How can customers choose the mill that suits their production needs?

According to the yield, fineness, stone hardness, site equipped with the suitable.

In fact, as long as the customer department is stupid can go to the right mill for themselves, some customers, that stupid is really amazing, deserve to be deceived by some bad manufacturers, try to ask how such customers can buy a mill suitable for their own production needs, customers are not stupid, you can choose a suitable mill business, so that you can naturally choose a suitable mill for your own production.

1. If you are buying a household mill, you should pay attention to the fact that the choice of the mill brand is more important, and you can still judge the quality of the reed air mill with the help of the material of the grinder, handle, cover, blade, and capacity. 2. The role of the household mill is indeed quite extensive, especially in life. It can be used to grind soybeans, flour, and food ingredients into powders, such as pulp, for later use.

Soybeans are ground into flour for better brewing, and wolfberries are ground into rice flour, which can be mixed into rice pat paste with boiling water, which is very convenient. 3. When grinding, you still need help cooking soup or stir-frying, and grinding the ingredients a little will make it easier to absorb the flavor. 4. After all, the use of grinding is quite small, and many ingredients can be put into it and ground into dry powder, such as soybeans, peanuts, black beans, lotus seeds, corn, barley, oats, and sesame seeds.

Household mill purchase points: shell material, handle, parts, cover, blade material.

1. Shell material

When we buy an electric powder machine, we are more concerned about the material it uses. In the case that there are more materials that can be used, all-stainless steel is better, because it is cleaner and hygienic, and it is much easier to clean after use. Silver trails.

2. a handle

When using a pulverizer, the handle can be said to be more critical. It's better to be wider, so that we don't get into our hands when we pick it up. When choosing, feel whether it feels comfortable in your hand.

3. Parts

Whether the tightness of the screws on the machine is appropriate, and whether there is any loosening phenomenon. If you can easily remove the screws by hand, you will not be able to use such a machine.

4. a lid

After loading the grains, I found that the lid was not tight, which was more disturbing. In order to prevent this situation from happening, it is recommended that when purchasing, under the guidance of the salesperson, personally test whether the buckle is firm, and whether the buckle will be lifted due to the operation of the fuselage.

5. Blade material

For the case of blade slag dropping, it is necessary to take into account: If we find metal slag on the knife inside the broken food, we will look at the excess and it will not be there. Under normal circumstances, the material of Fengzhou steel is better, and there will be no slag loss, and it is not easy to rust.

The crushing blade should be three pieces, and it is not much stuck in the groove when crushing, and the powder is also thinner after it comes out.

There are many types of mills, mainly including TGM overpressure trapezoidal mill (third generation mill), high-pressure hanging roller mill (second generation mill), Raymond mill (first generation mill), MTW European trapezoidal mill (the most advanced), medium speed micro mill and T130X reinforced ultra-fine mill and vertical mill successfully developed and produced by Dawn Heavy Industry Technology.

The selection of grinding equipment should be selected according to various factors such as processing raw materials, required finished product particle size, output and so on.

The discharge particle size of overpressure trapezoidal mill, high-pressure hanging roller mill, Raymond mill and European plate mill is conventional fineness, 80-325 mesh. The discharge particle size of T130X mill is 325--400 mesh, and the medium-speed micro grinding is 400--2500 mesh, and the discharge particle size can be adjusted freely. The discharge size of Liming Heavy Industry Vertical Mill is 80--400 mesh, which is mainly used for large-scale industrial fine powder processing, such as metallurgy, steel, power and cement industries.

You can choose the best according to your needs, I hope mine can help you, or you can visit for more detailed information.

That kind of mill, grinding something.

In recent years, there are many mill manufacturers, but there are not many that really have scale and quality. Many customers are deceived when buying equipment, so how can you buy a cost-effective mill?

Shanghai Vivo Heavy Industry Machinery ****.

The following points are summarized when buying a mill:

First, before purchasing, you should have an understanding of the actual situation of your own mine, and then go to find relevant equipment information in a targeted manner. It is necessary to choose the right mill according to the characteristics of their own materials: if the hardness is high, the output is large, the mill with a high model should be selected, and the material should be equipped with a dryer if the material is wet.

