, and has an anti-static function that ordinary ceramic flooring does not have. The life of this electrostatic floor is also longer than that of ordinary flooring, and it is more convenient to construct.

3.Calcium sulfate anti-static flooring: Calcium sulfate flooring is made of non-toxic and unbleached plant fibers as reinforcement materials, which are strongly coagulated into calcium sulfate crystals and made by pulse pressing.

The edges are banded with electrostatic conductive adhesive strips all around, and the top surface is pasted with galvanized steel plate. Prevents mechanical damage and moisture deformation.

4.Aluminum alloy anti-static flooring: It uses the best substrate and the best conductor in the anti-static floor system, which can dissipate static electricity into the ground in the shortest time.

5.Wood-based overhead anti-static flooring: It uses high-density flame retardant shavings pole core substrate, which effectively prevents static electricity, B2 flame retardant, anti-slip, sound insulation, dustproof, anti-fouling, etc., with strong interchangeability and good decorative effect.

Network flooring: all-steel structure, filled with high-quality cement, strong bearing capacity, floor surface, epoxy resin electrostatic spraying, wear-resistant, moisture-proof, anti-corrosion, good interchangeability, flexible assembly.

You're talking about calcium sulfate anti-static flooring, right? In fact, the structural applicability of these two types of flooring is similar. The calcium sulfate anti-static floor is made of non-toxic and unbleached plant fibers as reinforcement materials, combined with solidified calcium sulfate crystals, and made by pulse pressing process.

Because of its advantages of environmental protection, fire prevention, high strength, flatness and many other aspects, it has become the most widely used material in the raised floor family.

The structure of the composite anti-static floor is exactly the same as that of the calcium sulfate anti-static floor, but the core of the board is a composite high-quality particleboard, and the composite core is a high-density board made of inert adhesive materials after the wood is broken, which is characterized by flame retardant, moisture-proof, noise reduction, and excellent bearing capacity. Because of its good environmental protection and economy, it is widely used in computer rooms, offices, commerce, museums and other fields, and is an ideal raised floor material.

It is recommended to consider the economy or choose the wood composite anti-static floor, after all, the structural applicability is the same, calcium sulfate anti-static flooring is generally used in high-end economic areas and developed commercial areas.

Hardwood flooring is made of hard, meticulous wood fiber construction, and low thermal conductivity, which is better than cement, ceramic tile and steel. Therefore, wood flooring has the functions of sound absorption, sound insulation, sound pressure reduction, and shortening the residual reverberation time, and reducing the pollution effect of noise pollution.

For the average consumer, it is impossible to distinguish the authenticity of the wood. The processed floor is even more difficult for consumers to identify the wood species, so some unscrupulous businesses in order to make huge profits, they use some cheaper wood species to pretend to be precious wood species, such as using"Ash Lotus"Impersonation"Teak"。