What speaker does Tianyi PA 6L come with?

Winner Hi-Fi Power Amplifier PA-6L is a professional karaoke power amplifier, its basic parameters are as follows:

Line output impedance: 1k

**Pitch Adjustment Range: Treble: 10kHz 10 dB; Bass: 100Hz 10 dB

Power supply voltage: 220V 50Hz 2Hz

Microphone gain: >65 dB

Output power: 2 340W(4 ); 2 200W (8) Signal-to-noise ratio >95dB A-weighted (microphone volume minimum) Echo intensity: greater than 10 times (-60 dB).

Harmonic Distortion <

Frequency response: 20Hz 48kHz (+1 -3 dB) Input impedance:

Microphone: 600 (unbalanced); **: 10k (unbalanced) microphone pitch adjustment range:

Treble: 10kHz 10 dB

Midrange: 500Hz 10 dB

Bass: 100Hz 10 dB

**Channel Gain:

Line out: >8 dB; Power amplifier output: >42db size 485 (wide) 380 (deep) 150 (high) mm according to the output power and impedance of the machine, if the input impedance is 4 ohms karaoke speaker, choose about 240w, if you choose 8 ohm box, the power can be about 150w.

As long as you find a match, you can match each other.

If you forget, and you are using QQ email as your login username, you can find the login button on the home page, generally next to it or after selecting it, you can see the link of forgetting the password, click forgot password, in the new pop-up web window through the login registered email to retrieve the password, enter your QQ email address and verification code, click to send verification email, generally wait for a while, you will see the verification email or reset password link in your mailbox.

It is necessary to carry out the development and adaptation of different layouts and styles. These styles are available when the pile ** is generated through Android Studio, and you should pay more attention to it when developing. Enterprise developers tend to take care of these things. -

The people in us are Jianghu Avenue.

Idle at home! There is indeed a person who has said these feelings, especially those who have lived here, at this time.

Tianyi AD-68 is a 2*80W(8R) integrated power amplifier, suitable for speakers are:

Huiwei M1, about 4500;

Jamo Zunbao C603, ca. 2600;

jbl e30。

If you like the floor box, the Zunbao C605 is good.

It is recommended to go to VTeam's forum to register and consult. The price of the speaker also needs to be proposed, and others are good to give suggestions.

This amplifier is pure Class A, with an output of 150W*2 8 ohm rated power.

It can be equipped with 100-150W speakers.

If it is a Class B power amplifier, 150W can only be equipped with 70-100W speakers.

However, the distortion of the Class A power amplifier is very small, which is equivalent to the 300W power of the Class B power amplifier.

The power amplifier dubbing cabinet is a sign, mainly looking at the absolute power, not the brand.

Thousands of mountains and birds fly away, and thousands of people disappear.

This amplifier is pure Class A, with an output of 150W*2 8 ohm rated power.

It can be equipped with 100-150W speakers.

If it is a Class B power amplifier, 150W can only be equipped with 70-100W speakers.

However, the distortion of the Class A amplifier is very small, which is equivalent to the 300W power of the Class B amplifier.

Power amplifier speaker, mainly look at the power, not the brand.

This combination is not reasonable, the amplifier is weak, and the potential cannot be fully realized. It is recommended to replace the amplifier.

Now I tentatively plan to use the Marantz PM-15S2 amplifier. However, I don't know what the timbre of this amplifier is like, whether it is relatively bright or dull. Thanks to the Tianyi 86SE amplifier, it made me love the bright tone (I only listened to it for twenty days) and I couldn't accept the dull tone of the Class B amplifier.

I have two Class B amplifiers, one is Tianyi AD-66A, the sound is thick and soft, but the sound is dull (the resolution is also poor), I am not used to listening; The other is the Tianlong PMA-1315RG power amplifier, the sound is also dim, and it is not as thick as the Tianyi 66A. Tianyi 86SE and Marantz 15S2 CD player, the sound is too bright, a little harsh, however, after a few days of CD player use, with 86SE, it no longer feels too harsh, a lot softer, but the warm, sweet feeling is still a little worse. What needs to be solved now is this problem, what kind of amplifier can be used to make the overall listening feeling warmer and sweeter (my speaker has a neutral timbre, even if you change a signal cable, you can immediately feel the change in timbre, let alone change the amplifier.)

The speaker is fine, the overall timbre will be mainly determined by the amplifier).

Pioneers, Marantz are very good.