Where to add BYD Surui 1 5 automatic gearbox oil

Hello, add in the oil drain port, and press the oil into it [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The gearbox of the BYD Surui does not have a separate fuel filler, and the replacement of the transmission oil is added from the fuel filler at the bottom of the gearbox. Changing the transmission oil regularly can extend the life of the transmission for the following reasons:

1. Because the automatic transmission oil cannot be completely discharged through atmospheric pressure, it can only discharge about 1 2 amounts of waste oil;

2. Sludge and impurities will accumulate in the valve body, torque converter and cooling pipeline of residual oil, resulting in blockage of the internal oil circuit of the system;

3. More than 99% of automatic transmission failures are due to overheating and ATF oil that has not been replaced for a long time, resulting in the appearance of impurities. Also check if the transmission pan is deformed or if there is oil leakage in the transmission line.

Summary. Hello, dear, check whether there is a dipstick on the gearbox of the engine, some pull out the dipstick to wipe the oil dry, and pull it out to check the oil level. If you don't have a dipstick, you have to lift the car up and find the position of the top pillar of the chassis.

Put the foot of the lift to the position of the top post, press the lift button to lift the car, and find the position of the transmission. Use a movable wrench to remove the observation hole screw, the observation hole screw is above the oil drain screw, and the lower part is to put the transmission oil, remember. Check whether there is a dipstick on the gearbox of the engine, and some pull out the dipstick, wipe the oil dry, insert it, and pull it out to check the oil level.

Hello, dear, check whether there is a dipstick on the gearbox of the engine, some pull out the dipstick to wipe the oil dry, and pull it out to check the oil level. If you don't have a dipstick, you have to lift the car up and find the position of the top pillar of the chassis. Put the foot of the lift to the position of the top post, press the rise button to lift the car, and find the position of the speed changer.

Use a movable wrench to remove the observation hole screw, observe that the hole screw is above the oil drain screw, and remove the lower part is to put the transmission oil, remember. Check whether there is a dipstick on the gearbox of the cavity mountain engine, and some pull out the dipstick to wipe the oil dry and insert it, and pull it out to check the oil level.

Dear,,Hello,, The oil of the gearbox is changed every two years or 40,000 kilometers. During the actual driving process, the frequency of changing the transmission oil is adjusted according to the type of car, the driving habits of the driver, and the driving environment.

Selection of transmission oil: 1. Choose the transmission oil with the right viscosity: When choosing the automobile transmission oil, choose the transmission oil with the appropriate viscosity.

If the viscosity of the transmission oil is too high, friction and overheating may occur during use, which will crack the high circle and cause power consumption. If the viscosity of the variable fissure tank oil is too low, an oil seal leak may occur. When changing the transmission oil, friends can refer to the car's owner's manual or repair manual.

Choose a high-quality brand of transmission oil: In order to save the time of choosing a transmission oil, choose a transmission oil of a little poor quality, which may have problems during use. Choosing high-quality transmission fluid can protect the gears during use, reduce wear and tear, make the car lighter when driving, and increase the service life of transmission fluid.

Immediately replace the variable permeability with trapped oil: the transmission oil is **. During the operation of the car, the active ingredients will be continuously consumed, and the performance of the transmission oil will also be degraded because of a little strange thought.

If you find that the transmission oil contains too much water during use, you should replace the transmission oil immediately. When the transmission fluid contains moisture, a milky white foam appears.

When changing the transmission oil, the old transmission oil and other impurities should be cleaned up immediately, and the mountain should be burned and treated with special equipment to prevent the transmission oil from affecting the failure in the process of use. 2. Choose the same type of transmission oil as the original car, replace the manual transmission oil for manual transmission cars, replace automatic transmission oil for automatic transmission cars, choose the appropriate model of transmission oil, and change the automatic transmission oil for automatic cars.

What transmission does the BYD Surui use Speedsharp uses a 5-speed manual transmission, and this car is not available in a model that uses an automatic transmission. Surrey is a compact sedan owned by BYD. This car uses a naturally aspirated engine with a desensitizing hood.

This engine has a maximum torque of 109 hp and 145 Nm of axle fiber. The engine delivers maximum power at 5,800 rpm and maximum torque at 4,800 rpm. The engine is equipped with VVL variable valve lift technology and features an aluminium alloy cylinder head and block.

Su Rui's front suspension adopts MacPherson independent suspension, and the rear suspension adopts torsion beam non-independent suspension. Compact rear suspensions in this price range generally use torsion beam suspension, because torsion beam suspensions are small in size and take up less empty space. The use of torsion beam suspension makes it possible to expand the empty space for rear passengers and the empty space for the trunk.

The cost of torsion beam suspension is also relatively low, which can reduce the manufacturing cost and selling price of the whole vehicle. The length, width and height of the Surui are 4680mm, 1765mm and 1490mm, and the wheelbase is 2660mm. If you are interested in Surui, you can go to the local BYD 4S store to see the car for a test drive.

The Surui configuration is relatively high, but ** is very low. The guide price of this car is between 10,000 yuan and 10,000 yuan, and Surui is relatively cost-effective. Millions of car purchase subsidies.

Hello, I am happy to serve you and give you the following answers: BYD Manual Surui uses 75W-90 transmission oil, which is a high-viscosity oil that can provide better lubrication performance, as well as higher wear resistance and wear resistance. Causes of the problem:

1.Poor transmission oil quality: Poor quality transmission oil can lead to increased wear and tear on parts inside the transmission, which can affect the proper functioning of the transmission.

2.Transmission oil change in time: Transmission oil change in time will lead to increased wear and tear of parts inside the gearbox, which will affect the normal operation of the gearbox.

Workaround:1Change the transmission oil:

Changing the transmission oil can effectively improve the working condition of the gearbox, thereby increasing the service life of the gearbox. 2.Check the parts inside the gearbox:

Check the parts inside the gearbox to make Sakura, and if Chunchun finds that there is wear, replace it in time to ensure the normal operation of the gearbox. Steps:1

Remove the gearbox: Remove the gearbox from the car and place the gearbox on level ground. 2.

Cleaning the gearbox: Wash the parts inside the gearbox with a clean solvent to remove grease and grime. 3.

Change the transmission oil: Change the transmission oil to 75w-90 transmission oil and fill the oil to the correct position of the transmission. 4.

Check the parts inside the gearbox: Check the parts inside the gearbox, and replace them in time if they are found to be worn out to ensure the normal operation of the gearbox. 5.

Install the gearbox: Install the gearbox for steam return.