My computer shuts down normally and turns off the power, and it has to detect 10 when it is turned o

You're talking about self-testing, and testing is definitely going to be tested!

The computer's disk scanner is mainly to scan the disk error caused by the loss of file fragments and cross-linked files, if you are in the normal shutdown and the disk fragments are not much in the case of the above phenomenon every time, it is very likely that the hard disk has a bad sector, so it is likely that the disk scanner is called every time you boot up, it is recommended to use a special tool to detect the status of the hard disk, if the hard disk has a logical bad sector, it should be repaired or screened in time, if it is a physical bad sector and very serious, important data should be transferred and sent for repair. Of course, you can also ignore these errors and turn off the disk scanner at boot by typing "chkntfs x drive name (e.g. c:) in the command prompt program, and the command to restore the default value is chkntfs d."

Note: The x-parameter cannot be used cumulatively. If you type the option more than once, the most recently typed item replaces the previously typed item.

If you want to ignore multiple partitions, you can use chkntfs x e f g h

See if your antivirus software has set up auto-detection. In addition, if the computer is not completely turned off, you turn off the power and it may also be detected. And then after the last illegal shutdown, when he tested it, he didn't finish the test and entered the win.

There are many kinds of detection, some are the items that must be detected when the computer is turned on, and there are illegal shutdowns after the system detects the error file, and there is the motherboard BIOS system to detect hardware information, if the BIOS battery is out of power, every time the battery is turned on to detect one side, change the battery to solve the problem. And what your test is like is not clear, how to call me the door.

It has something to do with some of your software settings. Or that there is something wrong with your hard drive, it is recommended that you check your hard drive. Or try it with a different motherboard battery. See if some of the hardware is normal.

That's a setup issue! So is my computer!

1.If the system is W2000! That right-click [My Computer] - Advanced - Boot & Failback. Try it, it doesn't have to work!

I'm also a [rookie]! Learn from others.

Is it blos self-test, or chkdiskIf it's the former, that's fine.

1.In most cases, the virus Trojan causes the computer to fail to shut down normally, and the more typical virus is the kidnapping Trojan, which is a new type of highly destructive Trojan, which is different from the traditional virus, it is by kidnapping the system file registration letter to achieve boot start, resulting in the computer shutdown button is missing.

Corrupted sound files cause the device to fail to shut down.

Incorrect settings will cause the computer to fail to shut down properly.

4.The Advanced Power Management (APM) feature on your computer can also cause shutdown, freeze, or black screen issues.

The computer won't shut down, what should I do if the computer can't turn off?

One. The computer was damaged by a Trojan virus, and the registry information was maliciously altered. The solution is as follows:

Step 1: Enter the main interface of the antivirus software and enter [Trojan].

Step 2 After installation, click on "Kill Trojan" to use the full scan function.

Two. The following describes how to fix the problem caused by a user mistakenly modifying the computer shutdown configuration file.

1.Start "Run", enter "regedit" in the "Run" dialog box, click "OK" to find the following: hkey-local- machine software Microsoft Windows CurrentVersion Policies, click on the "System" folder, and then double-click the "ShutdownWithoutLogon" item on the right.

2., "Start" "Run", enter "Run" in the "Run" dialog box, and then click the "OK" button. In the Group Policy window, double-click Administrative Templates, Taskbar, and Start Menu, and then double-click the Remove and block access Shutdown command on the right.

In the "Remove and Block Access to 'Shutdown' Command Properties Slide Vertical" window, click on the "Set Zheng Annihilation" tab, select "Disabled", and then click the "OK" button.

Three. The first thing you can do is determine if the "Quit Windows" sound file is corrupted - open the "Control Panel", open "Sound" and cancel the "Quit Windows" sound. If Windows shuts down normally, the problem is caused by quitting the sound file, and you can fix this by restoring the sound file from a backup or by reinstalling the program that provided the sound file, or by defining "quit Windows" as silent.

Four. When you boot up the computer, you can enter the CMOS settings page, focusing on checking whether the CPU external frequency, power management, virus detection, IRQ interrupt opening and closing, disk boot sequence and other options are set correctly. You can refer to your motherboard's manual for specific settings, which has very detailed settings instructions, if you really don't know about its settings, it is recommended that you directly restore the factory default settings.

1.Generally speaking, the reason why the computer cannot shut down normally is because the computer has invaded a virus, and the more typical virus is the kidnapping Trojan horse, which is a very destructive Trojan horse. It is by hijacking the registry of system files to cause the computer to not shut down properly.

This solution is also relatively simple, as long as you ** an antivirus software, then open this software, select the Trojan after opening, and then click Repair, and wait for the repair to be completed.

2.The power cannot be shut down, or it may be due to the damage of the sound file of the computer, and the sound file cannot be shut down normally after the sound file is damaged. If the sound file is damaged, you can only go to the Internet to re-**file,Generally, it is best to be in the anti-virus software**,This will be relatively safe,**After the installation is successful,The computer can be shut down normally。

3.Another possibility is that the CMOS is not set up correctly. The specific solution is to check the CMOS setting interface when the computer starts, and the key checks are CPU external frequency, power management, and virus detection.

Also check the boot order of the disk. The specific detection method can be based on the instructions of the motherboard, which has a very detailed description. If you don't know much about the settings, then you can use a factory reset to help solve the problem.

4.Problems with advanced power management features can also cause your computer to fail to shut down. In this case, our solution is to open the device manager, and then open the system embedded device in the middle of the device manager.

Unstart power management in Advanced Power Management. If the computer can be shut down normally, then the question of asking the silver eggplant has been solved.