What exactly is the burning of the washing machine, and what is the reason why the motor of the wash

Generally, when it is used, it is the enameled wire (common name: copper wire) of the motor that is burned, or the capacitor (a cylindrical thing the size of an egg).

But if it's just plugged in and not used, nothing should burn. If you want to burn it, it should be something that comes into contact with the power supply, such as wiring, switches, etc.

Capacitors are cheap, one or twenty yuan, and they are also easy to connect.

The motor is more expensive, about 200 yuan, and it is not very difficult to change it, install it, and connect the wire.

The washing machine burned mainly the motor and clutch burned, and it was good to replace it.

Common causes and solutions of washing machine failures:

1. The power supply voltage is unstable, check the power supply voltage.

2. If the computer board is broken, replace the computer board.

3. Communication failure, check the communication line.

4. Control loop fault, check the line.

5. The program is chaotic, replace the chip.

It should be a short circuit somewhere in your washing machine, such as the line is aging, the insulation layer outside the line is aging, and the water touches it, so it is short-circuited, and the spark ignites the rubber of the line after connecting the electricity.

The power supply or computer board is burned, either someone at home is studying electrical majors, or it is better to find after-sales maintenance, and only when it is broken can you know the maintenance**.

I don't know if your home is smart or ordinary, but if you can only say that there is a problem with the motherboard, the ordinary one is the situation upstairs.

Summary. There are three reasons why an electric motor will burn out: it is too heavily loaded, it is heavily damp, or it is forced to stop.

1. The motor load is too heavy: the weight of the washed clothes exceeds the rated amount, the load of the motor is too large, and the temperature rises, resulting in the burning out of the motor unit. In addition, long-term high-water overflow will also burn out the motor due to overload.

2. Motor moisture: Before leaving the factory, each motor component will be insulated and impregnated, and the insulation test will be done, and the inspection will be put on the market only if it is qualified. If it is in a humid environment for a long time, or if the insulation layer is damaged during use.

It will cause a short circuit at the motor winding connection, the current will increase, and the high temperature will be generated, and the motor will burn out.

3. Forced shutdown of the motor ** Due to long-term use, there will be some debris stuck, aging and rusty parts cause the motor to not work normally, when this happens, the motor is in a starting state for a long time, and the continuous starting current causes the motor winding to burn out.

What is the reason why the motor of the washing machine will burn out.

There are three reasons why an electric motor will burn out: it is too heavily loaded, it is heavily damp, or it is forced to stop. 1. The motor load is quickly lifted too much

The weight of the laundry washed exceeds the rated capacity, the load on the motor is too large, and the temperature rises to the top of the pot, resulting in the burning of the motor unit. In addition, long-term high-water overflow will also burn out the motor due to overload. The number of Chang ruined.

2. Motor moisture: Before leaving the factory, each motor component will be insulated and impregnated, and the insulation test will be done, and the inspection will be put on the market only if it is qualified. If it is in a humid environment for a long time, or if the insulation layer is damaged during use.

It will cause a short circuit at the motor winding connection, the current will increase, and the high temperature will be generated, and the motor will burn out. 3. Forced shutdown of the motor ** Due to long-term use, there will be some debris stuck, aging and rusty parts cause the motor to not work normally, when this happens, the motor is in a starting state for a long time, and the continuous starting current causes the motor winding to burn out.

For you, you have sorted out some precautions for daily use of the washing machine, you can keep it and collect it.

The following matters should be paid attention to in use: 1. Washed or dehydrated clothing should be within the rated range. Flipping of the garment inside the bucket can usually be observed. If it is obvious that the inversion of the cavity is weak, the balance should take out some clothing.

2. When abnormal sound and smell are found during the washing process, the power should be unplugged immediately, the cause should be identified, and the fault should be eliminated before use. 3. The drainage pipe should be put down before use, and the drainage should be kept unblocked. 4. When using, avoid water splashing into electrical parts or water overflowing outside the barrel.

5. Wipe the body dry after use and place it in a dry and ventilated place. 6. It should be avoided when the grid voltage is too low. 7. The motor of some new washing machines is equipped with an overheating protector, which will automatically cut off the circuit when the temperature rise of the motor exceeds the allowable range to avoid accidents.

However, it is important to find out why the temperature rise of the motor is too high.

The motor of a washing machine can burn out due to a variety of reasons, and here are some common ones:

1.Overload: When the washing machine puts too much laundry or too much detergent in one go, the motor can be overloaded. Prolonged overload operation may cause the motor to overheat and burn out.

