The big brothers in the machinery industry give the little brothers some pointers

I'm a mechanical engineer, in fact, after reading what you wrote, I really don't understand the little brothers who are usually in the workshop, one by one less than 20 years old in the workshop, all over the body are covered with oil, look at their usual smiles, I haven't thought of these ideas.

As I personally, you have a master is a little better, but what can be out, I don't have other meaning, because of the current manufacturing enterprise promotion system, only the former pioneers of the enterprise can be in the leadership position, as an operator in his 20s It is difficult to have a chance to be promoted, if I am you, I think you should change jobs, after all, you have a long way to go, go out to have a look, or change the line, I heard that Guangzhou is not very good at learning CNC,

If you like it, if you have expertise, if you have confidence, you should do it! I'm not in this business, but I have a passion for it.

Are you sure to make a lot of money? The so-called champion in the line depends on where your talent is.

There are many factors that restrict employment: economy, energy, physical strength, and experience. You have to adapt to the person.

Then you should have changed, now it is said that CNC is very good, but who has found a good job.

Now I still advise you to change the hand, it is better to have an apprentice, although the apprentice is not very good now, but you should also think about yourself.

If your situation is good for me, my family is not too eager to ask me to make money now, I just want to learn some skills first, it doesn't matter if I have more money or less money.

Let's not talk about two-dimensional software. In fact, the principle of 3D software is basically the same, such as solidworks, proe, ug, etc., but there is a slight gap in grade. SolidWorks is relatively simple, but the basic 3D modeling is still sufficient, and the engineering drawings are also very convenient.

On the other hand, PROE and UG are more advanced, mainly reflected in curved surface modeling, sheet metal design and NC machining. Since you want to simulate machining, I suggest you still learn ug, which has relatively strong simulation processing ability. When you learn ug, other 3D software will be universal, and the principles are basically the same.

Hope it helps you a little!

Much the same, practicality is king, that is, what you use in your work, you learn.

3D software recommends SOLIDWORKS, which is easier to get started, and then learn other software after getting started, which is similar.

1.About work.

I used to work for a decoration company, and the designers in it were not unpromising as your friend said, they were very well paid. But at the same time, income is only related to the efforts and abilities of the individual. As long as your work is recognized by customers, it will earn you a sense of accomplishment.

However, there is a big income gap in this industry, and there are many people with a monthly income of several hundred, which all depend on personal dedication and inner cultivation.

Therefore, a person who says that there is no future in any line is a fool himself.

2.It's about character.

If you don't have confidence in your profession – what you do best, how can you be confident in yourself?

Find something you are familiar with, medium difficulty, after doing it successfully, you will appreciate yourself more and more, feel that you are really good, and your self-confidence will be built up little by little. That way, you won't be shy when talking to people.

You haven't graduated yet, you have no social experience, it's normal to be shy, and the beauty of youth is in youthfulness, so there's no need to be distressed, just go with the flow, and you'll miss this kind of time when you're sophisticated.

But people always have to grow up, to be exposed to society, to complex things, even to things you don't like. Adjust yourself slowly, don't rush it, and set the right mindset. Most of the time, we feel that we can't do it, because we want too much of ourselves, trying to complete a big task in a very short time, of course, we will have frustration, and then we will not be confident.

In addition to working hard, everyone has to wait. Wait for maturity and wait for the natural outcome.

3.About girls.

Your character is weak and gentle. However, there is more than elegance, but not enough toughness. Boys don't do bad things, it's not something to be attractive, it's not a good thing. On the contrary, boys who do bad things every day are occasionally more favored by girls because they live more self-consciously.

Don't prematurely position yourself as a taciturn, shy person. Think like this all the time, and even if you're not, you'll become like this. Communicate with people, talk to different girls, and try slowly, and there will be unexpected results.

Hope it helps, good luck

Isn't it a man? How can there be a girl who is born to like it, if you meet someone you like (whether it is by accident or a long-time crush), chase it! Something slipped away when you hesitated.

