My computer won t go into safe mode!! 50

After selecting the option "Show hidden files", I found that a file on the USB flash drive flashed out and disappeared immediately, and when I opened the folder option again, I found that it was still the option of "Do not show hidden files". And just found that when you click on the C, D and other drive letter icons, another window will open!

Summary i. Description of the condition.

1. Hidden files cannot be displayed;

2. When you click the drive letter icon such as C and D, another window will be opened;

3. When you use winrar to view, you find that there are and two disgusting files in the root directory such as c and d;

4. There is an inexplicable kill in the application process column of the task manager;

5. There are inexplicable startup items in the boot item.

ii. Solution.

I used some special tools and batch files under DOS, but they were not easy to use, so I had to DIY. Note that do not double-click on the hard disk partition during the following whole process, and use the right mouse button to open it when you need to open it >.

1. Shut down the virus process.

In the task manager application, look for processes like kill that you don't recognize, right-click - > go to the process, find a process similar or a certain one, right-click - > end the process tree.

2. Show hidden system files.

Start—>Run—regedit—input.

hkey_local_machine\software\microsoft\windows\currentversion\explorer\ advanced\folder\hidden\showall

Delete the checkedvalue key, right-click New—> dword value—> name it checkedvalue, and then modify its key value to 1, so that you can choose "Show all hidden files" and "Show system files".

3. Remove viruses.

Right-click on a partitioned disk—> open it, and you will see that each disk has and tel. in the directoryxls\.exe two files, delete them, the same for the USB disk.

4. Delete the auto-run items of the virus.

Start - > run - >msconfig - > start - > delete similar entries, or open the registry and run regedit

hkey_local_machine>software>microsoft>windows>currentversion>run

Remove items like C: Windows System32.

5. Delete legacy files.

C: Windows and C: Windows system32 directory delete note that the system has a similar file, the icon is weird that similar to the Excel icon is a virus) and all Excel similar icon files, two per folder, don't delete by mistake, pay attention to yourself.

After restarting the computer, it's basically OK.

After entering normal mode, right-click on "My Computer", select "Properties", click on the "Advanced" tab, and see the "Startup and Failback" point settings below. Select "Show recovery options when needed", set the value after it to a slightly longer value (the default is 30), and then decide to close the dialog box. Try again by pressing f8 after restarting?

Is there a selection menu?

Good luck! If not, the only option is to reinstall the system.

Addendum: Listen to me, you can't do it for two days, and it's all reloaded.

It's useless to reinstall the system?

Dial it, start it with a disc drive, lattice all the disks, and then install the system, guaranteed to be solved!

Do it all over again with an installation disk.

The computer can't start normally, and the safe mode can only start, which may be caused by the grip height due to the following reasons:

System files are corrupted or missing.

The graphics card driver is damaged or incompatible.

Hardware failures or conflicts.

You can try the following methods to solve this problem:

Using the system in safe mode also talks about the original or system repair function.

Uninstall or update the graphics driver in Safe Mode.

Check and fix disk logic errors in safe mode.

Check and adjust the hardware settings on the BIOS interface.

Method 1: Boot with the installation disk and then repair it with the faulty console.

The following describes how to enter the fault console:

Boot from a disc: Start the Recovery Console

Set up disc startup.

At the time of booting, on the first screen, press the DEL key (multiple presses in a row) to enter the BIOS settings.

For the award BIOS, select the second option for First Boot Device and press Pagedown or PageUp, or add and minus keys to select until.

The cdrom option appears, then press Esc, press F10 to save your changes, and restart.

For the AMI BIOS, after entering the BIOS, press the right arrow key to the fourth item, find the option of First Boot Device, adjust it until the CDROM appears, then save the changes to exit, reboot.

Insert the installation disc of Windows XP, after starting the computer, the system will automatically enter the Windows XP installation interface option, press the "R" key to select the second item "To use the 'fault console' to repair the Windows XP installation, press R." "The system automatically logs in to the Failback Console.

It automatically finds and numbers the already existing system and its installation directory. At this point, ask which system you need to repair. There's only one here, and if it's more than one, they'll all be displayed. Enter "1" and press Enter.

Method 2: Reinstall the system. If the system has been backed up with software such as ghost, you can restore it, otherwise you can reinstall it with the system installation disk.

It is very likely that there is a system problem, and it is easy to reinstall.

It's also possible that the hardware is incompatible, I've tried it before. Hardware overclocking (especially the CPU) causes the system to be unstable, and it will automatically restart as soon as it enters the desktop or runs it.

Try copying an NTLDR file from the I386 folder of the installation disk and overwriting the files on the C drive. If it doesn't work, you can only reinstall the system.

It is estimated that there is a problem with the computer system, and it is good to redo the system.

The easiest way to do this is to repair the system with a system installation disk, or simply reinstall the system.

Boot the system from the installation disk. Reinstall the system.

Five dollars to buy a special edition of the ghost computer company is OK. Fools will pretend to be ha, don't say no, the landlord.

The system in your hard disk has been lost, please redo the system, if you don't believe it, you can use a belt windows

PE's look, you can only redo the system.

This line of English roughly means "I didn't find a device that can boot the computer", it may be that the hard disk cable is loose, plug the data cable and power supply cable of the hard disk back in and take a look, if it still doesn't work, it may be that the hard disk is broken.

Your computer's boot file is missing and the master boot record cannot be found. That is, you need to reinstall the system, or you can install the system in a repair way.

My understanding is that your system is infected or your boot program is corrupted or does not start, so you cannot enter the operating system. It is recommended that you start from scratch.

It can only be started in safe mode, which means that you have installed inappropriate software, drivers, etc.

1) Press F8 immediately after booting to the advanced option to let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or restore the system or reinstall it).

First soft and then hard,If there is such a problem, the driver is not suitable、Caused by system problems,You can restore the system in safe mode,Or can't reinstall the operating system,Don't install software、Patches、Drivers, etc.,See if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install them if you find something inappropriate (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

Fix it with the system disk.

Enter Safe Mode to remove recently installed software.