What should I do if my computer won t light up?

Updated on number 2024-04-18
8 answers
  1. Anonymous users2024-02-08

    Hello landlord:

    I don't know how the landlord's hands-on ability is, judging from the landlord's description, you can try to operate like this first:

    3: You can turn on the self-test, congratulations on passing, no, continue.

    4: Observe whether it is alarmed, eliminate memory faults, if the landlord confirms, you can skip this step 5: Remove the hard disk, only keep the basic skeleton such as CPU, motherboard, memory, power supply 6:

    Click! Motherboard power pins, observe to be able to boot 7: Yes, then the failure on the hard disk, you can reinsert the cable, or try to replace the IDE slot to solve 8:

    If not, unfortunately, the motherboard may be over, send it for repair or replacement, hehe The above steps can help the landlord to eliminate and confirm the fault point step by step.

    If there is any problem in the middle, the landlord can give me feedback on the problem.

  2. Anonymous users2024-02-07

    First of all, it is necessary to ensure that the jumper and the power cord are all connected

    You turn on the speaker, and then click on the power, if you can hear the sound of entering the system after a while, that is, the sound of booting, that is, the graphics card is broken, if it is not the graphics card is broken, there has been no sound when booting, then you have to take a closer look at whether the capacitor of the motherboard bursts, and there is a problem with the hard disk, unplug the hard disk cable, click on the boot to see the BIOS boot screen No, if you can, it is that the power supply is unstable or the hard disk is broken, if it still doesn't work, that is: your CPU is broken.

  3. Anonymous users2024-02-06

    Do you horn alarm when you turn it on? If there is an alarm, the fault can be judged based on the alarm sound.

    If you don't call the police, it is recommended that you remove all the hardware, keep only the CPU, turn on the computer to see how the situation is, and listen to the alarm sound.

    Then install the graphics card, memory, hard disk, little by little. See which hardware is broken.

  4. Anonymous users2024-02-05

    If it's all right, there's something wrong with your BIOS, or your motherboard's battery is dead.

  5. Anonymous users2024-02-04

    Your hard drive has bad sectors! I used to have your situation, forced to cut off the power and reboot caused by bad sectors, it is recommended that you change a hard disk, you can use it if you don't change it, re-test the hard disk, I hope it can be used for a longer time. I took the hard drive with bad sectors to bt, and I don't feel sorry if it's broken anyway.

    If it doesn't work, just change the graphics card and take a look.

  6. Anonymous users2024-02-03

    It's definitely a problem with the motherboard.

  7. Anonymous users2024-02-02

    Apparently the operating system collapsed.

    Let's reload.

  8. Anonymous users2024-02-01

    1. This is a host problem, also known as not lighting up.

    2. The main reason lies in the hardware, such as: poor contact, memory, graphics card, motherboard and other problems.

    3. Solution:

    A: Disassemble the side panel of the chassis and reseat the memory, graphics card, hard disk data cable, power cable, and 20P power supply cable.

    b: If the machine still doesn't light up, for example, wipe the gold finger of the memory, insert it into another slot, and then turn it on.

    c: Troubleshoot the hardware by unplugging and replacing the memory and graphics card, and then replace it.

Related questions
13 answers2024-04-18

Do you want to ask how to solve the problem that the computer screen is not lit? >>>More

8 answers2024-04-18

There is no sound, most likely the sound card is faulty (maybe the speaker, maybe the audio cable). 2. The failure of the sound card is often a soft fault. 3. Solution: >>>More

6 answers2024-04-18

The reasons why the C drive is inexplicably full are as follows:1. Viruses and malware may continue to generate junk files to the C drive. >>>More

12 answers2024-04-18

First, check if the headlight bulb is short-circuited. If the bulb is normal, check the fuse and control line switch. >>>More

5 answers2024-04-18

1. Lay the pants flat on the ironing board. Place the pants flat on the ironing board first, and if they are steam-mounted ironing, use a trouser clip to clip the pants and hang them on the steam rack. No matter which one you use, you must expose the whitened position of the pants, and then proceed to the next one. >>>More