Can the installed geothermal heat be changed to electric heating, and can the heating be changed to

Yes, directly wear a heating cable in the geothermal pipe, the pipe needs to be injected with heat conduction liquid (-25 ° antifreeze), and then the two ends of the pipe are closed, and a thermostat is installed on the wall, the good thermal conductivity of the heat conduction liquid is better to transfer heat, and the expansion pressure of the closed pipe can increase the heating effect and achieve long-term heat storage and heat preservation. This makes it more energy-saving and power-saving.

The installation of this electric heating liquid pipe floor heating, without smashing bricks, without destroying the decoration can be completed, and the original floor heating pipe can also be used (worry-saving and labor-saving).

1.Friends who have done floor heating should know that the laying process of floor heating requires a 2cm thick insulation board and a 5 cm pipe layer, and then lay floors or floor tiles on it, so it is not recommended to transform the floor height. If the floor height is about 8 cm higher than the average floor height, it can be changed.

When the house was renovated, it was decided to lay wooden floors on the floor, and it is not recommended to change it to underfloor heating. Because there is a keel at the bottom of the wooden floor, laying underfloor heating under the wooden floor is easy to damage the pipes and even affect the heating effect. Central heating cannot be changed to floor heating, because it was illegal to change it last time, and the impact is very big after the change.

2.The main reason is that the floor heating itself has a long pipe, and there will be a certain amount of water resistance. If you change the underfloor heating, it is likely to affect the heating effect of other households.

So it can't be changed at will. If you want to change, you need to obtain the consent of the developer or property company, and then it depends on whether it meets the requirements of the transformation. The main difference is that the range of heating is not the same.

The heating of the community includes the entire range of the community and does not include other areas, so the range is relatively small.

3.The temperature of hot water** for central heating is around 60-90. Heating systems that are directly connected to the floor can cause excessive temperatures, which can cause discomfort to the human body due to high surface temperatures, and will also cause excessive wear and tear on the heating system.

This problem can be solved by installing a mixed water cooling device for underfloor heating and a mixed water cooling center in a centrally heated home. Another method is to abandon central heating and use wall-mounted gas stoves and underfloor heating pipes to form a separate single-family heating system.

4.It is important to consider that if you use this method, it is best to negotiate with the developer when buying a house, because people from the property management company will generally not agree. Because the long underfloor heating pipes will lead to high water resistance, which has a certain impact on the central heating system.

However, this method can save a lot of later operating costs. If you live in central heating, but want to change the floor heating, then first find the main pipe where the heating is located, then cut off, remove the original heating, and then connect the floor heating main pipe, introduce the new main pipe into the kitchen or bathroom, and then connect the necessary equipment, and then lay the floor heating coil according to the normal floor heating installation process.

The community is central heating, and you can also choose to change the floor heating yourself, because the effect of floor heating is better, and you can choose to ask the property in your own community before changing it, or whether you can use the change.

You can change it according to your own needs. If you decorate by yourself, as long as it does not affect the public interest and does not affect other owners, you can change the floor heating, and it will be warmer to add a heating method.

No, because the community belongs to the heating method of central heating, so if you change the floor heating yourself, it may cause greater trouble to the community.

Yes, but you should ask a professional to modify the floor heating, pay attention to the decoration situation, and be sure to avoid all aspects of risks.

According to the relevant national regulations, heating facilities cannot be changed privately. Because a series of design parameters such as heating**, radiators, heat sources, etc., are different from central heating. If it is secretly replaced, the resistance to global warming will increase, the circulation of the system will be affected, and it is easy to cause heating problems for neighbors.

Therefore, if you must change, you have to get the consent of the real estate and the neighbors. The temperature of the heating hot water in the general community is about 60 90, and the temperature of the heating system directly connected to the ground is too high, and the surface temperature of the human body is too high, which is not only inconvenient, but also causes excessive losses to the heating system. Installing a global warming mixed water cooling unit and installing a mixed water cooling center on the ** heating client can solve this problem.

If you still want to use ** heating as a heat source, you can remove the radiator and lay the heating pipes. The advantage of this method is that there is no need to spend extra money on a gas stove, so there is very little cost to save money and investment. Another way is to abandon ** heating and use a wall-mounted gas stove to form a separate single heating system using a heating stove.

