I have three teeth to be crowned and would like to ask what crown is the most suitable

First: What the doctor said was magnetic resonance, but it was not allowed to contain metal components in the body while doing it. All-porcelain will not have an effect, pure titanium is not too clear. There is no illness in the body, so there is no need to listen to his white call. It's not a big illness, who is going to do it!?

Second: As for **,**'s** are all different.

Third: the service life of pure titanium and ordinary porcelain is very large. Most of the other porcelains are not very different, because pure titanium is the easiest porcelain to break (the adhesion between pure titanium and porcelain powder is the worst).

The porcelain powder on the outside of the porcelain is mostly the same (except for a few pieces), and only the inner crown can distinguish the difference between the porcelain teeth.

Fourth: If the aesthetics can be put last. Then I recommend casting crowns (steel crowns), and if conditions permit, make pure titanium crowns (non-pure titanium porcelain crowns). Except for the color that is not good-looking, everything else is good. For porcelain, cobalt-chrome porcelain is preferred.

In addition: pure titanium is titanium metal + porcelain powder. Porcelain collapse is risky.

It is best to make zirconia all-ceramic teeth. Now I do not advocate making porcelain teeth with metal.

I still think that getting your teeth repaired depends on your financial situation! If your home is in better condition! It is better to restore the best all-porcelain porcelain!

1. Pure titanium or all-ceramic will not block rays, but ordinary metals will not!

2. The ** of pure titanium is indeed relatively high, and the ** of each place is not the same!

3. The gap between ordinary porcelain and high-grade porcelain is definitely very large, and the gums will tell you after 3-5 years of use! The metal in ordinary porcelain contains many other mineral impurities, which will be reflected in a small part of the human body! Everyone has money to think about doing a good job of teeth, and ordinary ones don't need to think too much!

4。Nowadays there are many types of teeth, and the economic situation is medium, consider bio-baking porcelain nano-bio-like! The economy is relatively abundant ** class all-porcelain porcelain!

Pure titanium does not need to install the risk of porcelain breaking, especially for your posterior teeth! You can consider making zirconia all-ceramic teeth and German Zekang computer all-porcelain (expensive, but the effect is good!) ）

The innermost two large teeth on the right are missing? So how do you do a crown, is it free and missing, and if so, do you want to do a single-ended fixed bridge? Don't do it, wear the front tooth badly, if your home is in better condition! It is best to implant teeth, and it is okay to remove them if they are not easy to do.

First of all, you need to make sure how many braces you want to make, for example, if you need to make a crown, then you need to grind the two adjacent teeth next to the missing tooth to make a bridge for the missing tooth to fix the missing tooth.

After it is confirmed, it is injected with anesthetic, which is a little painful, but the pain now is not painful in the near future.

Then start grinding your teeth, except for the part that touches the gums, and grind it evenly in one circle, because you have to put the braces on. This grinding is a relatively long process, but fortunately, it will not be painful with anesthetic.

After grinding, the dentist will use a specific mold to take the shape of your full set of teeth, which is a blue-blue quick-coagulating substance. She or he will make you bite and don't move for a minute and a half, and after a minute and a half the blue thing freezes, and then it is taken out, and your teeth are on top.

Then the dentist will give you a temporary braces, which are usually made of plastic, and then you will need to wear these plastic braces for a few days while waiting for the porcelain teeth to be processed.

Then the dentist will take out several different colored teeth, let you compare the color, what A1, A2, to see which one is closer to the color of your teeth, and then use this color for porcelain teeth.

Then wait, after a few days the porcelain teeth are processed, you go to the dentist and the dentist will remove your plastic braces and replace you with elegant and beautiful porcelain braces.

If you are going to have a dental implant, then you need to do the root in the early stage, and the root will take a long time, because it will take about 3-4 months to make the crown after you have to penetrate your alveolar bone to make the two grow closely. The steps of making this crown are the same as those mentioned above, but also by biting the tooth mark, but the implant will not hurt the two adjacent teeth, and which one is missing can be filled.

Making a crown is actually another way of saying making porcelain teeth. Generally, if the tooth nerve is removed (killed) the tooth has no nutrient supply, it will slowly become brittle and discolored, and the discoloration is a trivial matter, the key is that the tooth becomes brittle and is easy to collapse when eating, and the tooth that is split off is destroyed, and the previous ** is in vain and can only be extracted. Therefore, after killing the nerve, the doctor will recommend that you have a porcelain tooth (i.e. a crown).

The lifespan of this crown varies from person to person, but the longer the life span is the one with good protection and good healing. After the crown is done, be careful not to bite into something too hard or sticky, and brush your teeth carefully at the seam of your gums.

How long does it take to make a crown front tooth?

It's troublesome, anti-inflammatory, burns nerves, anti-inflammatory and cleans, gnashes tooth marks, and puts crowns.

Hello! Crown restoration refers to the braces made by Sakura Yu after a tooth is seriously damaged and other reasons, which plays a protective role. The sleeve can be metal or porcelain.

A porcelain bridge is a dental prosthesis method for restoring a tooth that has been extracted, and it is a fixed denture. It is made by grinding the teeth on both sides of the missing tooth and using it as a support abutment tooth, making a porcelain crown on it, connecting it with the missing tooth to form a "bridge" look. It can be seen that the crack Songchang is a multiple crown repair connected together.

The choice of crown needs to take into account the specific situation of the patient, and there are three main types:

1. Metal casting crown. The biggest advantage of this kind of crown is that the amount of tooth preparation is small and cheap, and the disadvantage is relatively clear, that is, the color is not good-looking, and the aesthetics are poor.

2. Metal porcelain crown. This kind of crown will be decorated with porcelain crown outside the metal crown to achieve an economical and beautiful effect, but the disadvantage is that the outer layer of the porcelain crown is prone to porcelain collapse.

3. All-porcelain crown. This kind of crown does not contain metal, all of which are synthesized from ceramic, which can not only achieve the aesthetic effect similar to that of real teeth, but also has excellent hardness, and will not affect the MRI effect, and its disadvantage is that it is higher.

Dental crown precautions.

Keep the oral cavity clean, in addition to normal brushing, you need to use dental floss and interdental brush to clean between the teeth to keep the teeth clean, so that the teeth are not prone to other problems such as insect teeth, and the healing of teeth can be better.

The crown material is mostly porcelain or all-porcelain material, which has a certain degree of brittleness, so try to avoid suddenly subjecting it to a lot of force when eating, such as trying to bite something particularly hard with the crown as much as possible, such as nuts and crabs, and try not to use dentures to pick up wine bottles, etc., to avoid porcelain or all-porcelain cracking.

Cobalt-chromium alloys, titanium alloys, and all-titanium alloys generally cause blackening of the gums, and titanium alloys are highly biocompatible, but they are more expensive than cobalt-chromium alloys. Cobalt-chrome alloys are cheaper.

It doesn't matter if the crown is ***, you can only say which one is more suitable for you, and you can consult the dental institution to the end. Listen to your doctor's advice and ask him or her to explain why they are recommended and why they are not.

Zirconia all-porcelain is the best! Pure gold crown is the most valuable!

There are two series, one is the casting series, the other is the porcelain series, such as Aimei must make porcelain, if there is a condition, it is the best to do zirconia all porcelain, and the most important is to do mid-grade cobalt chrome porcelain. If you don't love beauty, you can do casting cobalt-chrome alloy steel crowns, save money and do it once and for all.

Pure titanium is the best, but slightly more expensive. Cobalt chromium has no negative effect, Europe and the United States are using cobalt chromium, moderate. Titanium alloy is not good, it only contains about five percent of titanium, which is useless.