What should I do if the MIX fails to turn on in the three screen mold of the Mi fork?

Hello,Xiaomi Mi X3 screen appears MIX,Can't turn on,It's also caused by its system failure,You can turn off the phone again,Start it again,Restore factory settings,So that you can reset some of the passwords you applied,It's all caused by conflicts。

Xiaomi won't turn on, you need to do a factory reset through the computer assistant, or force a factory reset through the shutdown button and the home screen button.

If the screen of the mobile phone does not light up, you can use the following methods to troubleshoot:

1. If the screen is black in the call state (long press the power button to force restart the boot), enter the hardware detection mode and calibrate the distance sensor after restarting;

2. Try plugging in the charging cable to see if the breathing light is on

a. If the breathing light is on, you can try to press and hold the power button for more than 10s to force restart the phone to see if the display is normal, this situation is an accidental phenomenon, it is due to the abnormal program when performing some program operations, it is recommended that the user back up the data and restore the factory settings, without restoring the backup to see if the phone is normal; After the phone is restarted and the factory settings are restored (the backup is not restored), the phone will still have a black screen, it is recommended to try after line swiping;

b. If the breathing light is not lit and the phone does not respond if you press and hold the power button for more than 10s, it is recommended to bring the mobile phone to the Xiaomi authorized service center for testing.

The handling suggestions are as follows:

1. If the motherboard of the mobile phone is damaged, the motherboard should be replaced.

2. If the mobile phone is running out of memory, you should clean up the memory space.

3. If the system is incompatible, the system should be reinstalled.

4. If there is a problem with the hardware of the mobile phone, it is recommended to replace the mobile phone.

5. You can also go to the mobile phone after-sales store for maintenance.

There are several reasons why the Xiaomi Mi MIX keeps being on the boot screen.

1. The mobile phone system is not compatible with the mobile phone.

2. The motherboard of the mobile phone is faulty or damaged.

3. The memory space of the mobile phone is not sufficient.

4. There is a problem or damage to the hardware system of the mobile phone.

5. There is a virus in the mobile phone or the boot system is lost.

It may be Kabai rice, if it is Kabai rice, you can only brush the machine.

The handling suggestions are as follows:

1. If the motherboard of the mobile phone is damaged, the motherboard should be replaced.

2. If the mobile phone is running out of memory, you should clean up the memory space.

3. If the system is incompatible, the system should be reinstalled.

4. If there is a problem with the hardware of the mobile phone, it is recommended to replace the mobile phone.

5. You can also go to the mobile phone after-sales store for maintenance.

There are several reasons why the Xiaomi Mi MIX keeps being on the boot screen.

1. The mobile phone system is not compatible with the mobile phone.

2. The motherboard of the mobile phone is faulty or damaged.

3. The memory space of the mobile phone is not sufficient.

4. There is a problem or damage to the hardware system of the mobile phone.

5. There is a virus in the mobile phone or the boot system is lost.

c.When everything is ready, please follow the brushing tutorial on the official website to use the sixth type of line brush, which is the official flashing tutorial.

You can flash the machine to solve it, go to the repair forum Huahai mobile phone repair forum to find a tutorial to solve it, or ask questions on it and communicate with K friends how to save bricks.

Force Restart: Press and hold the Power and Home buttons at the same time for a few seconds, and the phone screen will automatically restart when you let go.

Two after half an hour of charging:

Turn off the phone completely, press the power button + volume (+) button, if it doesn't respond, press the "power button + volume (+) home button (bottom middle of the screen)".

When the recovery interface (i.e. the English menu) appears, let go

Press the volume key to move to "Wipe Data Factory Reset" > Press the power button to confirm

Then locate to "yes delete all user data" through the volume button, then press the power to confirm, move the volume up and down, and select the wipe cache partition boot button to confirm (the third party also has a yes option, the same operation as the fourth step) will automatically return to the page just now after clearing.

Wait for the phone operation to complete" cursor will automatically select "reboot system now".

Press the power button to restart your phone.

If you encounter a situation where your laptop won't turn on, you can:

1. Press the power button to see if the power indicator lights up, if not, please plug in the original charger and tap the power button again. If the power indicator is still not lit and the screen is not responding, please try to press and hold the power button for 15s and try again, if it is still invalid, you can conduct after-sales testing;

2. Please check whether the indicator light is on, if there is no response after the screen appears MI 燇ogo, please tap F2 to enter the BIOS to restore the factory default settings, if the screen does not have any response, please press and hold the power button to force it to shut down and try to boot it again;

3. After the BIOS restores the factory default settings, the boot prompts Windows error and other related information, you can go to Windows Flash to reset the system;

4.If none of the above methods are effective, you can apply for after-sales testing and processing.

Isn't it very common not to turn on?,The solutions are almost fixed 1.Detect whether you can enter recovery, you can enter third-party recovery and flash the machine directly in recovery mode.

2.If you can't enter recovery, can you flash recovery, can you flash third-party recovery, then flash into third-party recovery, and then follow step 1 to continue.

3.Can't flash recovery, find the way to flash the official firmware4Directly link to Qitu brush machine, use the line brush to save bricks function and brush back to the official system with one click5

If the above four methods are not successful, it is recommended to go to the after-sales service or a professional mobile phone repair store for repair.