With this method, it is best to negotiate with the developer when buying a house. Because people from property management companies generally disagree. The length of the pipes of global warming will have a certain impact on the heating system because the resistance of water is great.

However, such post-operation expenses can be saved a lot. There are pros and cons to central heating and global warming. Global warming is healthy and comfortable, especially good for the elderly and children.

However, the heating cost can be higher, and the quality of the project should be ensured during installation. So readers make appropriate choices according to their life needs.

Global warming is not only a place to have fun at home with children, but also to worry about children catching a cold. Even if there are elderly people in the family, there is no need to worry about the anger of the elderly in winter. Global warming can solve this problem, and it is essential for central heating to change global warming.

Can central heating change global warming? It is a question that many people are concerned about. Next, I will introduce you to the comfortable home of Seven Stars, whether central heating can change global warming.

A set of global warming systems is mainly divided into water temperature, electric heating and ultra-thin global warming. Among them, water temperature heating, also known as low-temperature hot water ground radiation heating, is a heating method that uses hot water with a temperature lower than 60 as the fruit body, circulates in the heating pipe, heats the ground, and heats the room through the heat transfer method of ground radiation and convection. Therefore, central heating can change global warming.

Can central heating change warmth? The owner will go to the community property. If the property allows, you can install the radiators yourself.

At the same time, consider whether you have enough layers in your home to install radiators. To install the water temperature, it is necessary to occupy a height of 6 10 cm, you know, if the height of the house is not enough, plus the water temperature of 6 10 cm, it will suffocate and even affect the opening and closing of the door. However, there is also ultra-thin heating for families with insufficient height, which only occupies centimeters of floors, but the cost is higher than the cost of water temperature and electric heating, which is more than 400 won per square meter.

Central heating, you don't need to toss around, that's because central heating has a pipeline design, and then you engage in floor heating, which will have a great impact on the structure of the house, which may cause damage to the house, and the gains outweigh the losses.

Underfloor heating can be changed. But I think you should report to the property in advance, be sure to do it according to the requirements of the property, and don't change it without permission.

You can change it, if you can change it, you can change it, if you can't, you can find some professional people to build floor heating for your home.

No, because changing the floor heating yourself is easy to cause problems with the floor heating.

Summary. Hello, dear, as long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector. <>

Hello, dear, as long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector. <>

Dear, water floor heating to electric heating first of all, we should transform the water and electricity heating pipes into electric floor heating pipes, and then we can connect the power cord of the floor heating to the switch of electric floor heating, and turn on the power switch to use it normally, but there are still many factors to consider, so the transformation plan is also different, and the transformation cost is not the same. <>

Dear, water and electricity heating is water and floor heating, electric heating, heating pipelines, among which the warm ground brought by the water and mountain heating system can destroy the living environment of mites and other parasites, prevent the production of mold, and can effectively promote foot blood circulation, thereby improving the blood circulation of the whole body, promoting metabolism in the new city, and has an inhibitory effect on cardiovascular diseases, especially for the elderly and children, and has more prevention and treatment effects for patients with arthritis and cold legs. <>

Summary. Hello, the personal point of view is that if the community is radiator heating, it can be changed to floor heating. This is due to the fact that the heat source used for radiator heating and underfloor heating is the same, and the way they circulate is also the same.

Introduction: The first step is to install a manifold for underfloor heating somewhere in our room. That is to say, the water supply and return water brought from the outdoors should be connected to the water collector.

The second step is to design the heating pipes for the underfloor heating installed in our room, and then install the heating pipes for underfloor heating according to the drawings we designed. The third step is the backfilling of underfloor heating. The fourth step is the decoration of our indoor floor.

In this way, the entire underfloor heating is completed. Note: The first problem is that the spacing of the floor heating coil must be designed according to the temperature of our supply and return water.

Because we were originally radiators, it belonged to high-temperature water supply heating; After changing to underfloor heating, the spacing between the coils should be appropriately increased. The second point is that we must do a good job in the concealed acceptance of the pipeline.

Can the heating be changed to underfloor heating.

