ios10 recovery slide to unlock, ios11 how to slide to unlock

Because the sliding screen is canceled to enter the password to unlock, for mobile phones with fingerprint recognition, you can directly use fingerprint recognition, but for iPhone 5 and iPad 4 without fingerprint recognition, you can manually turn off this function, or open the "small white dot" in the auxiliary function, and click the small white dot to call out the interface of password unlocking.

You can also unlock the passcode in the following ways: open the assistivetouch in the accessibility function (commonly known as the little white dot) and click to call out; Swipe right to open the plug-in bar, click on the weather or other plug-ins to appear the password input interface; Swipe left to see all the outgoing calls.

How to unlock iOS10 without pressing the home button?

In the case of enabling fingerprint unlocking, in addition to the above methods, you can also use your finger to press the home button to call out the password unlock interface. There is no doubt that the most convenient way to unlock under iOS 10 is fingerprint unlocking, and users can continue to use the button by pressing the bright screen to unlock by turning on "Settings - Accessibility - Home Button - Touch On".

For Apple devices equipped with A9 and A10 processors, you can quickly light up the screen by turning on the "Lift to Wake" in "Display and Brightness" at the same time, and with the "Touch Open" function, you can unlock the screen with a light touch, without pressing the Home button, which can also increase the life of the Home button.

Slide to unlock in iOS 10 has been canceled, and there is no option to restore. But isn't it unlocked by pressing the home button? You can also go to Settings - General - Accessibility - Home button, turn on "Touch to open", so that you can unlock it when you touch the home button, which is much more convenient than sliding to unlock.

The side switch can be used to turn the screen rotation on or off, but the function of the side switch must be set beforehand, and the side switch has two functions: lock screen rotation and mute.

We want to set the function of the side switch to "lock screen rotation". Open the "Settings" interface in the device to disassemble the bridge, and then locate to the "General" interface, as shown in the figure. In the general interface, under "Side Switch For", click and select "Lock Screen Rotation".

One way to get "Slide Unlock" back in iOS 10, there is no setting toggle, instead, you need to take an encrypted iPhone backup in iTunes.

Replace by pressing Home to open with swipe to unlock in iOS 11 assuming you have taken an unencrypted backup of your iPhone and have ** and installed iBackupBot.

The details are as follows: Step 1: Launch iBackupBot.

Step 2: Select your backup.

Step 3: Go to System Files >> >> >> >> >> >> >> >> >> >> >> >> >> >>

<> Step 5: After adding the following attributes to the header and saving the file, exit iBackupBot and restore the same backup from iTunes to your iPhone iOS 10 installation.

First, find Settings

How to set up iOS10 to unlock without pressing the home button.

2. Open [General] under [Settings].

How to set up iOS10 to unlock without pressing the home button.

3. Then find Accessibility

How to set up iOS10 to unlock without pressing the home button.

4. You can see that there is a [Home Button] under [Accessibility], how to set ios10, and unlock it without pressing the Home button.

5. Under the Home button, there is a Touch to Open

How to set up iOS10 to unlock without pressing the home button.

6. Touch [Open] to unlock it directly with Touch ID without pressing the Home button of your iPhone.

How to set up iOS10 to unlock without pressing the home button.

iPhone6 can't be swiped to unlock after upgrading to iOS10, because the iOS 10 version of the Apple phone has been replaced by (press the home button to turn on), so it can't be sliding to unlock.

iOS10 version, you can't use swipe to unlock anymore.

What should I do if iOS10 can't slide to unlock? In the iOS10 system, you can't use sliding to unlock, there is a more novel unlocking method, but how to use the unlocking method of iOS10, how to use the new system for users who are not used to iOS10, let's take a closer look.

How to unlock iOS10:

Apple has made a lot of changes to the lock screen of iOS 10 this time, for example, when the phone is off, you stand up the phone, and the screen will automatically light up, the reason why the lock screen of iOS 10 has changed very much, is because it operates in a way that is different from iOS 9.

Different from ios 9, the lock screen interface of ios 10 is much richer, first of all, when you swipe left, it is to enter the photo interface, and the drop-down is the notification menu, the pull-up is the control center, and the swipe right is the **control center, the original manual unlock interface, replaced by a variety of small plug-in interfaces.

iOS10 Unlock Method:

If you don't have a lock screen password or fingerprint, you need to press the home button once to light up the screen, and then press the home button again, of course, you can also click on the small dot to unlock it, and if you set a fingerprint password, it's simpler, because it's the same as the previous fingerprint unlock.

This change is still obvious, and everyone has to adapt to it.

How to set up slide to unlock iOS10:

Tools Raw Materials:iphone ios10

Method steps

First of all, on the latest push iOS 10, the lock screen status is lit up by pressing the power button, and then touch the home button with your finger, in fact, the phone has been unlocked, don't believe it, please see the screenshot below:

Although the phone has been unlocked, unlike iOS 9, the phone is still in the unlock interface and has not entered the home screen, and the system is still in a waiting state: the user can go to the home screen by pressing the home button, or click the widget of an app to enter the app, this step is free to choose by the user. The gif** below may be more intuitive, if you don't tap the home button after the screen is on, you won't be able to enter the weather app smoothly.

So the question is, what if you want to go back to the familiar iOS 9 mode? In fact, it is very simple, as long as the following settings are turned on: "Settings - Accessibility - Home Button - Touch to Open", so that you can continue to tap the Home button in the iOS 9 way and directly enter the home screen interface.

In addition, for devices that have upgraded iOS 10 without Touch ID function (such as iPhone 5), what should you do if you want to call out the interface unlocked with a passcode? There are three ways:

1. Open the assistivetouch (commonly known as the small white dot) in the accessibility function, and click to call out;

2. Swipe right to open the plug-in bar, click on the weather or other plug-ins to appear the password input interface;

3. Swipe the camera by left, and then view all ** outgoing calls.

Finally, for devices equipped with A9 and A10 chips (i.e., all iPhones on sale, including iPhone SE, iPhone 6S Plus, iPhone 7 Plus, etc.), the function of picking up the phone to quickly light up the screen can be realized through the "Settings - Display and Brightness - Lift to Wake " setting item (it should be noted that the angle of picking up the iPhone may be slightly larger).

Another tip: if you use the "touch to open" function mentioned above, users can pick up the phone and then tap the home button to directly enter the home screen, without having to press the home button or the power button.

Tools Raw Materials:

iphone

Method steps

1. If you have not set the unlock password or fingerprint, you can press the power button once to light up the screen, and then press the home button to unlock it.

2If you have set a fingerprint password, you can touch the home button with your finger to unlock it.

3. Open the assistivetouch (commonly known as the small white dot) in the accessibility function, and click to call out; Swipe right to open the plug-in bar, click on the weather or other plug-ins to appear the password input interface; Swipe the camera by left and view all the outgoing calls.

4 also through the "Settings - Display & Brightness - Lift to Wake Up" method.

1. iOS10 really can't be unlocked by swiping, and Apple has canceled this feature of unlocking by swiping.

2. It is recommended to turn on the wrist lift wake-up function, so that as long as the finger is gently placed on the home button, it can be unlocked without pressing.

3. The specific setting method is to find [Display and Brightness] in [Settings] and click to open.

4. Find the [Raise your wrist to wake up] option and slide to turn on the function.