Why is a good jadeite ring worth so much?

Let's take a look at the process of making jadeite ring noodles first:

Although the thing is small, it is intended to illustrate the process, and cui friends should not spray.

1. Ring noodles and small materials.

<>2. Grinding the diamond sand table of the ring surface and the ring surface material on the workbench.

<>3. Shape grinding out by hand.

<>4. Excessive fine sand.

5. Diamond powder polishing.

6. The finished product after polishing.

<> it seems simple?

The process is very simple, the key is to see how to do the material is the difficulty. Take the color of the ring surface and plant it to achieve the best effect, remove faults, and remove impurities. These are the most difficult things to come by, and they are the most difficult.

A 10,000 ring fabric can have a high value if it is done well, and it will lose money if it is not taken well. Generally, if you want to take the ring face, you must first take out the part of the ring face to grind. Then polish to see how to grind, grind off obvious impurities, etc., polish again, look further, and then grind, this is how to grind step by step.

A good ring face costs a day of work from the master, and there is a scarcity of ring fabrics.

The following small materials are also not allowed to be used as ring noodles, because the cotton is too heavy. The ring noodles made will be very flowery. The value is not very high.

<> especially the ring surface, the ring fabric is required to be ground out with the highest hardness and the best quality, so the jade surface has a mirror effect, and the surface light can shine on the portrait and the kind must be enough. The rough stone commonly used to grind the ring surface is usually Houjiangchangkou.

It is completely different from the ring face made of fake and bad materials.

The price of natural jadeite is high in the hardness of jadeite, and the crystalline is delicate. If there are small pores and fish lines, they may be fakes (micropores left by acid bites and desert lines left under wax).

The real high-quality gem-grade ring is as smooth and shiny as a mirror, so that the high-quality jadeite will be brighter and brighter the more you wear it.

Like this article, then share it with your friends

1. Look at the color: especially green, the greener and purer, the higher the value. 2. Look at the transparency and rely on your own experience to determine the transparency of jadeite.

3. Uniform color: There are many jadeite jewelry, often not a single color, 4. Pay attention to flaws 5. Appearance: Most of the jadeite ring surfaces are mostly made into oval egg noodles and round.

Of course, there are also teardrop-shaped, heart-shaped, prismatic, square shapes. In fact, the shape of jadeite also has a great impact on the ** of jadeite. 6. The carving process of jadeite is a process that can give life and soul to jadeite.

The exquisite quality of the ornament craftsmanship of the jadeite carving has played a significant role in the quality of the jadeite products.

Thirdly, a complete set of rings is very rare, because it requires that the rings must be made from the same raw material, so that the material must be large enough. At present, the highest prices in jadeite auctions tend to be large bead chains and large pieces of set jewelry from the same raw material.

Although the jade ring noodles are small and small, they are sold so expensive, which is due to the reasons for oak Xiaochang: 1, not all ring noodles are expensive, in the jade market, bean seeds, glutinous kinds of ordinary color ring noodles, dozens of yuan. 2. Although the ring face is small, the most extreme pursuit of quality, be sure to plant old, water head and foot, and the naked eye does not see cotton.

Therefore, if you often search carefully, a huge piece of rough stone will only open a small ring in the end, and the rest will become waste. The so-called "rare is expensive", and the material used as the ring face must be the best, and the ** of the jade ring face is naturally high. The process of taking the ring face seems simple.

<>1. A good jadeite ring surface is generally old, with high transparency, no carving, uniform and bright color, full shape and high clarity. The jadeite ring face refers to the jadeite center stone that is inlaid with a sleepy smile;

2. The jadeite ring is usually made of a ring face, plus ***, plus broken diamonds, and combined inlay; The quality of the ring face is respectful, requiring high transparency, good clarity, no impurities, and color, which requires bright color and uniform distribution;

3. The quality of the ring directly determines the grade of the finished jadeite ring; Therefore, the proportion of jadeite raw materials on the market that is suitable for making ring noodles, especially high-end ring noodles, is very small.

When many cui friends first come into contact with jadeite, they will have a misunderstanding, thinking that the ring face is a little bigger, much smaller than pendants, bracelets, necklaces or something, and it must be the cheapest of all jadeite jewelry!

Less things are the most precious, jadeite rings come from the most essential place in the original stone, the material is so rare, it is in short supply. A good ring surface has very big requirements for the bottom color worker. Therefore, the ring face of the same size and color is much more expensive than the pendant.

Because the requirements for the ring face are very high, it is basically monochrome in the original stone (colorless or full color, the ring face is not flowered), cracks, white cotton, and black spots belong to the ordinary category in other places.

For a natural ore like jadeite, it is difficult to ask for a monochrome color without mentioning the cultivation of water. The planted ring face will glow with light, which has the effect of similar to the sun's halo, and when the ring face is rotated, there will be a soft halo flooding. For collections, give preference to the glazing ring surface.

All in all, the material that can make the ring face, in addition to being monochrome, must also be planted well, and there is no crack, which is a very demanding requirement, after all, jadeite, as a natural mineral, is always indispensable for cracks, black spots, and cracks. These defects are common on bracelets and pendants, but they are never allowed on the ring!

The requirements of the ring face can be described as "nitpicking".