Hello, the personal point of view is that if the community is radiator heating, it can be changed to floor heating. This is due to the fact that the heat source used for radiator heating and underfloor heating is the same, and the way they circulate is also the same. Introduction:

The first step is to install a manifold for underfloor heating somewhere in our house. That is to say, the water supply and return water brought from the outdoors should be connected to the water collector. The second step is to design the heating pipes for the underfloor heating installed in our room, and then install the heating pipes for underfloor heating according to the drawings we designed.

The third step is the backfilling of underfloor heating. The fourth step is the decoration of our indoor floor. In this way, the entire underfloor heating is completed.

Note: The first problem is that the spacing of the floor heating coil must be designed according to the temperature of our supply and return water. Because we were originally radiators, it belonged to high-temperature water supply heating; After changing to underfloor heating, the spacing between the coils should be appropriately increased.

The second point is that we must do a good job in the concealed acceptance of the pipeline.

What are the concerns about the transformation of radiators to floor heating: the first concern is the design of indoor floor heating mentioned above. If we change the radiator to floor heating, I personally recommend that you find a professional floor heating company to design for us.

When designing, we must design according to the actual water supply and return in our home. The second problem that needs to be paid attention to is that after we change the radiator to floor heating, we need to lay heating pipes on the ground, which will reduce the height of our indoor net control by at least 60mm. The third issue that needs to be paid attention to is that it is best to install a filter in front of the underfloor heating manifold we have installed.

At the same time, a thermometer and a pressure gauge are installed on the right side of the manifold. This makes it possible to observe the pressure and temperature in our network in a timely manner.

Abstract: If you want to change the heating of water heating to electric water heating in your own home, you only need to connect the inlet and outlet pipes of the electric water heater to the floor heating and water collector.

It is connected to the interface of the two valves in the figure below.

Note: 1. Add a circulating water pump between the electric water heater and the water collector. 2. The circulating water pump should have a temperature controller.

How to change water floor heating to electric heating.

If you want to change the heating of collective heating to electric boiling water heating in your own home, you only need to connect the inlet and outlet pipes of the electric water heater to the floor heating and water collector. It is connected to the interface of the two valves in the figure below. Note:

1. Add a circulating water pump between the electric water heater and the water collector. 2. The circulating water pump should have a temperature controller.

If you want to change your 100 flat water floor heating to fire, is it okay to use electricity for dual purposes? How much does it cost?

This depends on your local fees.

How much does the retrofit cost?

That's a few thousand dollars according to us.

Is it OK to add electric heating to a heating boiler? Can it be used for both thermal and electric purposes? OK.

Heating to geothermal is feasible.

But consider whether it is 24-hour heating, if not, it is recommended not to change the geothermal heat. When laying geothermal heat, it is necessary to pay attention to the joint seat of 1 water separator must be connected, and the geothermal pipeline of each component of water separator should be kept the same number of meters as far as possible, so as to reduce the problem of water diversion, and it is best to exceed the level when laying geothermal heat, so as to prevent the uneven phenomenon at the interface between the floor tile and the floor.

Geothermal heating and heating package heating, that method is both cost-effective and effective. It can be said with certainty that it is better to use geothermal methods, first, the heating package is omitted, the space of the living room is expanded, and the room appears spacious; The second is that people have a particularly comfortable feeling in it.

This is something that cannot be felt with regular heating equipment. If you want to save money, geothermal will definitely not be done. Because the heating is already installed when the house is moved in, you don't need to spend money.

And you have to pay for it yourself to install geothermal heat. If you use gas as the heat source, not only will the large-capacity gas water heater cost money, but the cost will exceed the cost of central heating for a heating period. It doesn't matter if the economic conditions are good, if the conditions are generally not to use a gas stove.

If you use hot water from central heating as a heat source, you can pay the heating fee according to the regulations, and you just spend an extra one-time investment in geothermal installation fees, which is still very suitable. However, please note that the property management company generally does not agree to the residents to use the heat source of central heating to install geothermal heat, because the geothermal pipeline is too long, which will affect the heating effect of the whole building.

If you want to install geothermal heat, you can greet the property in advance to avoid trouble. Before buying a house, with the consent of the developer, I removed the heating package and installed geothermal heat using the central heating pipeline, and the heating effect was surprisingly good, and the neighbors were envious. But then someone also wanted to change it to geothermal heat, but the property did not agree to change it.

I will provide you with my experience and thoughts for your reference.