2.Short circuit: A faulty electrical connection, breakage, or damaged insulation can cause a short circuit in the motor. A short circuit can cause the current to rise rapidly, causing the motor to overheat and burn out.

3.Motor failure: Manufacturing quality issues with the motor itself, bearing wear, or coil aging can cause the motor to not work properly, or even burn out.

4.Overheating: Lengthy or frequent use of the washing machine, especially in a high-temperature environment, may cause the motor to overheat. Overheating will cause the insulating material of the motor to age, which will reduce the life of the motor.

5.Bearing wear: Bearing wear can cause abnormal vibrations during the operation of the motor, which may lead to overheating and burning of the motor.

6.Power supply problems: The power supply voltage fluctuates too much or is unstable, which may cause the motor to not work properly or even burn out.

To avoid the washing machine motor from burning out, the following measures can be taken:

1.Use the washing machine correctly, following the recommendations in the instruction manual.

2.Clean and maintain the washing machine regularly to ensure that the electrical connections are intact and to prevent short circuits.

3.Avoid prolonged, frequent use of the washing machine, especially in high-temperature environments.

4.Keep the environment where the washing machine is located dry and ventilated, avoiding humidity and heat.

5.Regularly inspect and replace bearings and other wear parts if necessary.

There can be several reasons why a washing machine motor burns out, and here are some of the common ones:

Overload or long hours of work: If the washing machine is overloaded or under heavy pressure during prolonged use, it may cause the motor to burn out. Try to reduce the amount of laundry you wash at the same time and the amount of time you wash per use.

Aging washing machines: Long-term use of a washing machine can lead to wear and tear on components, especially if the machine has been in service for many years and has been used frequently, it is highly likely to have problems.

Circuit Short Circuit: Any fault in the circuit can lead to a short circuit in the motor, resulting in burnout. Such short-circuit problems can be related to circuit boards, wires, or controllers.

Immersion: Water can flood the motor and dust the hopper and cause damage to cables and motors, resulting in a short circuit hazard.

Power supply problem: The unstable external current can cause the motor to burn out. To prevent inertia opening of the motor due to the above maintenance problems, a suitable voltage stabilizer is required.

Please note: Do not attempt to repair the washing machine yourself unless you have sufficient technical ability and knowledge. It is best to have a professional technician inspect and repair it.

The main reasons for the reputation of lead are:

Overload or blockage: When the washing machine is running, if the load is too heavy or there is a blockage, it will cause the motor to be overloaded, overheated and burn out. Therefore, when using the washing machine, it is necessary to pay attention to controlling the number of items loaded and cleaning the filters, drains and other components.

Unstable voltage: If the voltage in the area where the washing machine is located is unstable, such as frequent voltage fluctuations or power overloads, it will also cause the motor to burn out in the long run.

Aging or damaged spare parts: The structure of the washing machine motor is complex, including the balance wheel, rotor, stator, radiator and other components. If the quality of the zero Huai wide section is not good or the daily maintenance is not appropriate, it will be damaged or aged, which will lead to the failure of the motor.

High ambient humidity: Since the washing machine is a mixed operation of water and electricity, too high indoor humidity will also affect the motor, and it will also cause the motor to burn out for a long time.

There are many possible reasons for the burning out of the washing machine motor, and here are some of the common ones:

Overload: When the load on the washing machine exceeds the capacity of the motor, the motor will overheat and may burn out. This could be due to an increase in rotational resistance due to an internal failure of the washing machine, or due to the washing machine being overloaded with too much laundry.

Unstable voltage: If the supply voltage is unstable, such as too high or too low, the motor may not work properly or overheat, resulting in burnout.

Prolonged continuous operation: If the washing machine runs continuously for a long time without proper rest period, the motor may heat up and burn out over the cavity. Proper cooling time is important to protect the motor.

Circuit faults: Faults in circuits, such as short circuits in wires, motor windings, etc., can cause abnormal currents, which can overheat the motor and eventually burn out.

Aging and wear: After a long period of use, the parts of the washing machine motor may be worn, such as bearing wear, rock tremor, winding aging, etc., which may lead to motor failure and burnout.

In order to avoid the washing machine motor burning out, it is recommended to pay attention to the following:

Follow the load instructions of the washing machine and do not overload the washing machine.

Avoid running the washing machine continuously for long periods of time and give the washing machine a break.

