-
Anonymous users2024-02-091,4cif 704 576 352 288 (i.e. d1 as we often say).
2, 2cif 704x288
3，dcif 584x3844
4，cif 704x576
5，qcif 176x144
First, QCIF stands for Quarter Common Intermediate is a commonly used standardized image format. In the protocol cluster, the standard acquisition resolution of the acquisition device is specified. qcif = 176 144 pixels.
Second, CIF is a commonly used common intermediate format. In the protocol cluster, the standard acquisition resolution of the acquisition device is specified. cif = 352 288 pixels.
Third, the CIF format has the following characteristics:
1) The spatial resolution of the TV image.
is the resolution of the video home system (VHS), i.e. 352 288.
2) Use non-interlaced scan.
3) Using the NTSC frame rate, the maximum frame rate for a TV image is 30 000 1001 frames.
4) Use a PAL horizontal resolution of 1 2, i.e. 288 lines.
5) The luminance and two chromatic aberration signal components (Y, CB and CR) are encoded separately, and their value range is the same as that of ITU-R. That is, black = 16, white = 235, the maximum value of color difference is equal to 240, and the minimum value is equal to 16.
Fourth, the resolution can be changed from the display resolution.
and image resolution in two directions.
Display resolution (screen resolution.
It is the precision of the screen image.
Refers to how many pixels the display can display. Since the dots, lines, and surfaces on the screen are made up of pixels, the more pixels a display can display, the finer the picture will be, and the more information can be displayed in the same screen area, so resolution is one of the most important performance indicators. Think of the image as a large chessboard, and the resolution is expressed as the number of intersections of all the meridian and latitude lines.
When the display resolution is constant, the smaller the display, the clearer the image, and conversely, when the display size is fixed, the higher the display resolution, the clearer the image.
Fifth, the relationship between resolution and pixels.
**Actual size is determined by pixels. A pixel is very large, and if the resolution is set to be large, the printed ** may not be large (but it is clear). Conversely, if you set the resolution to a very small resolution, the print may be large (but not sharp).
Commonly referred to as a 3 million pixel digital camera.
The maximum image resolution is 2048 1536 3145728 pixels, which means that the effective pixels are 3.14 million. The same is true for other pixel-level digital cameras, where the resolution and effective pixels are converted. As you can see, the higher the pixel, the higher the maximum output image resolution.
-
Anonymous users2024-02-084cif 2cif cif qcif image difference:
1. The resolution is different.
4cif: 704*576
2cif: 704*288(half d1)
cif: 352*288
qcif: 176*144
2. The code stream is different.
CIF: Single stream
2CIF: dual-stream
4CIF, QCIF: multi-stream
Data rate refers to the data flow used by the file in a unit of time, also known as the bit rate, and is the most important part of the quality control of the picture in the encoding. At the same resolution, the larger the bitrate of the ** file, the smaller the compression ratio, and the higher the picture quality.
CIF is the abbreviation of Common Intermediate Format, that is, the video transmission format commonly used in the General Video Conference, with a resolution of 352 x 288 pixels, and the video transmission can reach 30 frames per second, which conforms to the ITU Conference Data Transfer Protocol.
QCIF: Quarter Common Intermediate Format. It can be simply understood that the resolution is half of the horizontal and vertical pixels.
2cif: double cif, this is rare. The DCIF resolution is the ** image is to convert the odd and even two half D1 into a D1 (720*576) after interlacing, D1 is used as a boundary processing to become 4CIF (704 576), and 4CIF is reduced horizontally 3 4 and vertically 2 3 reduced to 528 384.
4CIF: Quadruple CIF. It can be simply understood that the resolution is 2 times that of horizontal and vertical pixels.
-
Anonymous users2024-02-07Differences: 1. The resolution is different.
4cif=704x576 pixels.
2cif=704x288 pixels.
cif = 352 288 pixels.
qcif = 176 144 pixels.
2. The upper limit of the bit rate.
4cif：768k~2mbps
cif：768k~1024kbps
cif：512k~768kbps
qcif：160k~224kbps
-
Anonymous users2024-02-06The differences are as follows:1 Different resolutions.
4cif：704＊576
2cif：704＊288（halfd1）
cif：352＊288
qcif：176＊144
2 Different streams.
CIF: Single stream
2CIF: dual-stream
4CIF, QCIF: multi-stream
Also known as bitrate.
is an important part of image quality control. At the same resolution, the larger the bitrate, the smaller the compression ratio, and the higher the image quality.
CIF: The common image transmission format in the conference. With a resolution of 352x288 pixels and an image transfer rate of up to 30 frames per second, it complies with the ITUH 261** conference data transfer protocol.
qcif：1／4cif。It can be simply understood that the resolution of both horizontal and vertical pixels is half.
D1 (720 576) is formed, and D1 is treated as a boundary and becomes 4CIF (704 576). 4CIF is reduced horizontally by 3 4 and vertically by 2 3 to 528 384.
4CIF: Four times the CIF. It can be simply understood that in terms of resolution, both horizontal and vertical pixels are 2 times.
-
Anonymous users2024-02-054cif 2cif cif qcif image difference:
1. The resolution is different.
4cif: 704*576
2cif: 704*288(half d1)
cif: 352*288
qcif: 176*144
2. The code stream is different.
CIF: Single stream
2CIF: dual-stream
4CIF, QCIF: multi-stream
Data rate, refers to the data flow used by the file in a unit of time, also known as the code rate, is the most important part of the picture quality control in the encoding. At the same resolution, the larger the bitrate of the ** file, the smaller the compressed lead-to-start ratio, and the higher the picture quality.
CIF is the abbreviation of Common Intermediate Format, that is, the video transmission format commonly used in the General Video Conference, with a resolution of 352 x 288 pixels, and the video transmission can reach 30 frames per second, which conforms to the ITU Conference Data Transfer Protocol.
QCIF: Quarter Common Intermediate Format. It can be simply understood that the resolution is half of the horizontal and vertical pixels.
2cif: double cif, this is rare. The image of DCIF resolution is to convert the odd and even two half D1 into a D1 (720*576) after reverse interlacing, and D1 is processed as a boundary to become 4CIF (704 576) This rock, 4CIF is reduced horizontally 3 4 and vertically 2 3 is reduced to 528 384.
4CIF: Quadruple CIF. It can be simply understood that the resolution is 2 times that of horizontal and vertical pixels.
The precision of the screen imageResolution refers to the precision of the screen image and indicates how many pixels the display can display. >>>More
The problem you are talking about is the point distance of liquid crystals. If you look at the liquid crystal carefully, it is a small grid, and the small grid of the computer monitor is relatively large, because we generally look at it far away, at least a few tens of centimeters away, and the LCD grid is too small to see clearly. >>>More
Check to see if the graphics driver is installed correctly.
Right-click on the left, select "Properties", then select "Settings" in the window that appears, and then drag the "Screen Resolution" below to the size of "1440*900". Hope it helps.
You can adjust the resolution to 1024*768, and then, right-click on the desktop, select Properties, select Appearance, this option has the option to set the display font size, you can adjust it to the size you think is appropriate. Good luck!