The computer cannot enter safe mode, and the blue screen is displayed at boot BAD SYSTEM CONFIG INFO

Immediately after booting, press f8 to the advanced option to appear in the let go, select the "latest correct configuration" enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, uninstall all the inappropriate things before the accident).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Computer blue screen, terminating**:bad system config info

Hello, computer blue screen, termination ** is bad system config info, which usually means that there is a problem with the system configuration information. Possible causes include: System hardware failure:

For example, hardware such as hard disks, memory, and motherboards fail, resulting in incorrect system configuration information. Operating system problems: Imitation segments, such as the loss or corruption of operating system files, resulting in incorrect system configuration information; Software problems: For example, the installed software is incompatible, virus infection, etc., resulting in incorrect system configuration information. BIOS setup error:

For example, the BIOS setting is incorrect, the Dayu CMOS battery is dead, etc., resulting in incorrect system configuration information. There are many ways to fix this problem, here are some common solutions: Restart your PC:

Try restarting your computer to see if it can get back to normal; Restore the system: If restarting the computer does not work, try using the system recovery function or reinstalling the system; Check the hardware: check whether the hard disk, memory, motherboard and other hardware are faulty; Update Drivers:

If this problem occurs because the driver is incompatible, you can try upgrading or downgrading the driver; Clear CMOS: If the problem is caused by the wrong BIOS settings, you can try to clear the CMOS; Scan for viruses: Use antivirus software to scan for virus infections.

Generally speaking, there are four things that can cause the blue screen error.

1.Occurs after performing a Windows update.

2.Occurs after the hardware is installed.

3.Installing or updating software (including driver software applications.)

After the occurrence. 4.Other factors (i.e., anomalies not caused by the above conditions) First, the first three items are mainly resolved by reverting to the previous normal situation.

If an exception occurs after a Windows update, the recent update will be removed.

If an exception occurs after installing the hardware, remove the hardware;

If there is an exception after installing or updating the software, remove or roll back the previous version of the software.

How to go through Device Manager.

Revert the previous version of the driver.

1) Right-click (1) on [Start] and tap [Device Manager] (2).

2) Tap Display Adapter.

The triangle next to the device type.

3)。Right-click on [Intel(R) UHD Graphics 620] (4) and select [Properties] (5).

This step is based on the Intel graphics card driver as an example, please roll back the version according to the driver error you encounter.

3) Tap [Driver] (6) and tap [Rewind Driver] (7).

4) Select [Reason you want to roll back to a previously installed driver] (8) and tap [Yes] (9). The system will start rolling back the driver to the previous version.

2. If the blue screen error is caused by other factors, please refer to the following steps to eliminate it.

a.Front-end jobs.

Remove external devices such as external hard drives, printers, memory cards.

The disc in the optical drive, the adapter card in the card reader, and so on.

Update the BIOS to the latest version.

Perform a system update and driver update to the latest.

b.System Restore.

After the backup, perform a system restore.

It can be handled by pressing F8 continuously to enter safe mode and restore the most recent correct configuration.

If the last successive configuration does not work, then select Safe Mode to enter and uninstall the recently installed software to deal with this failure.

For the above systems, you can force shut down the computer many times, and the advanced boot option will appear and select the repair system processing.

If you encounter a problem with your computer and need to restart the bad system config info, you can try to restore it with the last correct configuration.

1. Restart your computer.

2. After the computer displays the hardware information, press the F8 key before entering the Windows interface.

3. In the options menu that appears, select: Last correct configuration.

4. After selection, press enter, and the computer will automatically enter the system.

5. After entering the system, the computer has been restored to the last correct configuration.

Hello! This situation is system damage, it is recommended to find the system installation disk to reinstall the system!

This prompt is incorrect system configuration information. I guess it's still a system problem. You can only reinstall the system. If it is a brand machine, the system can be restored, and if it is an assembly machine, it is recommended to reinstall the system.

Update or reinstall the driver. If you have recently installed new hardware or updated drivers, you can try to update or reinstall the drivers, some versions of the drivers will cause system instability or even corrupt system files, and usually such drivers will soon release an updated version to fix these problems. Click the start button in the lower left corner, enter Device Manager in the pop-up menu, click it to enter the device management interface, in the Device Manager interface, click "Operation-> Scan for Hardware Changes", and then check if there is a yellow exclamation mark in the device list.

If you find a problematic driver, right-click on it and click "Update Driver" If the problem persists, right-click on the driver and then click "Uninstall Device", now Windows 10 supports automatic installation of drivers for most hardware, after uninstalling, Windows 10 will automatically request a WHQL certified driver installation package from Microsoft servers. If it is a third-party driver, you may need to go to the official website of the hardware **The latest driver. Fix with bcdedit command.

Reboot press the F8 key, enter the safe mode, find the last correct system configuration into the system, see if it can be restored normally, if the system can not be restored, then you can only reinstall the system, this situation may be. If it is not a normal power failure, and a sudden power failure will lead to the loss of system data, it is recommended to reinstall the system if the conditions allow.

This kind of problem is generally caused by the corruption of the registry or file in our system, and if the physical cause is ruled out, then it must be the reason for the system.

You can try to choose to restart the computer, press F8 to enter safe mode, if we can enter the system normally, then we can withdraw our previous misoperation. If you don't know, it doesn't matter, we can find some DLL repair software and registry repair software or system repair software, etc., to repair the system, if you want to use the network dry network, then we have to choose network security mode, so that you can enter the system normally.

If you can't enter the safe mode, and you can't use other software to repair it, and you don't have any computer foundation, then we can try to redo the system, and we can transfer the files of our C drive in the PE environment, so that the files will not be lost.

If you change the system of different versions for many times and still prompt bad system config info, then it is very likely that there is a problem with our hardware, such as: memory module, hard disk damage, cable interface slack, then these problems will also lead to bad system config info, we need to check our computer hardware before making a judgment.

Bootstrap error. Change micrope reinstall or bootice tool recovery.