Why should you renovate your walls and how do you renovate them?

Yes. The old wall must be treated with a wall base before renovation, and all the serious chalking should be removed.

Procedures for refurbishing old walls.

Step 1: Clean the wall.

The old wall must be treated with a wall base before renovation, and all the serious chalking should be removed, and white cement should be used after removal.

Last time. It turns out that the wall is too smooth and has been brushed with paint after being removed to remove the skin that is not firmly bonded, so as to facilitate the bonding of the new paint and the wall.

Step 2: Apply the primer.

The function of wall primer is to resist alkali and moisture, seal the substrate, protect the topcoat, and improve the texture and hiding power of the topcoat. For the renovation of old houses, the wall must be primed, if it is painted directly, the wall will be easy to blister and mold in the future, and it will be easy to change color after a long time in the sun.

Step 3: Extensive repair.

When it comes to repairing painted walls, it is relatively difficult to achieve the desired result. Therefore, it is best to repair the damaged wall as a whole wall or choose a larger area as much as possible for repair, which can not only avoid color difference as much as possible, but also improve the quality after repair.

Step 4: Prevent color aberration.

The color difference of the wall is to be avoided when repairing the wall. For this reason, attention should be paid to the ratio and painting according to the instructions of the paint bucket, and it is best to estimate the dosage. It is important to prepare enough at one time to ensure that the wall color is consistent.

This purely depends on their own requirements for this house or their own needs, sometimes the wall is not black or yellow, it is not good-looking, want to change the wallpaper This is also a situation, the wall is particularly old, but do not consider doing, because you want to rent or demolish This is also a situation, so it depends on your personal needs and the actual economic situation.

Wall renovation refers to the repainting of paint, wallpaper or other materials on the original wall surface of Xinjian to improve the appearance and function of the wall. Here are some steps and considerations for wall renovations:

1.Preparation: Before you start your wall renovation, you need to make thorough preparations. This includes inspecting the condition of the walls, determining the renovation plan, purchasing the required materials and tools, etc.

2.Clean the wall: Before applying paint or wallpaper, the wall needs to be cleaned and sanded to ensure that the wall is smooth and flat, and dust and debris are removed.

3.Primer: Before applying the paint, a primer needs to be applied to the wall to improve the adhesion and anti-fouling properties of the paint.

4.Paint: When choosing a paint, you need to choose the right paint according to the condition and needs of the wall. When applying paint, it is necessary to pay attention to the amount of paint used and the order of use to avoid waste and uneven application.

5.Wallpaper: If you choose to stick wallpaper, you need to paint a layer of base film on the wall to improve the adhesion of the wallpaper. When pasting wallpaper, you need to pay attention to the cutting, splicing and pasting methods of the wallpaper to ensure that the wallpaper is beautiful and firm.

6.Repair details: After the wall is renovated, the details need to be repaired, such as painting cracks, sanding smooth, repairing holes, etc.

Wall renovation needs to pay attention to safety and environmental protection, avoid the use of harmful chemicals and materials, and at the same time need to pay attention to the construction environment and personnel safety to avoid accidents during the construction process.

1. After treating the old wall foundation, apply a layer of white cement. The original wall surface is too smooth and must be sanded after painting, and the previous unstable skin layer must be cleaned, so that the new paint will be more viscous. 2. The main function of the wall primer is to prevent moisture and protect the topcoat, which can improve the texture and hiding power of the topcoat.

If it is an old house renovation, you need to apply primer on the wall, if you don't paint it directly, the wall will be easily damaged after a long time.

1. If the wall has been painted, it will be more difficult to repair, and it is easy to have color difference, and it will become a large flower wall in an instant. In addition, the wear time of the material is different, and the quality is difficult to guarantee, and it is difficult to achieve the desired effect. If the restoration process is not completed, it is more troublesome if the painting process is completed.

2. Before painting, install the paint according to the instructions on the paint bucket, and you must prepare enough to ensure that the color is the same. When brushing the topcoat, you should also choose the best paint roller, and pay special attention to the problem of ventilation after painting, because the thinner with xylene will react with the latex paint component to cause the wall to turn yellow.

