The Samsung note3 charger fell into the water, can it still be used? Remorseful, ask for advice

Hello: According to your description, it is recommended that you do not make any more attempts to boot the phone after it has been drained, and remove the battery.

Because mobile phones are electronic products. If the inside of the mobile phone is flooded, although the external water traces are wiped dry, there are impurities in the water, and the impurities will be adsorbed in the mobile phone motherboard and display components, and if they are not removed for a long time, they will be damaged by the components. If you blindly start the machine before cleaning and maintenance, it is easy to cause a short circuit in the components, causing unnecessary losses and dangers.

If you throw the charger into the water, do not plug it into a power socket, and it is best to place it in a ventilated location and wait for the charger to dry completely before turning on the power.

If possible, you can take apart the charger and take a look, wipe the water inside, and remove the dirt between the chip pins.

Don't charge it now, you put it in the rice and bury it for about a day, because the rice absorbs water, and then you can charge it when the water inside dries.

You can use a power bank and other others to try first, as long as it can be charged, it is generally fine.

You can't use it, otherwise be careful**!

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine. It is recommended that you bring the machine to the local after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

There are two ways to inquire about phone repairs**:

Way 1Log in to the official website to inquire about the reference benchmark for maintenance costs outside the warranty period and the reference for spare parts**.

Method 2: Consult the service center to understand the repair cost: send the mobile phone to the nearest service center, and the engineer will determine the specific maintenance of the machine according to the product test results**.

1. After the mobile phone enters the water, cut off the power immediately, and do not turn it on for use.

2. Shake dry vigorously to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

5. If it is dropped into corrosive liquid (such as toilet, seawater, etc.), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

6. Disassemble the machine as soon as possible and clean it with alcohol or professional washing water. If you can't disassemble the machine yourself, it is recommended to send it to a repair shop.

Don't turn it on, take out the battery, blow it with a hair dryer, turn up the temperature a little higher, bake it, put the phone next to the window, and try to turn it on after three or four days.

Remove the battery and repair it immediately.

If it's all watered, don't you take it to the mobile phone store to let the master fix it?

Shutdown, folding battery, water removal, after-sales service.

Hello dear Samsung users:

The battery was broken by the blisters and could no longer be recharged. Go to the branch and ask for a repair.

Of course it's broken, if it falls into the water, it should be taken out immediately and dried with a blow dryer, if not, it should also be dried in the sun or in a hot place, otherwise it will be bad, and this is how I used to be broken.

**Inside the original.

After a time of water soaking mold, resulting in some of the original is not powered Go to the maintenance department to let them disassemble and clean up Basically, it will be no problem This should be done as soon as possible The longer the time, the more difficult it is to deal with Although it can be used at the time, but**The small water droplets remaining inside are not visible to us So**After entering the water, try to go to the after-sales service to clean it up as the best If it is helpful to you, please adopt.

It may be that the charging circuit burned.

Do not turn on the machine, wait for it to dry before turning it on.

Mine too, the hardware inside is rusty.

Try changing the charger, maybe the charger is broken...Check the charger port for any debris blockage....Clean it up and try....

Use a hair dryer to blow hot air in, but pay attention to the time.

Change the battery, or buy a charger and take out the battery inside to charge it.

Hello dear Samsung users:

According to your description, [after the phone is liquidated, it is recommended that you do not want to try to turn it on again and remove the battery] because the phone is an electronic product. If the rotten jujube inside the mobile phone is lifted into the liquid, although the external water traces are wiped dry, there are impurities in the water, and the impurities will be adsorbed in the mobile phone motherboard and display components, and if they are not removed for a long time, they will be damaged by the components. If you blindly start the machine before cleaning and maintenance, it is easy to cause a short circuit of the components, causing unnecessary losses and dangers.

It is recommended to send the phone to the nearest Samsung service center for testing and repair as soon as possible.