This is the manifestation of lack of self-confidence, you must first build self-confidence, talk to people more or be a good listener, put aside embarrassment or something, laugh more and someone will be close to you, participate in more activities, anything, exercise yourself, the most important thing is not to care too much about other people's eyes and opinions, so that you can let go of everything, gradually build self-confidence, everyone wants to be friends with cheerful people, I believe you are the same, occasionally think about yourself is not even afraid of death and are afraid to talk to people, come on!!

At the beginning of everyone's career, they are doing chores, doing these service jobs, and when the selection of knives is not done well, they may often be blamed and complained by the master, which are some normal phenomena.

There is no future in sight, who can come out and say that there is a future when you get a job, and for a person who does not have any work experience. It is even more impossible, as an enterprise, whether it is a private enterprise or a state-owned enterprise, there are certain standards for selecting and employing people. Unless it's your own factory.

Just graduated, to be able to enter a state-owned enterprise, compared with other people's start, is already a step higher. Make good use of the opportunity, work a little more every day, go to work a little earlier, get off work a little later, say hello a little more, be broad-minded, complain less, be modest and cautious, and be sincere in learning from teachers and ......In fact, it is the little thing that can make you different and stand out.

Remember, to find a good master, you must be sincere, you must impress him with your work performance, and the New Year's etiquette must be in place, and within a few years, you will definitely have achievements in this industry. In the machinery industry, generally do not have ten or eight years of work experience, people will say that you are a novice, I hope you grow several times faster than others through your own efforts, work hard, young people ......

9800gtx>8800gtx/ultra>9800gt>8800gts/gt>9600gt>9600gso>8600gts>9500gt=8600gt>9400gt=8500gt

9300GT 8400GT gs is too rubbish I don't say it, 8500gt 9400gt*2=8600gt8600gt*2=9600gt

9600gt * less than) = 9800gt

The 4830 is about the same as the 9800gt.

4850 spell 9800gtx

It's not that higher the number, the better.

See the following,I'm this sofa, I don't want it, I have to say it, 1440*900 fully open RA3 9600GSO no suspense (G92), even if it's a 22-inch 9600GT, it's enough to deal with at most9800gtgtx260+, it's not necessary at all.

This game doesn't eat at all u ordinary dual-core can handle (unless you like to go heads-up n cold) This game uses the command and conquer: general's engine, and the configuration is not so terrifying.

The cost performance of A card has always been higher than that of N card. 4830 = 98gt But there is a gap on ** What 85 95 is all garbage graphics cards 95 is 86 changed to a vest to mix it up It's completely fooling people 8 series Don't buy it under 86 Don't buy it under 96 series 96 Don't buy it below 96 That's what it's all about.

You can consider the 9800GT or HD4830 or something like that, which is about 700 yuan.

At 1440x900 resolution, it's no problem to open full effects.

It's hard to say what the future of jobs will look like. Therefore, choosing a major is mostly a matter of luck. I recommend majoring in liberal arts.

I don't think science majors will be too prosperous in the next few years. And the competition is fierce. The general direction is this.

It's up to you to choose.

Let's choose the major you are interested in

Belch? I heard that mining is very good, and I have to do it in the large mineral bureaus.

Your current business is facing the auto parts of high-end cars, if you do it yourself in the future, it is recommended to develop to car beauty, because the owners of these three cars are generally repaired and maintained in the 4S shop, so the accessories let the 4S shop occupy a large piece, but the car beauty is different, everyone is the same starting line, and the owners of high-end cars are willing to spend money in this regard, so you can open a professional car beauty shop, mainly beauty decoration, Vehicle modifications and accessories are available! Then you can also find a 4S shop to negotiate the outsourcing business of new car decoration and beauty, and you will share it with the 4S store in proportion, which is also a business development direction.

BMW's main profit is not in the whole vehicle, but in the after-sales sector accounts for a large proportion, and the after-sales of cars like this is also more expensive. so...

BMW has more options to make money.

It's okay to have scars, you can't be a pilot, and it's pretty much the same as a soldier.