iTouch doesn t even respond to the computer

Updated on number 2024-04-28
8 answers
  1. Anonymous users2024-02-08

    The computer in the Internet café cannot be connected, and the iPhone itouch I have also tried in many Internet cafes, but it cannot be connected.

    It should be the Internet café's driver or firewall that makes the iPhone unable to connect.

    I suggest you go to the network manager and ask him to help you set up your computer.

    Or you do it yourself.

    Press the shortcut key C+A+(Turn on program management) I abbreviate.

    Then press the letter d (because the first letter of the driver firewall program is d) and press alt+f when the driver firewall appears

    At this time, the pop-up is over.

    Then press enter.

    This will put an end to driving the firewall.

    You can also connect your iPhone.

    Some Internet cafes can't really turn off the firewall.

    Note: The above method must be fast, if it is not closed, please try from the computer until the driver firewall is turned off.

  2. Anonymous users2024-02-07

    If you use iTunes to transfer files to Touch, a computer can only sync to one Touch, which is a limit set by Apple to prevent piracy. So if you use the computer of the Internet café to transfer files to the touch, the computer's iTunes will erase all the original files in your touch, and then synchronize the new files, so fortunately your touch connection to the computer does not respond In fact, this is likely to be a problem with the Internet café computer, and your touch has little to do with it, you can change the computer you usually use to transfer files to touch I recommend you a synchronization software: 91 mobile phone assistant This software can freely manage all the files in the touch, and you can also directly ** play, very convenient, and there are no computer restrictions, it can also be used in Internet cafes, I wish you success

  3. Anonymous users2024-02-06

    Without restarting,,= lets you select "No" from it, then click on start, select "Sign out" and that's it.

  4. Anonymous users2024-02-05

    First of all, check your own cable, because the cable is the only medium to connect with the PC, if the data cable is damaged, there will be no good way. In addition, for the situation that you can link well the day before and suddenly can't recognize it the next day, it may be a big problem.

    The second point, think about whether you have disabled some boot items, if the computer installs some software such as assistants, it will remind you to turn off some boot startup services, and these happen to be needed for Apple devices to start, such as opening an assistant, you find that these two items are disabled, please open them quickly, and the problem will be solved immediately.

    If you don't have an assistant installed, then we can find it in the service, specifically in the control panel - management tools - services, see these two startup items, if it is disabled, please start it quickly.

    Update or install the driver. It is possible that you have uninstalled the driver of your Apple device due to your negligence, and you should look at the driver at this time. Specifically, in my computer right-click - management (g) - device manager - universal serial bus control, if your apple device and computer are connected, there will be a serial control item at the beginning of apple, right-click to update the driver device, select the path (provided that **good apple's online driver, the official website has**, search for it), after the update is completed, it should be linkable.

    Update the software, sometimes iTunes or ifunbox will not be able to recognize the Apple device due to version problems, so updating the software may solve the problem, but this situation is not very likely, because if the software needs to be updated, you will be prompted to update, and in general, the two software with similar versions will unconditionally support the device.

  5. Anonymous users2024-02-04

    I've also encountered this situation, just remove iTunes and reinstall it.

  6. Anonymous users2024-02-03

    Try reinstalling the driver.

  7. Anonymous users2024-02-02

    You take it to the store, and the clerk can help you get it.

  8. Anonymous users2024-02-01

    1. When charging, the power inside will not change once after a long time, and it is not dynamic.

    2. It may be that the electricity is insufficient, and the charging power is not rushed in.

    3. Your situation is similar to that of bricks, if you still can't use the following methods, repair it.

    1. Shut down. If it doesn't turn off in the normal way, press and hold the Sleep Wake button and the Home button until it turns off (it may take up to 10 seconds).

    Second, let it enter "recovery mode".

    1.Press and hold the Sleep Wake button and the Home button until the device is turned on.

    2.Once the apple mark appears, let go of the Sleep Wake button and continue to hold down the Home button.

    3.Wait more than 30 seconds.

    4.After the appearance of the ** connected to iTunes, you can let go, and now your iPod has entered "recovery mode".

    This process may require several attempts to succeed. If you're unlucky enough to let go of a key at the wrong time, you'll have to turn off your iPod and start all over again.

    When the iPod enters "Recovery Mode", it can be restored with iTunes.

Related questions
8 answers2024-04-28

Is it a new machine or was it once in working order? If it is a new installation, see if your jumper has jumped wrong, if it has been used normally before, now it is not possible, it is recommended that the system is the smallest method, unplug all the wiring, except for the power supply connected to the motherboard, unplug everything such as the memory graphics card, as long as the motherboard and CPU, and then short the switch, see if there is a response. If not, the motherboard will be scrapped.

7 answers2024-04-28

Friends who often use computers should encounter this situation, after pressing the power button when turning on, the computer does not respond, and the monitor does not light up. Remove those foolish fault causes, such as the power supply of the monitor and host is not plugged in properly; In addition to the signal interface between the monitor and the motherboard, the common fault causes are as follows. >>>More

20 answers2024-04-28

Dude, how long has it been since you reinstalled the system? >>>More

8 answers2024-04-28

24 Don't think about it, your plug-in board must be broken, the power supply is not short, you will turn it off. There is a high chance that the plug-in board will be short-circuited and eventually broken.

5 answers2024-04-28

If the keyboard does not respond, you can solve it by: connect the keyboard to the interface of the computer, update the driver, find suspicious processes, and restore the driver, which is detailed as follows: >>>More