Which is more expensive to print or develop color photos

Which is more expensive to print or develop LZ color photos.

It depends on the size of the piece.

When you're under 10 inches, and the amount isn't large, the processing cost is lower than printing.

When you're more than 10 inches in size or you're producing a lot of work, the cost of processing is much higher than the cost of printing.

The difference between the cost of processing and color printing can be seen in the large poster printing and the large number of magazine printing.

If you need to verify in person, you can go to the photo shop and ask for a **quality of more than 12 inches** and then ask the print shop for the **quality** of printing more than 12 inches** (there is a premise not to enter the black store).

Of course, the flushing cost is low.

That's because the color is not adjusted properly during the rinse, or the medicine is expired, and the development is excessive, etc., which is a technical problem of the store.

It's better to print by yourself, you can control it yourself, adjust it as you want, and the cost is low and convenient.

Not necessarily. The operation of a piece of equipment, rent, water, electricity, etc., are all his costs.

Printing at home only has consumables and wear costs, and the two cannot be compared horizontally.

And the technical conditions are not the same, the quality is also different, how to compare?

In general, the cost of printing is higher than the cost of printing.

The effect of the processing depends on the relevant parameters of the color of the printing machine, and the effect of adjusting the printing in place is also very good.

1. The cost of printing is lower than that of processing.

If you print**, the general cost will be lower; But if it is directly flushed out, the cost will be much higher, so many people prefer to print**, not only because the printing is fast, but more importantly, cheap.

2. The rinsed ** is more waterproof.

The printed ** is easy to be damaged once it encounters water, but if it is rinsed**, as long as we remove the water stains in time, it will not have much impact, and it can continue to be savedTherefore, the printer is not afraid of water, he himself comes out of the water. And the printed one is not good, and it will be spent when it meets water.

3. The first storage time of rinsing is longer.

Printed ones are usually stored for a shorter period of time than processed ones because they are printed with inkjet, which has a shorter retention time. Rinsed ** can usually be stored for more than ten years, and if it is well preserved, it can reach several decades. **The final imaging material and principle of the processing are similar to the original film processing.

Depending on the paper and potion provided by the developer, there are those that claim to be stored for 60 years or more than 100 years.

4. The best effect of flushing should be better.

Generally speaking, if it is printed, its clarity and color will be slightly inferior to that of the processed, which is the most obvious distinguishing feature.

At present, the effect of rinsing is better, because it uses traditional cameras and potions, which is low-cost, fast, and lasts for a long time. It costs only about 2 yuan to develop a 7-inch one, and it costs about 5 yuan to print a 7-inch one.

Of course, the rinsing effect is better...

The specific price depends on how big the ** you want to wash.

Because it should be 20 yuan, it is now available.

Of course, it's the effect of the rinse! Washing a 7-inch one is about 2 yuan, and the printed one is generally a little more expensive, so it is recommended to rinse it.