Pay attention to the stability of the supply voltage, and if the supply voltage is unstable, consider using a voltage regulator or other equipment to adjust it.

Clean and maintain your washing machine regularly to ensure that it is functioning properly.

If you find that the washing machine motor has abnormal noise, peculiar smell or other problems, contact professional maintenance personnel for repair and maintenance in time.

Overload workmanship, motor aging.

The reasons why the washing machine causes the smell of burnt paste are as follows:

1. Whether there is a sock towel falling into the outside of the drying bucket, wrap the shaft of the spinning bucket, the spinning bucket does not move, and there is a burning smell.

2. Spin dry the barrel shaft and water seal for a long time without rusting, and the spinning motor will not rotate, and there will be a burning smell.

3. The capacitance capacity of the spin-off motor is reduced, there is a burning smell, and the sound is small.

4. The spin-off motor is damaged and has a burning smell.

5. The brake brake of the spin-off motor is damaged and has a burning smell, check it.

6. Washing machine belt. This can happen with a loose belt in the washing machine. The washing machine belt is loose, and part of the output force of the motor will be turned into heat consumption by the sliding belt, and the belt will have a burning smell.

Hello, I have seen your problem, I am sorting out the information, and I will reply to you right away The most likely thing to cause the smell of burnt paste is the washing machine belt. This can happen if the washing machine belt is loose or if it is loose due to damage. The washing machine belt is loose, and part of the output force of the motor is turned into heat by the sliding belt.

This is the reason for the odor.

In this case, it is recommended that you ask a professional to replace the washing machine belt, oh dear, is there a warranty period for the washing machine

Ask a question, oh yes, thank you!

Kiss, can you give a thumbs up, it's very important to me

Summary. Most of this is caused by overheating of the motor or wear of the V-belt. Newly purchased washing machines often have a peculiar smell of insulating oil due to overheating of the motor.

The causes of motor overheating are:

When the new motor is placed too much washing and the motor is overloaded, it is easy to increase the temperature rise of the motor rapidly. At this time, the amount of washing should be appropriately reduced. Motors with a high temperature rise also smell of insulating oil when the insulating paint is not dried well.

The motor is blocked and cannot rotate because the wave wheel is stuck by clothing or the power supply is single-phase. The fault should be quickly eliminated to prevent the motor from burning out, generally within 30 minutes of stalling, the motor will not burn out.

If the voltage is too low, the motor cannot operate normally, which increases the current of the motor and causes overheating. At this point, it's best to pause your work.

In the process of motor manufacturing, there are quality problems and peculiar smells, and the motor should be replaced.

V-belts are prone to odor due to being too tight and too loose. If it is too loose, it is easy to slip and wear out the smell of rubber. If it is too tight, it will cause excessive wear and tear due to the belt pressing into the bottom of the pulley groove, resulting in odor. The belt should be tightened appropriately.

Washing machine when washing why, there will be. Burnt taste.

Hello, I have seen your question and am sorting out the answer, please wait a while

Most of this is caused by overheating of the motor or wear of the V-belt. Newly purchased washing machines often have a peculiar smell of insulating oil due to overheating of the motor. The causes of motor overheating are:

When the new motor is placed too much washing and the motor is overloaded, it is easy to increase the temperature rise of the motor rapidly. At this time, the amount of washing should be appropriately reduced. Motors with a high temperature rise also smell of insulating oil when the insulating paint is not dried well.

The motor is blocked and cannot rotate because the wave wheel is stuck by clothing or the power supply is single-phase. The fault should be quickly eliminated to prevent the motor from burning out, generally within 30 minutes of stalling, the motor will not burn out. If the voltage is too low, the motor cannot operate normally, which increases the current of the motor and causes overheating.

At this point, it's best to pause your work. In the process of motor manufacturing, there are quality problems and peculiar smells, and the motor should be replaced. V-belts are prone to odor due to being too tight and too loose.

If it is too loose, it is easy to slip and wear out the smell of rubber. If it is too tight, it will cause excessive wear and tear due to the belt pressing into the bottom of the pulley groove, resulting in odor. The belt should be tightened appropriately.

I adjusted to the fast wash for 15 minutes, why can't I see the water in when washing, the clothes seem to be very smelly after washing, and the washing machine is also very hot inside.

It's been less than a month since I bought it.

If you don't adjust the quick wash function, it won't.

Please you and I this question is not the washing machine broken.

Yes, the washing machine you bought should have a problem with the internal wiring, it is recommended that you go to the merchant to warrant it.