3. The wall must be cleaned first, and the wall will have these problems such as chalking and cracking after a long time, and the wall with serious chalking must be removed.

Wall renovation is essential in the renovation of old houses, but what do we need to pay attention to in the process of wall renovation? Just follow these four steps!

Step 1: Be sure to clean the wall before renovating

Before renovating the old wall, be sure to base the wall. Completely remove the heavily powdered and cherry-colored walls, and then apply a layer of white cement. If the old wall is very smooth and painted, then it is necessary to polish it after shoveling to remove the skin that is not firmly adhered to facilitate the bonding of the new paint to the wall.

Step 2: Before the wall renovation, Yiqin Qingding must apply a good primer and make a good base

For the renovation of second-hand houses, the treatment of the wall must be painted with primer. Wall primer can not only resist alkali and moisture, seal building materials, but also protect the topcoat and improve the texture and hiding power of the topcoat. If the wall is painted without primer, the wall will be prone to blistering, mold, and even discoloration after a long period of sun exposure.

Step 3: The repair area of the wall renovation must be large

When repairing the wall, it is best to use the whole wall, or try to choose a large area for this purpose, or to reduce color difference and maintain aesthetics.

If the wall is already painted, it is more troublesome to repair it. Not only is it easy to produce color difference before the disappointment, the use time of the material is different, and the quality can not be well guaranteed, and the ideal effect cannot be achieved.

Step 4: Maintain the same color as the old and new colors when renovating the walls

When renovating the wall, be sure not to produce color differences. Pay attention to the proportioning and painting according to the instructions of the paint bucket. It is best to estimate the amount of paint used, and prepare enough at one time to ensure that the color of the wall is consistent when the wall is renovated, and it can also avoid the color difference caused by remixing.

The above are the 4 steps to introduce you to wall renovation, I hope it will help you to decorate your house!

You can get it for free

Here's how:

1. Dismantling and cleaning.

The first task was to carry out the demolition and cleaning work, which included "demolishing old doors and windows, shoveling off the original walls, knocking out the original tiles and floors, etc." This part of the work takes different times depending on the size and workload of different homes. Taking a 60-square-meter house as an example, it generally takes about 5-6 days.

Generally speaking, the installation of windows only needs to be completed before painting the wall, wrapping the mouth and pasting the wall tiles. However, it usually takes a few days from setting the windows to installing them at the door, so you can start early.

2. Laying of wall and floor tiles.

After the completion of water and electricity and acceptance, you can carry out the laying of wall and floor tiles, generally first lay the wall tiles of the bathroom, kitchen or balcony, and then the floor tiles, which is due to the first paving of floor tiles in the wall tiles may cause damage to the wall tiles and the cleaning work is also very troublesome. If you have flooring in your home, you have to wait until the walls are painted and laid.

3. Wall treatment.

After the tiles are laid, you can treat the walls of the bedroom, living room and dining room, including leveling, repairing cracks, scraping putty, etc., and then brush latex paint. It is also possible to measure cabinets and ceilings. The reason why the cabinet measurement is carried out at this time is that the size of the main tiles after pasting is more accurate, and the size of the tiles should be estimated if they are measured in advance.

At the same time, it should be noted that the general cabinet needs to wait for about 10 days.

4. Installation. After brushing the wall paint, or when brushing the last topcoat, you can install the door and the pass, the door production time generally takes about 15 days, so according to this time to determine in advance, and finally install lights, panels, sanitary ware, etc. If you have woodworking furniture, you can paint it after painting latex paint.

It is recommended to remove the original paint on the wall and reapply putty powder and lacquer. If you use the original wall directly, the paint on the wall is easy to fall off.

The general process of painting the wall is: cement leveling--- bottom plaster--- scraping putty--- stucco paint (latex paint, wall paint), etc. Wall paint, latex paint, and paint are all a kind of stucco paint, and you can choose one.

If the wall is in good condition, there is no need to remove and repaint, just fill in the small holes left by the hanging frame, and then paint the paint that covers the wall.