Novices want to learn flute related questions

Yamaha 211 and 221 are relatively cost-effective musical instrument choices for beginners, their performance is stable, the feel is good, the electroplating process on the surface and the process of the pressure pad are relatively good, and the brand ** transparency is high (the more domestic and the brand is less famous, the more opaque it is, I won't go into detail about the reasons, this market has potential rules that cannot be destroyed), in summary, 211 and 221 are the best choice for beginners. In addition, the jeept is also very easy to sound, and when I first tried the flute, it felt good, but because the process of pressing the mat is deep pressure, there are many cases of various air leaks after a long time.

211 and 221 comparison, 211 more E key, more convenient to play the E3 note (treble 3), the price is not much expensive, 211 and 221 new DX series, the cutting process of the flute lace is a little different and the others are the same, the official ** is RMB 4200, and it is very cost-effective to find a teacher to buy within 3200 for you.

If you learn to play it out of interest, and use the domestic flute before, you may have some small problems with your breath and hands, because the flute leaks because your hands may be tight, and the hand shape will be affected, so it is not recommended to buy an open hole, and you can't adapt to it for a while.

If you say less than 500 US dollars, that is, 211, flute consumables, such as mats and the like, depending on your wind practice time, if it is not a professional day to n hours, more than ten years is no problem, pay attention to good maintenance OK (do not touch the keys when loading and unloading, wipe in time after blowing, but do not touch the spring wire, do not often wipe the silver water, silver is plated with only a thin layer, and it is gone if you wipe it often). There is no possibility of a lifetime without debugging and maintenance of the pad, especially the brand of the pad, there is its own brand of technology, can not be changed casually, if the ordinary method is changed, there is no meaning to buy the "brand", so to return to the original factory. The cost ...

Hehe, I'm a flute teacher, and if you have any questions, you can reply to the station. The above is a personal opinion, if you are not there, please forgive me, please do not copy plagiarism**!

Yamaha or Jupiter's, about 2800 to 3600 should be enough, beginner is not difficult, but deep learning, learning is difficult, and to insist on practicing, especially breath, articulation, fingering a lot to pay attention to, but I personally think that the flute is still a musical instrument to learn.

You can use Yamaha's (that's what I use) isn't too expensive, mine is 2400, and other cheap ones are available. In the beginning, you have to blow the sound with the mouthpiece, and then add fingering, and then you can see the notes automatically reflected later, which is much easier.

Blowing out the sound to practice according to the score, to be honest, it's not difficult, but I personally suggest that you need to start professionally, if it's just your hobby, you can buy a cheaper one, I don't know the price you want, the domestic one is cheap, about a thousand, not as good as the imported, but not very professional and not in the way.

Bamboo flutes are more difficult, and the differences between the two are as follows:

1. Vocal range. The flute follows the twelve rhythms of foreign instruments, while the bamboo flute has eight notes.

2. Timbre. The bamboo flute has a better timbre than the flute. The first is that the flute has a muddy timbre, not the so-called harshness. In addition, the flute has a single timbre, and the bamboo flute can change the timbre by changing the vibration mode of the flute membrane through the slow and rapid airflow. Bamboo instruments are more penetrating than steel instruments.

3. Structure. The outer ** flute is more complex than the bamboo flute, the bamboo flute is pressed by the hole, and the flute is pressed by the button. The result is that the flute's tempo is limited, and the transition between the two notes is stiff, without the "glissando" effect of the bamboo flute.

4. Learning difficulty. The flute is easier, and the bamboo flute takes a long time to learn to play all the sounds. Reason: The structure of the flute makes it sound as soon as you blow it, and the bamboo flute must have a steady airflow. In addition, the bamboo flute has more skills to master than the flute, and it is difficult to advance.

5. The blowing method is different. In the blowing, the semitones of the flute are mechanically driven by buttons that block the different 16-hole articulations, and the semitones are very accurate, with fixed chromatic fingering. The flute is made by blocking the 7 holes to produce a full tone, the semitone is pronounced by blocking the half hole, and the flute is a semitone so it is found by feeling, which may not be accurate.

First of all, it is not easy to learn the flute on your own, but it is not impossible, and it is necessary to pay great attention to the following issues: 1. Mouth shape.

In general, the mouth shape of the flute is relaxed, which is a far cry from bamboo flutes and other woodwind instruments. Specifically, the upper lip is slightly attached to the front teeth, and there is no "beep" protrusion at all, but it is still relaxed (slightly controlled, of course). The lower lip is very particular, the lower jaw is slightly retracted, so that the air flow from the blow rushes to the knife edge, to avoid the sound caused by flat blowing, and the corners of the lower lip and mouth are slightly controlled (this part of the classical flute is very well controlled).

The flute hole is pressed by about a third. Then use the thumb and little finger of the right hand to control the angle of the flute mouth and the breath, listen carefully, the angle is too large, the sound will be weak, and the angle is too small, the sound will be muffled. The inside of the mouth is larger, as if you have accidentally eaten a piece of hot tofu, but you can't spit it out or open your mouth wide to blow it cold.

Wind music is different from string music, a good string player's bow holding method is similar, and a good wind player has its own characteristics of mouth shape, the reason is that each person's lips, teeth, etc. are different, very different, which requires each player to explore a set of pronunciation methods suitable for themselves according to their own congenital, not simply imitate the teacher, but remember what the concept of good timbre is. 2。Technique.

Beginners may have some difficulty in grasping the flute, so it is necessary to practice the flute head and the flute separately at the beginning, so as not to be unable to control the mouth and hands. All fingers of the whole hand shape are relaxed and slightly flexed, and cannot be straightened, especially the right hand, when the normal grip of the flute is the palm of the hand can put an egg.