Second, when choosing a manufacturer, we must compare the quality of the mill of each manufacturer and the after-sales service and the company's reputation when purchasing the mill. You can also consult the relevant equipment manufacturers first. If possible, you can also inspect the mill manufacturer on the spot to have a comprehensive understanding of its scale, strength, reputation and feedback from customers.

Third, it is best to have several sets of wearing parts after purchasing the mill, such as: grinding rings, grinding rollers, shovels, copper sleeves, etc. In this way, even if there is a problem with the equipment in the future production and use process, it can be quickly replaced without affecting the production work.

Fourth, when signing a purchase contract with the manufacturer, before signing the contract, you must carefully read the content of the contract, and the contract should include detailed descriptions of equipment transportation, installation, after-sales and other service terms. It should be supplemented in a timely manner and improved as much as possible, and the contract can only be signed after the two parties confirm that it is correct, so as to avoid unnecessary economic disputes after signing the contract.

Finally, it is particularly important to emphasize the after-sales service: generally provide customers with on-site installation guidance services free of charge, send professional and technical service personnel to participate in unpacking acceptance and guide installation and commissioning until the equipment runs normally, and can provide corresponding technical training services. It should be pointed out that the after-sales service of some companies is too unsatisfactory, so this is also what customers should pay special attention to when purchasing a mill.

Regarding the problems that need to be paid attention to in the daily use of the mill, the main ones are reasonable operation and maintenance, as well as the protective measures against the external environment, which are mainly as follows:

1. Reasonable operation.

Because when the mill is used, the nature of all aspects of the requirements is very strict, which not only refers to the mode of operation, but also includes the nature and speed of the feeding, etc., the way of operation is a matter of detail, mainly refers to how to use the mill, including the order of switching on and off, the setting of speed, etc., and for the nature of feeding, the nature of the materials that different types of mills can handle is different, only the materials that meet the requirements of the equipment can be well realized in the production process, and for the feeding speed, It is a continuous and uniform feeding operation;

2. Maintenance. The significance of maintenance is to reduce the degree of wear and tear of the mill when it is used, reduce the failure in the production of the equipment, help extend its service life, and obtain better production efficiency, and the main operation of maintenance is lubrication, when lubrication, it is necessary to pay attention to the selection of lubricating oil model, and add lubricating oil regularly and quantitatively, of course, it is also necessary to regularly overhaul the equipment, find possible problems in time, and reduce the impact of the failure on the production of the mill;

3. Protection against external environmental influences.

Because when the mill is working, it will be affected by the external environment, such as rust in humid weather, then this phenomenon will accelerate its aging phenomenon, and the high temperature phenomenon will make the heat generated in the production of the machine can not be dissipated in time, and then cause the deformation or fracture of the parts, and then the need for preheating in winter, etc., under different weather conditions, different protective measures are required;

In addition to the three aspects mentioned above, it is also necessary to pay attention to the issue of personal safety, that is, the staff should take personal safety protection measures when operating the mill.

1.Regular cleaning of the mill: the mill will produce residual materials in the working process, so we must carry out regular cleaning work, clean up the mechanical parts inside and outside, and comprehensively inspect the fuselage, grinding rings, grinding rollers, grinding rings, shovels, bearings, etc.

2.Check the screws in each part: loose screws can easily cause equipment loss. However, due to the long-term operation of the machine, the screws in various parts of the fuselage are easy to loosen and fall, in order to ensure the safety of the machine, we need to conduct a comprehensive inspection of the screws of the pulverizer from time to time.

3. Make a daily record of the fault problem: we need to record the usual faults of the mill, and at the same time pay attention to whether the same problem has occurred during each inspection, so as to avoid large problems in the fuselage.

4. Shut down according to the prescribed procedures: The shutdown procedure is very important, which directly affects the life and safety of the equipment. When we shut down the machine, we should stop the feeding first, let the main engine continue to work, so that the residual abrasive continues to grind, about a minute later, then turn off the main engine motor and analyzer motor, stop the grinding work, and finally stop the fan motor, in order to blow off the residual powder.

5. Regular maintenance and maintenance: We must regularly lubricate the spindle, grinding roller shaft, reducer, analysis machine and other components. We select lubricants in accordance with the instructions and regularly replace the necessary parts and wearing parts in accordance with the instructions.